Processing » Thermoforming

Search By Manufacturer

Search By Country

Building Filters

1187

Used Thermoforming

  • Trusted Seller
    1990 HEARTLAND HIL 3648

    1990 HEARTLAND HIL 3648

    • Manufacturer: Heartland RV

    SPECIFICATIONS Max Mold Size 36″ x 48″ Top Oven Infrared Oven Elements Bottom Oven Infrared Oven Elements Top & Bottom Oven Zones 26 / 26 Top Platen Stroke 12″ Bottom Platen Stroke 6″ Cutler Hammer PLC Controller...

    Valley Cottage, NY
  • Trusted Seller
    1989 GN 3021

    1989 GN 3021

    • Manufacturer: GN

    Maximum Standard Forming Pressure Capacity: 100 PSI Material Capacity: Up To 32″ Width of Standard Packaging Sheet and Films, 0.0075″ to 0.030″ in Thickness Cutting Capacity: 0.0075″ to 0.030″ in Thickness, Up To...

    Valley Cottage, NY
  • Trusted Seller
    2015 Modern Machinery 28'' x

    2015 Modern Machinery 28'' x 42''

    • Manufacturer: Modern Machinery

    · Machine built in 2015 · Max tool size is 28” x 42” · Max roll width 30” · Approx. size 8’ x 50’ x 10’ · Approx. weight 20,000 lbs · Machine comes with 5 HP Busch vacuum pump with 120 gallon vacuum reservoir tan...

    Valley Cottage, NY
  • Trusted Seller
    GN 2220

    GN 2220

    • Manufacturer: GN

    Used GN Model 2220 Platen Forming Area 22" x 20" 480/30/ 3 Phase Currently under power

    Valley Cottage, NY
  • Trusted Seller
    GN 1407TM

    GN 1407TM

    • Manufacturer: GN

    GN 1407 TM Specs Machine specifications PROVIDED BY MFG GN1407TM *Specs provided by manufacturer and are approximate Equipment completely refurbished in 2017, Not the actual machine [embed] Machine specifications

    Valley Cottage, NY
  • Trusted Seller
    1995 BROWN MACHINE CS-4500

    1995 BROWN MACHINE CS-4500

    • Manufacturer: BROWN MACHINE

    Used BROWN CS-4500 THERMOFORMING LINE, new 1995 40W X 42L MAX MOLD, MAX MOLD 7″ MAX DEPTH OF DRAW ABOVE & BELOW SHEET LINE, 42″ MAXIMUM SHEET WIDTH, INDRAMAT 3 AXIS SERVO CONTROLLER 168″ LONG 4-STOP CAL-RAD BOTTO...

    Valley Cottage, NY
  • Trusted Seller
    LYLE INDUSTRIES 50" wide complete

    LYLE INDUSTRIES 50" wide complete line with 9" depth of draw

    • Manufacturer: LYLE INDUSTRIES

    LYLE MODEL 50 THERMOFORMER 200″ LONG OVEN WITH QUARTZ TOP ELEMENTS AND CALROD BOTTOM, 50″, 50″W X 50″L MAXIMUM MOLD SIZE, 53″ MAXIMUM SHEET WIDTH, MAXIMUM 9″ DRAW UP AND DOWN, 16″ BOTTOM STROKE, 11″ TOP STROKE, H...

    Valley Cottage, NY
  • Trusted Seller
    2025 FORMECH 508DT

    2025 FORMECH 508DT

    • Manufacturer: FORMECH

    Max Depth of Draw / Max Tool Height (mm/inches): 185 / 7.3 Max Material Thickness (mm/inches): 6 / 0.25 Single Phase Power Requirements: 208-240V / 13A Pump Flow (SCFM @ 0 in. / 60Hz) (Pump flow m3 /h @ 0mbar / 5...

    Valley Cottage, NY
  • Trusted Seller
    2024 FORMECH 300DT

    2024 FORMECH 300DT

    • Manufacturer: FORMECH

    The brand new 300DT is Formech's smallest desktop machine to date. Keeping the functionality of its predecessor, the Compac Mini, the 300DT is smaller in volume and lighter than ever. Compared with other compact ...

    Valley Cottage, NY
  • Trusted Seller
    2025 FORMECH 450DT

    2025 FORMECH 450DT

    • Manufacturer: FORMECH

    Max Depth of Draw / Max Tool Height (mm/inches): 160 / 6.3” Max Material Thickness (mm/inches): 6 / 0.25 Single Phase Power Requirements: 208-240V / 13A (EU) 110-120 / 15A (USA) Pump Flow (SCFM @ 0 in. / 60Hz) (P...

    Valley Cottage, NY
  • Trusted Seller
    2025 FORMECH 686

    2025 FORMECH 686

    • Manufacturer: FORMECH

    Forming capacity Power Single phase power requirements: 208-240V / 40A Heating Air Pump flow (SCFM @ 0 in. / 60Hz): 11 Dimensions

    Valley Cottage, NY
  • Trusted Seller
    2025 FORMECH 508FS

    2025 FORMECH 508FS

    • Manufacturer: FORMECH

    Forming capacity Power Single phase power requirements: 208-240V / 20A Heating Air Pump flow (SCFM @ 0 in. / 60Hz): 7.1 Dimensions

    Valley Cottage, NY
  • Trusted Seller
    1999 LYLE INDUSTRIES 40'

    1999 LYLE INDUSTRIES 40'

    • Manufacturer: LYLE INDUSTRIES

    Lyle Pre Heat Oven 43" high by 80" tall Length: 40.0 in

    Valley Cottage, NY
  • Trusted Seller
    1989 LYLE INDUSTRIES 140FM

    1989 LYLE INDUSTRIES 140FM

    • Manufacturer: LYLE INDUSTRIES

    Used Lyle 40 x 40 Thermoformer Model 140 FM New in 1989 Max Mold 40''x40'' Top Oven Quartz - 29 Zones total top and bottom Bottom Oven Carlod - Draw Depth 6.0'' Platen Stroke 7.0'' Form Station Tonnage 80 Top Pla...

    Valley Cottage, NY
  • Trusted Seller
    LYLE INDUSTRIES 140P2

    LYLE INDUSTRIES 140P2

    • Manufacturer: LYLE INDUSTRIES

    Used Lyle 40 x 40 Thermoformer Model 140 FH New in 1995 Max Mold 40''x40'' Top Oven Quartz - 29 Zones total top and bottom Bottom Oven Carlod - Draw Depth 6.0'' Platen Stroke 7.0'' Form Station Tonnage 80 Top Pla...

    Valley Cottage, NY
  • no-image_en.png

    Illig RDK54 Thermoforming

    • Manufacturer: Illig
    • Model: RDK54

    Good condition Illig RDK54 Thermoformings manufactured in 1995. Located in Germany and other countries. Click request price for more information.

    Germany
89101112

Overview

Thermoform packaging involves heating a plastic sheet until it becomes pliable and then forming it into a specific shape using a mold. This type of packaging is commonly used for consumer goods, electronics, food, and medical products due to its flexibility, durability, and cost-effectiveness. It can be customized to fit the unique dimensions of the product, ensuring protection and aesthetic appeal.

FAQ

What materials are commonly used in thermoform packaging?

Common materials include PET, PVC, HIPS, and PP. Each material has different properties suited for various applications, such as food safety or durability.

How can I ensure the quality of thermoform packaging?

Check for consistent thickness, clarity, and uniformity in the packaging. Ensure that the molds are precisely made to avoid defects.

What are the shipping considerations for thermoform packaging?

Ensure that the packaging is securely packed to avoid deformation during transit. Use appropriate protective materials and consider the volume and weight for shipping costs.

What maintenance is required for thermoform packaging machinery?

Regularly inspect the heating elements, molds, and forming stations. Clean the machinery to prevent contamination and ensure it operates at optimal efficiency.