Machine Tools » Threading & Tapping

Search By Manufacturer

Search By Country

Building Filters

3846

Used Threading & Tapping

  • Trusted Seller
    2002 KINEFAC MC-4

    2002 KINEFAC MC-4

    • Manufacturer: KINEFAC

    Equipped With Max. Threading Diameter (In-feed): 1-1/2" Max. Thread Diameter (Thru-feed): 3/4" Min. Diameter Infeed or Thrufeed: 1/32"

    Vaughan, Canada
  • Trusted Seller
    REED A23

    REED A23

    • Manufacturer: Reed
    • Model: A23

    Equipped With Min. - Max. Threading Diameter (In-feed): 1/4" - 3-3/4" Min. - Max. Thread Diameter (Thru-feed): 1/4" - 1" Maximum Thread Length (In-feed): 2-3/8" Maximum Thread Length (Thru-feed): 11"

    Vaughan, Canada
  • Trusted Seller
    MACHINES & TECHNOLOGIES BBW

    MACHINES & TECHNOLOGIES BBW

    • Manufacturer: MACHINES & TECHNOLOGIES

    Equipped With THREAD ROLLING MACHINE TYPE BBW ? The upper die ? which is the longer one of the two dies ? is mounted on a movable slide. ? The lower, fi xed die is clamped into the height-adjustable die pocket by...

    Vaughan, Canada
  • Trusted Seller
    2013 TESKER 230

    2013 TESKER 230

    • Manufacturer: TESKER

    Equipped With Max. Threading Diameter Up To 2-1/2" * Spindle Speeds VARIABLE * Complete with Hydraulic Pump and Tank

    Vaughan, Canada
  • Trusted Seller
    2021 GOVAMA HK25

    2021 GOVAMA HK25

    • Manufacturer: GOVAMA

    Equipped With Min. Threading Diameter (In-feed): 3 0.118) Max. Threading Diameter (In-feed): 48mm (1.889”) Maximum Thread Length (In-feed): 170mm (6.692") * Heavy duty 3”dia spindles * 7” Rexroth PLC control scre...

    Vaughan, Canada
  • Trusted Seller
    REED B105

    REED B105

    • Manufacturer: Reed

    Equipped With *In Feed and Thru Feed Capability *Quick setup features *Work support tooling on a fixed centerline *Hydraulically actuated *Direct drive motor/gearbox ass'y *AC inverter variable speed control *Equ...

    Vaughan, Canada
  • Trusted Seller
    2007 VIDEX VAS-20BRH

    2007 VIDEX VAS-20BRH

    • Manufacturer: Videx

    Equipped With Machine setup for Radiator Hooks with a press in the center ** For production of bent bolts with threads on one end, such as eye bolts & anchor bolts >>Fully Automatic production from Wire Coil, Str...

    Vaughan, Canada
  • Trusted Seller
    VIDEX

    VIDEX

    • Manufacturer: Videx

    Equipped With * Fully Automatic Specialty Bolt Machines >> Single / Double End? U-Bolts, Eye Bolts, Anchor Bolts, Threaded Studs, Chamfered Parts and more * High Speed Planetary Thread Rollers * High Speed Nail R...

    Vaughan, Canada
  • Trusted Seller
    2024 GOVAMA HK-18

    2024 GOVAMA HK-18

    • Manufacturer: GOVAMA

    Equipped With Like new, never used in production ? Three sets of 9 pitch dies (6") ? Three sets of 14 pitch ? 1 set of 16 pitch ? All end feed dies ? End Feed Max. Threading Diameter Up To 2-1/2" Location:

    Vaughan, Canada
  • Trusted Seller
    2013 GOVAMA 3R-9

    2013 GOVAMA 3R-9

    • Manufacturer: GOVAMA

    Equipped With **Safety Features *All pinch points guarded with covers *All covers have coded magnet safety interlock switches *2 handed control for jog or automation process *System must be reset after e-stop act...

    Vaughan, Canada
  • Trusted Seller
    WATERBURY #100

    WATERBURY #100

    • Manufacturer: Waterbury Farrel

    Equipped With * Rebuilt Max. Thread Dia. x Length (Hot rolled): 2"x4-1/2" Max. Thread Dia. x Length (Cold rolled): 1-1/2"x4-1/2" OR Max. Thread Dia. x Length (Cold rolled): 1"x8"

    Vaughan, Canada
  • Trusted Seller
    GOVAMA Model ROT-1 (25ton)

    GOVAMA Model ROT-1 (25ton)

    • Manufacturer: GOVAMA

    Equipped With Specifications: Features: > The ROT-1 machine has been designed & produced to meet ball stud producers with high volume demand > There are total of 2 stations for different rolling forms. At station...

    Vaughan, Canada
  • Trusted Seller
    GOVAMA Model GPM-50

    GOVAMA Model GPM-50

    • Manufacturer: GOVAMA
    • Threading length: 200 millimeter

    Equipped With Specifications: Performance (Cylcle time for 1200mm total lgth): Features: The GPM series models offer single or double ended thread rolling, from diameters of 6-33mm (1/4"-1-1/4") either via the st...

    Vaughan, Canada
  • Trusted Seller
    GOVAMA Model HK-25 (25Ton)

    GOVAMA Model HK-25 (25Ton)

    • Manufacturer: GOVAMA

    Equipped With Specifications: Features: > The HK series of hydraulic rolling machines are equipped with two rolling spindles, with one moving head. > All machines equipped with AC Variable Speed Drives, & Swivel ...

    Vaughan, Canada
  • Trusted Seller
    GOVAMA Model HK-85 (85Ton)

    GOVAMA Model HK-85 (85Ton)

    • Manufacturer: GOVAMA

    Equipped With Specifications: Features: > The HK series of hydraulic rolling machines are equipped with two rolling spindles, with one moving head. > All machines equipped with AC Variable Speed Drives, & Swivel ...

    Vaughan, Canada
  • no-image_en.png

    Ingramatic RP-1 Threading & Tapping

    • Manufacturer: Ingramatic
    • Model: RP-1

    Good condition Ingramatic RP-1 Threading & Tappings available between 1979 and 1982 years. Located in Italy and other countries. Click request price for more information.

    Italy
3031323334

Overview

Threading and tapping machines are used in manufacturing to create threads inside holes (tapping) or on the exterior of components (threading). These machines are essential for producing threaded parts that fit together with screws, bolts, or other fasteners, ensuring precision and consistency in mechanical assemblies.

FAQ

What factors should I consider when buying a used threading or tapping machine?

Consider the machine's age, condition, and maintenance history. Check for any signs of wear or damage and ensure it meets the specific threading and tapping requirements of your projects.

How can I safely ship a threading or tapping machine?

Use a reliable transport service that specializes in heavy machinery. Ensure the machine is securely fastened and properly protected to avoid damage during transit.

What maintenance is required for threading and tapping machines?

Regular maintenance includes lubricating moving parts, checking for wear and tear on essential components, and ensuring the machine's calibration remains accurate. Refer to the manufacturer's manual for a detailed maintenance schedule.