Used Threading & Tapping

1994 National Formax FX44LF

• Manufacturer: National

Equipped With Features : #30 Thread Roller FXT-F Pointer PKO Trimming 1-2 extra formapak

AMBA Hydraulic Rod Header

• Manufacturer: AMBA

Equipped With Specifications: * Six Models: Size Range: 10 - 20mm Features: These machines are suitable for Upsetting, Extruding, Collar Work, Etc. A single machine can perform the following operations fully auto...

ROD CHOMPER HRH

• Manufacturer: ROD CHOMPER

Equipped With These machines are suitable for Upsetting, Extruding, Collar Work, Etc. A single machine can perform the following operations fully automatically: ? Cutting of up to a 12 mm | 0.5 ? diameter rod ? P...

TAPMATIC NCR-IA #10-1/2 TAPPIN UNIT

TAPMATIC NCR-IA #10-1/2 TAPPIN UNIT

PRUTTON 125B-HV

• Manufacturer: Prutton
• Model: 125B-HV
• Threading length: 76.19999999999999 millimeter

Equipped With * Twin Ferris Wheel Feeder Drums Max. diameter: 1/4" | Max. thread length: 3" | Underhead blank length: 3" | Speed: 600-800 ppm (up to 1800ppm w/air jet feed) | Hopper capacity: 120 lbs

1975 National 6L4

• Manufacturer: National
• Model: 6L4
• Threading length: 44,449.99999999999 millimeter

Maximum cutoff diameter: .375 inches | Number of dies: 4 | Maximum cutoff length: 4.5 inches | Maximum kickout length: 3.125 inches | Minimum kickout length: .750 inches | Minimum cutoff length: .875 inches | Ma...

3/4″ National 4DIE BOLTMAKER

• Manufacturer: National
• Model: 3-4
• Threading length: 78 millimeter

Equipped With Max cutoff diameter: 22 mm (.866") | Min/max kickout: 30 - 160 mm (1.181" - 6" | Min/max cutoff length: 38 - 200 mm (1.496" - 7.874") | Max thread length: 78 mm (3") | Max output: 90 PPM | Heading l...

National 10L4

• Manufacturer: National
• Model: 10L4

Equipped With * IFO Transfer Location: Number of dies: 4 | Number of stations: 5 | Maximum wire diameter: 5/8" | Maximum length underhead: 4-3/8" | Min. length underhead: 1-1/8" | Max. cutoff length: 5-3/4" | Min...

Brankamp Process Monitors

• Manufacturer: BRANKAMP

Equipped With Specifications: Features: Process Monitors For use with * Cold Headers * Multi-Die Cold Formers * Thread Rolling Machines * Stamping Punch Presses * Forging Presses Featuring: * Easy to Use Handling...

1989 NUTAP MAS-08NV

• Manufacturer: Nutap

Maximum thread diameter: 8 millimeters | Minimum thread diameter: 4 millimeters | Biggest flange or max. outside dia.: 15 millimeters | Production rate: 15000 - 21000 Pcs/Hr

National 3/4″ x 7″

• Manufacturer: National
• Model: 3-4

Equipped With Features: PKO Trim Maximum cutoff diameter: 1 inches | Maximum wire diameter: .750 inches | Maximum cutoff length: 10 inches | Minimum cutoff length: 1.5 inches | Maximum kickout length: 7 inches | ...

DUMORE 1/2" DRILL & TAPPING MACHINE

• Manufacturer: Dumore

USED PRECISION AUTOMATIC DRILL/TAPPING MACHINE MFG. "DUMORE" SERIAL NUMBER 8436 MAX. SPINDLE TRAVEL 0" - 3" DRILLING CAPACITY 3/8" TAPPING CAPACITY 1/2" SINGLE / AUTO CYCLE MOTOR 3/4 HP/220-440/3/60

Snow Tapping Machine with Automatic Deep Hole Drilling Control Metalworking Equipment

• Manufacturer: Snow

“In good working condition” Snow Tapping Machine with Automatic Deep Hole Drilling Control