Machine Tools » Threading & Tapping

Search By Manufacturer

Search By Country

Building Filters

17

Used asset

  • Trusted Seller
    1971 LANDIS 6 Pipe Threading

    1971 LANDIS 6 Pipe Threading Machine

    • Manufacturer: Landis

    Used, Landis Model 6" Threading Machine Asset type: 73314

    Houston, TX
  • GEOMETRIC 9/16" "DS" STYLE THREADING

    GEOMETRIC 9/16" "DS" STYLE THREADING DIE HEAD w/ 3/4" SHANK

    • Manufacturer: Geometric

    GEOMETRIC 9/16" "DS" STYLE THREADING DIE HEAD w/ 3/4" SHANKMake: Geometric Const. No: F6756ECondition: Used, overall in great ShapeSize: 9/16"Style: DSSerial No: 900699-2Shank: 3/4" x 2-1/2"Bore Through Shank: 1/...

    Watertown, CT
  • Hypneumat LS300E 8706-B Tapping Unit

    Hypneumat LS300E 8706-B Tapping Unit W/1Hp Motor 3Ph 230/460V & Gear Reducer

    • Manufacturer: Hypneumat

    Hypneumat LS300E 8706-B Tapping Unit W/1Hp Motor 3Ph 230/460V & Gear Reducer 3" Stroke Pacemaker Main Motor Drive 230/460 Volt 3Ph Cont Duty Pacemaker Gear Reducer Input Rpm: 1800/Output Rpm: 280 6.2 Ratio FMC St...

    Watertown, CT
  • 45pcs Tap And Die Set

    45pcs Tap And Die Set High Speed Steel, 20 Thread Sizes (INCH), See Description

    • Manufacturer: Japan

    45pcs Tap And Die Set High Speed Steel, 20 Thread Sizes, See DescriptionMade In Japan 45 Pcs Set Of Taps And DiesNational Course And Fine Thread SizesCondition: Looks New, Barely UsedHigh Speed Steel No Imperfect...

    Watertown, CT
  • Hypneumat S24 Basic 4" Stroke

    Hypneumat S24 Basic 4" Stroke Tapping Unit w/ Procunier 2 Attachment

    • Manufacturer: Hypneumat

    4" Stroke Horizontal Tapping Unit Procunier Model: 2 Series: 12039 Tapping Attachment no Collets included Dayton Gear motor 2Z849 Ratio: 11:1 Asset In Stock And Available Immediately

    Watertown, CT
  • Reed Rico Model B-13 1/8"-13/16"

    Reed Rico Model B-13 1/8"-13/16" Roll Thread Attachments W/1" Max Thread Length

    • Manufacturer: Reed

    Reed Rico Model B-13 1/8"-13/16" Roll Thread Attachments W/1" Max Thread Length Advance and Alignment Compensators Anti-Friction Bearings Simple Prccise Roll Matching Dovetail Clamping Arrangement Please Note Pri...

    Watertown, CT
  • Trusted Seller
    NEW THREAD DRILL BUT WE

    NEW THREAD DRILL BUT WE SELL IT AS USED part number: 27047

      Hurry up! This product has already been viewed 2462 times! Don’t miss it! Highly recommended machine Condition: as good as new NEW DRILL-TAPPING MACHINE BUT WE SELL IT AS USED brand RUFFATI T...

      Mogliano Veneto, Italy
    • Oster Pipe Threader

      Oster Pipe Threader

      • Manufacturer: Oster

      Description Oster Pipe Threader Asset # 16997

      Alto, MI
    • Oster Pipe Threader

      Oster Pipe Threader

      • Manufacturer: Oster

      Description Oster Pipe Threader Asset # 16997

      Alto, MI
    • Ridgid 535 Pipe Threader 1/8″

      Ridgid 535 Pipe Threader 1/8″ – 2″ Pipe

      • Manufacturer: Ridgid

      Description Serial # 344115 Asset #9333 Specifications: Capacity 1/8″ to 2″ pipe 1/4″ to 2″ bolt Volts 115 Amps 8 amps Phase single phase HP 1/2 HP Approx. weight 400 lbs.

      Alto, MI
    • Ridgid 535 Pipe Threader, 1/8”

      Ridgid 535 Pipe Threader, 1/8” – 2” Capacity

      • Manufacturer: Ridgid

      Description Ridgid Model 535 Pipe Threader, 1/8” – 2” Capacity Serial # 673124 Asset # 13475 Specifications: Capacity 1/8” to 2” pipe 1/4” to 2” bolt Volts 115 Amps 8 amps Phase Single Phase HP 1/2 HP Approximate...

      Alto, MI
    • Ridgid 535 Pipe Threader, 1/8”

      Ridgid 535 Pipe Threader, 1/8” – 2” Capacity

      • Manufacturer: Ridgid

      Description Ridgid Model 535 Pipe Threader, 1/8” – 2” Capacity Asset # 11644 Specifications: Capacity 1/8” to 2” pipe 1/4” to 2” bolt Volts 115 Amps 8 amps Phase Single Phase HP 1/2 HP Approxim...

      Alto, MI
    • Ridgid 535 Pipe Threader, 1/8”

      Ridgid 535 Pipe Threader, 1/8” – 2” Capacity

      • Manufacturer: Ridgid

      Description Ridgid Model 535 Pipe Threader, 1/8” – 2” Capacity Serial # 380853 Asset # 12642 Specifications: Capacity 1/8” to 2” pipe 1/4” to 2” bolt Volts 115 Amps 8 amps Phase Single Phase HP ...

      Alto, MI
    • Ridgid 500A Pipe Threader, 1/8”

      Ridgid 500A Pipe Threader, 1/8” – 2” Capacity

      • Manufacturer: Ridgid

      Description Ridgid Model 500A Pipe Threader, 1/8” – 2” Capacity Asset # 10878 Specifications: Pipe Capacity 1/8” – 2” Bolt Capacity ¼” – 2” Reamer Positive Locking Chuck 3 Jaw Rear Centering Device ...

      Alto, MI
    • Ridgid 916 Power Driven Roll

      Ridgid 916 Power Driven Roll Groover

      • Manufacturer: Ridgid

      Description Ridgid Model 916 Power Driven Roll Groover Asset # 10885 Specifications: Capacity Stainless Steel, Schedule 10 1 1/4″ – 6″ Capacity Stainless Steel, Schedule 40 1 1/4″ – 3″ OPTIONAL Copper Capacity 2″...

      Alto, MI
    12

    Overview

    Threading and tapping machines are used in manufacturing to create threads inside holes (tapping) or on the exterior of components (threading). These machines are essential for producing threaded parts that fit together with screws, bolts, or other fasteners, ensuring precision and consistency in mechanical assemblies.

    FAQ

    What factors should I consider when buying a used threading or tapping machine?

    Consider the machine's age, condition, and maintenance history. Check for any signs of wear or damage and ensure it meets the specific threading and tapping requirements of your projects.

    How can I safely ship a threading or tapping machine?

    Use a reliable transport service that specializes in heavy machinery. Ensure the machine is securely fastened and properly protected to avoid damage during transit.

    What maintenance is required for threading and tapping machines?

    Regular maintenance includes lubricating moving parts, checking for wear and tear on essential components, and ensuring the machine's calibration remains accurate. Refer to the manufacturer's manual for a detailed maintenance schedule.