Building Filters
- Trusted Seller
TIN KNOCKER THE WIZARD
- Manufacturer: Tin Knocker
TIN KNOCKER 5 ft x 10 ft The Wizard HVAC Plasma Cutting System was developed specifically for the HVAC contractor/fabricator. Currently in stock and ready to ship! PLUG & PLAY!Includes full HVAC Software. 5’x10’ ...
- Trusted Seller
TIN KNOCKER TK5
- Manufacturer: Tin Knocker
TIN KNOCKER Liner Table has a max roll width of 5 feet.The Tin Knocker manual insulation cutter slits fiberglass insulation to length and width.Once the material is at the desired length the operator pulls the ha...
$3,905 USDPort Orange, FL - Trusted Seller
TIN KNOCKER TK 816
- Manufacturer: Tin Knocker
- Model: TK816
TIN KNOCKER TK 816 Manual Leaf Brake has a bending length of 8 feet and capacity of 16 gauge. These are industrial quality brakes, the kind you use over a lifetime. Our straight brakes set the standard for qualit...
- Trusted Seller
TIN KNOCKER TK1
- Manufacturer: Tin Knocker
- Model: TK1
TIN KNOCKER TK1 throatless Hand Shear has a mild steel max capacity of 14 gauge.With these shears virtually any desired cut can be made with most metals. Designed to be bench mounted. Unique shoulder design that...
$575 USDPort Orange, FL - Trusted Seller
TIN KNOCKER TK 1624
- Manufacturer: Tin Knocker
- Model: TK1624
TIN KNOCKER TK 1624 is a Slitter with 16 gauge capacity.The TK1624 is a Sturdy 24 inch throat slitter with quick adjusting back gauge and scale. TK 20 Ga and 16 Ga Slitters: Sturdy 24 inch throat slitters with qu...
$4,270 USDPort Orange, FL - Trusted Seller
TIN KNOCKER TK 2024
- Manufacturer: Tin Knocker
- Model: TK2024
TIN KNOCKER TK 2024 Slitter has a capacity of 20 gauge and 24 inch throat. The motor is 1/2 hp and 115 volt. Has quick adjusting back gauge and scale. TK 20 Ga and 16 Ga Slitters: Sturdy 24 inch throat slitters w...
$3,570 USDPort Orange, FL - Trusted Seller
TIN KNOCKER TK FOURPLEX
- Manufacturer: Tin Knocker
- Model: TK FOURPLEX
TIN KNOCKER Fourplex S & Drive Cleat Former w/Slitter Attachment has a capacity of 20 gauge. The motor is 5 HP (1,800 RPM) 230 Volt, 3 Phase, 60 Hz. Comes standard with S & Drive Slitter to turn scrap into useful...
- Trusted Seller
TIN KNOCKER TK1016
- Manufacturer: Tin Knocker
- Model: TK1016
TIN KNOCKER TK 1016 Hydraulic Duct Notcher has a mild steel capacity of 16 gauge. This 5 headed gang notcher is a fast and easy way to notch sheet metal ducting, in preparation to receive bar, S Cleats and Drive ...
- Trusted Seller
TIN KNOCKER TK 1652
- Manufacturer: Tin Knocker
- Model: TK1652
TIN KNOCKER TK 1652 Foot Operated Shear has a shearing length of 52 inches and a mild steel capacity of 16 gauge.Has Precise gauging, beefy hold downs for shearing accuracy and Easy to operate.Comes with 25 inch...
$4,690 USDPort Orange, FL - Trusted Seller
TIN KNOCKER TK 2450
- Manufacturer: Tin Knocker
- Model: TK2450
TIN KNOCKER TK2450 Manual Slip Roll has a forming length of 50 inches and 24 gauge capacity.The Tin Knocker 50 inch Slip Roll is industrial strength. Precision machined and ground from high carbon steel, these ro...
$2,045 USDPort Orange, FL - Trusted Seller
TIN KNOCKER TK3618
- Manufacturer: Tin Knocker
The Tin Knocker 3618 Power Cleat Bender is a heavy-duty, air-powered machine, designed for high-volume and high-speed production. Built for accuracy, repeatability, and long-term durability, it forms cleats on ma...
- Trusted Seller
TIN KNOCKER TK36
- Manufacturer: Tin Knocker
- Model: TK36
The Tin Knocker No 36 Button Punch Cheek Bender is perfect for fabricating fittings. One side makes a right-angle flange with button punch while the other side makes 2 different size right angle flanges.Self-co...
- Trusted Seller
TIN KNOCKER TK2
- Manufacturer: Tin Knocker
- Model: TK2
TIN KNOCKER TK2 throatless Hand Shear has a mild steel max capacity of 10 gauge.With these shears virtually any desired cut can be made with most metals. Designed to be bench mounted.Unique shoulder design that ...
$675 USDPort Orange, FL - Trusted Seller
TIN KNOCKER TK18
- Manufacturer: Tin Knocker
- Model: TK18
TIN KNOCKER 18 Station Hand Turret Punch TK 18 has a capacity of 8 tons x 18 inch throat depth.A fast, accurate and flexible method of punching in the shop. The solid cast and machined C frame and precision machi...
- Trusted Seller
TIN KNOCKER TK 24
- Manufacturer: Tin Knocker
- Model: TK24
TIN KNOCKER TK24 Pittsburgh Roll Former with Stand and Flanger Attachment has a 24 gauge mild steel capacity. Portable rollformer is a work horse for 24 gauge and lighter material. Portable rollformer is a work h...
$3,860 USDPort Orange, FL 
Tin Knocker TK18 Punch Machine
- Manufacturer: Tin Knocker
- Model: TK18
Good condition Tin Knocker TK18 Punch Machines. Located in USA and other countries. Click request price for more information.
USA