- Trusted Seller
TIN KNOCKER TK18
- Manufacturer: Tin Knocker
- Model: TK18
TIN KNOCKER 18 Station Hand Turret Punch TK 18 has a capacity of 8 tons x 18 inch throat depth.A fast, accurate and flexible method of punching in the shop. The solid cast and machined C frame and precision machi...
- Trusted Seller
TIN KNOCKER TK1016
- Manufacturer: Tin Knocker
- Model: TK1016
TIN KNOCKER TK 1016 Hydraulic Duct Notcher has a mild steel capacity of 16 gauge. This 5 headed gang notcher is a fast and easy way to notch sheet metal ducting, in preparation to receive bar, S Cleats and Drive ...
- Trusted Seller
TIN KNOCKER TK 1655
- Manufacturer: Tin Knocker
- Model: TK1655
TIN KNOCKER TK1655 Manual Corner Notcher has a mild steel capacity of 16 gauge.Heavy versatile tool notches but also does shearing and piercing operations in lighter gauge.Heavy cast iron and fabricated construct...
$1,270 USDPort Orange, FL - Trusted Seller
TIN KNOCKER TK EDGE NOTCER
- Manufacturer: Tin Knocker
TIN KNOCKER Edge Notcher has a mild steel capacity of 20 gauge. The motor is 1/3 HP, 110 volt, Single Phase, 60Hz AC.Round surface edges for collars and end caps.INCLUDES BOTH SETS OF TOOLING, 1 machine to 2 notc...
$2,740 USDPort Orange, FL - Trusted Seller
TIN KNOCKER TK1016 LEAF
- Manufacturer: Tin Knocker
- Model: TK1016
TIN KNOCKER TK 1016 Manual Leaf Brake has a bending length of 10 feet and capacity of 16 gauge. These are industrial quality brakes, the kind you use over a lifetime. Our straight brakes set the standard for qual...
- Trusted Seller
TIN KNOCKER TK DRIVE CLEAT NOTCHER
- Manufacturer: Tin Knocker
TIN KNOCKER Drive Cleat Notcher has a mild steel capacity of 22 gauge.This tool notches drive cleats giving drives a rounded end for an easier installation. Notch drive cleats before or after they are formed. Eas...
$550 USDPort Orange, FL - Trusted Seller
TIN KNOCKER THE WIZARD
- Manufacturer: Tin Knocker
TIN KNOCKER 5 ft x 10 ft The Wizard HVAC Plasma Cutting System was developed specifically for the HVAC contractor/fabricator. Currently in stock and ready to ship! PLUG & PLAY!Includes full HVAC Software. 5’x10’ ...
- Trusted Seller
TIN KNOCKER TK 24
- Manufacturer: Tin Knocker
- Model: TK24
TIN KNOCKER TK24 Pittsburgh Roll Former with Stand and Flanger Attachment has a 24 gauge mild steel capacity. Portable rollformer is a work horse for 24 gauge and lighter material. Portable rollformer is a work h...
$3,860 USDPort Orange, FL - Trusted Seller
TIN KNOCKER TK 24
- Manufacturer: Tin Knocker
- Model: TK24
TIN KNOCKER TK24 Pittsburgh Roll Former with Stand and Flanger Attachment has a 24 gauge mild steel capacity.Portable rollformer is a work horse for 24 gauge and lighter is available with power flanging attachmen...
$3,270 USDPort Orange, FL - Trusted Seller
TIN KNOCKER TK5
- Manufacturer: Tin Knocker
TIN KNOCKER Liner Table has a max roll width of 5 feet.The Tin Knocker manual insulation cutter slits fiberglass insulation to length and width.Once the material is at the desired length the operator pulls the ha...
$3,905 USDPort Orange, FL - Trusted Seller
TIN KNOCKER TK 816
- Manufacturer: Tin Knocker
- Model: TK816
TIN KNOCKER TK 816 Manual Leaf Brake has a bending length of 8 feet and capacity of 16 gauge. These are industrial quality brakes, the kind you use over a lifetime. Our straight brakes set the standard for qualit...
- Trusted Seller
TIN KNOCKER TK 2450
- Manufacturer: Tin Knocker
- Model: TK2450
TIN KNOCKER TK2450 Manual Slip Roll has a forming length of 50 inches and 24 gauge capacity.The Tin Knocker 50 inch Slip Roll is industrial strength. Precision machined and ground from high carbon steel, these ro...
$2,045 USDPort Orange, FL - Trusted Seller
TIN KNOCKER TK1
- Manufacturer: Tin Knocker
- Model: TK1
TIN KNOCKER TK1 throatless Hand Shear has a mild steel max capacity of 14 gauge.With these shears virtually any desired cut can be made with most metals. Designed to be bench mounted. Unique shoulder design that...
$575 USDPort Orange, FL - Trusted Seller
TIN KNOCKER TK36
- Manufacturer: Tin Knocker
- Model: TK36
The Tin Knocker No 36 Button Punch Cheek Bender is perfect for fabricating fittings. One side makes a right-angle flange with button punch while the other side makes 2 different size right angle flanges.Self-co...
- Trusted Seller
TIN KNOCKER TK2
- Manufacturer: Tin Knocker
- Model: TK2
TIN KNOCKER TK2 throatless Hand Shear has a mild steel max capacity of 10 gauge.With these shears virtually any desired cut can be made with most metals. Designed to be bench mounted.Unique shoulder design that ...
$675 USDPort Orange, FL 
Tin Knocker TK18 Punch Machine
- Manufacturer: Tin Knocker
- Model: TK18
Good condition Tin Knocker TK18 Punch Machines. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword