NEW TIN KNOCKER TK WIZARD 5 X 10 PLASMA TABLE
- Manufacturer: Tin Knocker
TK Wizard Cutting Table Features & Specifications: Heavy duty 5’x10', all welded steel construction capable of a 2000 lb load (full sheet of 1"plate)2 1/2" x 60", 16 ga. slats for economical replacement Efficient...
Ennis, TXNEW TIN KNOCKER FOURPLEX
- Manufacturer: Tin Knocker
NEW TIN KNOCKER FOURPLEX S & DRIVE MALE AND FEMALE SNAPLOCK ON THE OUTBOARDS
NEW TIN KNOCKER 24 GA PITTSBURG MACHINE
- Manufacturer: Tin Knocker
NEW TIN KNOCKER 24 GA PITTSBURG MACHINE
$3,150 USDEnnis, TX
NEW TIN KNOCKER TK JACKETING SHEAR
- Manufacturer: Tin Knocker
TK Jacketing Shear Specifications: Maximum Sheet Width: 48"Table top height or working surface height: 34"
$4,450 USDEnnis, TX
NEW TIN KNOCKER TK 24 GA PITTS PITTSBURGH ROLL FORMING MACHINE WITH STAND AND OPTIONAL FLANGER
- Manufacturer: Tin Knocker
- Model: TK24GA
TK 24 Ga Pittsburgh Specifications: Electrics: 115 Volt, Single Phase, 60 Hz - Standard (230V/1/50 available)Depth of Pocket: Approx. 5/16" with hammer edge of 3/8"Speed: Approx. 35 FPM Flange Height: 3/16"Dimens...
Ennis, TX
NEW TIN KNOCKER MODEL TK 1524 FOOT OPERATED (WATER COOLED) SPOTWELDER
- Manufacturer: Tin Knocker
- Model: TK1524
Features: Foot operated water cooled (prep)swivel arms swivel foot pedal universal reversible double end arms, 90 & 22 degrees vertically adjustable lower arms6 point heat selector1" quick release tip holders w/ ...
Ennis, TX
NEW TIN KNOCKER 36IN 18 GA PNEUMATIC CLEAT BENDER TK3618
- Manufacturer: Tin Knocker
- Model: TK36
NEW TIN KNOCKER 36IN 18 GA PNEUMATIC CLEAT BENDER TK3618 The Tin Knocker 3618 Power Cleat Bender is a heavy-duty, air-powered machine, designed for high-volume and high-speed production. Built for accuracy, repea...
Ennis, TX
NEW TIN KNOCKER GANG SLITTER
- Manufacturer: SLITTERS
Life lubed bearings 3” cold rolled polish shafts 2 sets of reversible knives Heavy duty chain drive Stripper fingers to prevent twist ¾ HP, 110/220V, 1 Phase Motor Tool steel blades with stripper rings
NEW TIN KNOCKER CDW-72 WELDING MACHINE, 20 PINS PER MINUTE (1PH-100V)
- Manufacturer: Tin Knocker
- Model: CDW72
The welding machine (CDW-72) allows the fixing of insulation material on sheet metal such as airducts in a single operation. The CDW-72 ensures a high quality of weld on sheet metal up to a thickness of several c...
Ennis, TXNEW TIN KNOCKER 1016 HAND BRAKE
- Manufacturer: Tin Knocker
Weight: 3000 lbs Dimensions: 160 x 50 x 60 in Capacity: 16 ga Bend length: 10’1″ Beam lift: 2 1/4″ Bolt on apron angle: incl Counter weight: incl Depth of box or pan: 2″ 3 sides
NEW TIN KNOCKER TK 20 GA PITTS PITTSBURGH ROLL FORMING MACHINE (WITH CHOICE OF DRIVE CLEAT OR ACME ROLLS)
- Manufacturer: Tin Knocker
- Model: TK20GA
TK 20 Ga Pittsburgh Specifications: Dimensions: 40"L x 24"W x 44"HCapacity: 20-26 Gauge Mild Steel Motor: 1 HP, 1800 RPM Electrics: 115/230 Volt Depth of Pocket: 5/16"Speed: Approx. 25 FPM
Ennis, TX
NEW TIN KNOCKER HM MB 1300L, 20GA X 50" STRAIGHT BRAKE (ANGLED NOSE BAR)
- Manufacturer: Tin Knocker
New hm mb 1300l, 20ga x 50″ straight brake (angled nose bar) The model mb 1300l is easy to operate. Light weight but strong. These manual machines are particularly suited for folding thin sheet metal. The mb 1300...
Ennis, TX
NEW TIN KNOCKER HM MB 1300S 20GA X 50 FINGER BRAKE (CLAW FOOT FINGERS)
- Manufacturer: Tin Knocker
GMC Deluxe Hydraulic Shear:
Ennis, TX- Ennis, TX
NEW TIN KNOCKER 1648 BOX AND PAN BRAKE WITH FLOOR STAND
- Manufacturer: Tin Knocker
Tin knocker 1648 box and pan brake with floor stand Specifications: Weight: 493 lbs Dimensions: 64 x 28 x 32 in Capacity: 16 ga Bend length: 48″ Max beam lift: 1. 25″ Max box depth: 1″ Finger width: 2,3,4
$2,250 USDEnnis, TX
Tin Knocker TK816 Press Brake
- Manufacturer: Tin Knocker
- Model: TK816
Good condition Tin Knocker TK816 Press Brakes. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword
