- Trusted Seller
2019 Advantage MDG-5A-PC
used
- Manufacturer: Advantage
Unit Cooling Capacity Compressor Condenser Refrigerant Process Pump Reservoir Process Connections Full Load Amperage(4) Dimensions Weight(5)
- Trusted Seller
Piannacle Stainless SRS Solvent Recovery System
used
- Manufacturer: Piannacle Stainless
Turnkey Features: Chilling (Inline Chilling Skid) Extraction (Alcohol Extraction Skid) Filtration (Heated Filtration Skid) Drying Solvent Recovery (100L SRS Solvent Recovery Skid) Performance: Processes up to 2,0...
- Trusted Seller
2021 Across International D35
used
- Manufacturer: Across International
– Two SECOP parallel compressors – Lockable door, high/low-temperature alarms, power failure alarm, door open alarm, filter clogging alarm – Password protection – Stainless steel interior for clean operation, dur...
- Trusted Seller
2013 Ingersoll Rand FA5I-24MK1P1-CE
used
- Manufacturer: Ingersoll Rand
Machine type: Process Equipment | Machine location: Texas | Stock #: 533539 | -capacity: 11,000 lbs | -speed: 16 m/min | -rope diameter: 20mm | -length: 610′
- Trusted Seller
2021 Across International D35
used
- Manufacturer: Across International
– Two SECOP parallel compressors – Lockable door, high/low-temperature alarms, power failure alarm, door open alarm, filter clogging alarm – Password protection – Stainless steel interior for clean operation, dur...
- Trusted Seller
2014 Kathabar 600KBD
used
- Manufacturer: Kathabar
Equipment Overview The Kathabar 600KBD is a high-performance liquid desiccant dehumidification system designed to control humidity within ±1% RH. It features a fiberglass (FRP) enclosure and utilizes a Kathene-ba...
- Trusted Seller
2014 Eastman Machine Company Eagle S125
used
- Manufacturer: Eagle
- Model: S125
Equipment Overview The Eastman Eagle S125 is a large-format, automated conveyor cutting system designed for high-volume textile, composite, and technical material applications. This 2014 unit features a 12’ x 36’...
- Trusted Seller
2019 Apexs 2000-5LX20LD
used
- Manufacturer: Apexs
Extraction Vessel • Volume – 40L vessel holds around 20 pounds of dry, ground material • Pressure – maximum pressure = 2000 psi (137 bar) • Temperature – max 160F (71C) • Materials – 304 stainless steel. Vessel i...
- Trusted Seller
2020 AMT PostPro
used
- Manufacturer: AMT
The PostPro3D® machine offers a controllable surface finish which brings surface roughness (Ra values) of 3D printed polymer parts down to 0.3 μm without the loss of detail and definition. In addition, the smooth...
- Trusted Seller
M.J, Maillis WCA-Smart
used
- Manufacturer: Maillis
Machine type: Process Equipment | Machine location: Texas | Stock #: 657125 | -load capacity: 8,000 lbs | -turntable dimensions: 25″ Ring Gear | -electrical requirements: 460V, 3P, 60Hz
- Trusted Seller
2024 Dalmec MGC
used
- Manufacturer: Dalmec
900lb Capacity Machine type: Process Equipment | Machine location: Upon Request | Stock #: 661480 | Max working radius: 4000 mm | Max vertical lifting speed: 0,5 meters/second | Vertical lift: 2450 mm
- Trusted Seller
2024 Dalmec PEC
used
- Manufacturer: Dalmec
- Model: PEC
400 lb Capacity Machine type: Process Equipment | Machine location: Upon Request | Stock #: 661274 | Max working radius: 4000 mm | Max vertical lifting speed: 0,5 meters/second | Vertical lift: 2450 mm
- Trusted Seller
2024 Dalmec MGC
used
- Manufacturer: Dalmec
900lb Capacity Machine type: Process Equipment | Machine location: Upon Request | Stock #: 661462 | Max working radius: 4000 mm | Max vertical lifting speed: 0,5 meters/second | Vertical lift: 2450 mm
- Trusted Seller
2024 Dalmec MGC
used
- Manufacturer: Dalmec
900lb Capacity Machine type: Process Equipment | Machine location: Upon Request | Stock #: 661440 | Max working radius: 4000 mm | Max vertical lifting speed: 0,5 meters/second | Vertical lift: 2450 mm
- Trusted Seller
2024 Dalmec PEC
used
- Manufacturer: Dalmec
- Model: PEC
400lb Capacity Machine type: Process Equipment | Machine location: Upon Request | Stock #: 414619 | Max working radius: 4000 mm | Max vertical lifting speed: 0,5 meters/second | Vertical lift: 2450 mm
Van Dorn Demag 300RS30F Injection Molding
used
- Manufacturer: Van Dorn Demag
- Model: 300RS30F
Good condition Van Dorn Demag 300RS30F Injection Moldings manufactured in 1991. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword
