Air Recuperator Counter Flow Cross Flow
new
Features 1. Normal operating temperature is not higher than 100°C(aluminum plate), and in resistance of special sealing materials, it can reach 200°C, and even 350°C with stainless steel design; 2. Easy maintenan...
Guangzhou, China
PHE Plate M6, M10
new
Product Introduction The PHE plates are etched and shaped at one time, and on the same plate, the depth of the flow channels is the same, and the spacing between the flow channels can be adjusted to direct the fl...
Guangzhou, China
PHE Gaskets
new
PHE Gaskets Product introduction Plate heat exchanger gasket is a necessary component of a complete GPHE. It's a simple and economical fitting. Commonly, there're three types of gaskets: clip-on, lock in and glue...
Guangzhou, China
Plate And Shell Compressed Air Cooler
new
Plate and Shell Compressed Air Cooler The plate and shell heat exchanger consists of two parts: the pressure vessel shell and the heat transfer plate bundle, which are welded together in parallel and installed lo...
Guangzhou, China
Bphe Evaporators
new
BPHE evaporator Just as all the contact points of the detachable points must be closely fitted, all the contact points of the brazed heat exchanger must be completely welded together, so as to ensure that themach...
Guangzhou, China
U Tube Bundle
new
U Tube Bundle Product Introduction U-tube bundle is an important part of the U-tube heat exchanger, that is, each tube is bent into a U-shape, the import and export are installed on both sides of the same tube pl...
Guangzhou, China
Tube And Tube Condenser
new
Tube And Tube Condenser Product Introduction Condensers can be divided into three categories according to their cooling media: water-cooled, air-cooled and evaporative. The common condenser is water-cooled one, w...
Guangzhou, China
S&T HeatExchanger For TCU
new
The Principle of TCU If the medium in the reactor needs to be heated, cold heat-conducting oil is heated through the steam heater and then enters the jacket of the reactor to provide heat. It is circulated and he...
Guangzhou, China
Compressed Air Cooler For Central Cooling And Ventilation
new
Conventional condensation for oil, gas, and many others uses either air or water. And yet air cooling makes its way into various applications due to following reasons, 1) Save water and reduce water pollution; 2)...
Guangzhou, China
Gasket Molding
new
A gasket is built into the grooves around the plate heat exchanger gasket and the groove around the corner hole, and the top is in contact with the corresponding position of another adjacent plate. When the seal ...
Guangzhou, China
High Pressure Tanks
new
Product Introduction With the development of manufacturing technology,volumn heat exchanger is gradually updated and designed with current requirement. It not only has a large heat transfer area per unit volume, ...
Guangzhou, China
High Pressure Reactor Vessel
new
Product Introduction Volumetric heat exchanger is a heat exchanger that uses cold and hot fluids to flow alternately through the surface of the heat storage body (filler) in the regenerator, so as to exchange hea...
Guangzhou, China
Oil Storage Tank
new
Product Introduction Volume heat exchanger is a separate equipment, such as heater, cooler and condenser, etc.; It can also be part of a process equipment, such as the heat exchanger in an ammonia synthesis towe...
Guangzhou, China
Pressure Tank Fabricators
new
Product Introduction The volumetric heat exchanger, the basic structure is a tank, the middle transverse plus a U-shaped tube heat exchanger. The tank body only serves to harmonize the water temperature. The fun...
Guangzhou, China
Desiccant Wheels
new
High moisture removal capacity Water washable Non-flammable Customer made size Flexible construction
Guangzhou, China
Tip: Enter manufacturer, model or keyword