Used Processing in Hiroshima, Japan

Nishikaki pump UFS
- used
- Manufacturer: Nishikaki pump
Discharge rate: 0.05 m3 / min Power: 2.2kw | Material: Wetted SUS 304 | Quantity saved: One
Hiroshima, Japan
1991 Sanwa MFD
- used
- Manufacturer: Sanwa
SUS 1.5 kw suction / discharge: caliber 25/20 mm Discharge amount: 1 m 3 / h, head height: 15 m
Hiroshima, Japan
[New Stock] Made in Korea 1200Ø IDTS1200-1 to 3
- used
Available in two-, three-, or four-section configurations. All options are possible. [In Stock] Cassette Type Material of Powder Contact Parts: SUS304, Frame Material: SS400 Frame Diameter: 1200, Motor: 1.5kW Tap...
Hiroshima, Japan
Asada Ironworks AF-70
- used
- Manufacturer: Asada Ironworks
Filter case: SUS 304 Filter blade: SUS 430 Remove iron powder and coproduct powder in the liquid with a magnetized filter
Hiroshima, Japan
2003 LX-025A-TNHJR-6, Hisaka Mfg.
- used
- Manufacturer: Hisaka
Heat transfer area: 0.5 m2. Maximum operating temperature: 144°C on A side and B side. Confidential test has been conducted. Click here to see a video of the test run (YouTube) upon completion of the maintenance.
Hiroshima, Japan
1985 [Hisaka Manufacturing] Spiral condenser No model
- used
- Manufacturer: Hisaka
Vortex type, design temperature: 50°C Heat transfer area 8㎡ Plate material: SUS317L
Hiroshima, Japan
［Carbon multi-tube heat exchanger (vertical type)
- used
Heat transfer area: 4.9 m2 Tube: inner diameter 25 mm, length 2000 mm Number of tubes: 31 1-pass specification Heat transfer area: 4.9 m2
Hiroshima, Japan
Seiko Kakoki TB2-100-RR2
- used
- Manufacturer: Seiko Kakoko
Air volume: 5.5 m3/min. Static pressure: 1.96KPa. Power: 1.5Kw200V
Hiroshima, Japan
Eyakikai 5 PSF
- used
- Manufacturer: Aiyaki Kai
Air volume 80 m3 / min Static pressure 3.5 Kpa Rotation speed 1750rpm
Hiroshima, Japan
1990 NPK HITB - 13 E 190
- used
- Manufacturer: NPK
15kw, 13m3/min Airflow: 13m3/min Static pressure: -1900mmAq
Hiroshima, Japan
Ebara MO 3 SRM II
- used
- Manufacturer: Ebara
2.2kw, SS, 162m3/min Airflow: 162m3/min Static pressure: 20mmAq
Hiroshima, Japan
2008 Rinkai Cylindrical vertical pressure sealed type
- used
- Manufacturer: Linkai
Water inflow: 15 m3/h Line velocity: 11.3 m/h Full water capacity: 3.94 m3 Available data
Hiroshima, Japan
［Toshiba] Motor 0.75kw6p200V
- used
- Manufacturer: Toshiba
Unused item Power: 0.75kw6p200V | Quantity saved: 3 units
Hiroshima, Japan
［Sumitomo] Motor with cyclo reduction gear No model
- used
- Manufacturer: Sumitomo
Reduction ratio 1/87
Hiroshima, Japan
［Sumitomo] Motor with Bayer cyclo reduction gear No model
- used
- Manufacturer: Sumitomo
Power: 2.2Kw | Material: SS | Quantity saved: 1
Hiroshima, Japan