• Tos Type ISO-16 27052

    • Manufacturer: TOS Varnsdorf
    • Capacity: 39,600 Lbs
    • Weight: 39,600 Lbs

    serial no. 01-07 pendant controls power infeed & rotation hydraulic clamping steel sliding way covers

    No price
    Melville, NY, USA
  • 4", TOS W100A, COMPLETLEY REMANUFACTURED , 1 YEAR WARRANTY, LOADED WITH FEATURES

    • Manufacturer: TOS Varnsdorf

      model: w100a completley remanufactured 1 year warranty ce certificate specifications: diameter of working spindle................. 100mm 3.94" x-axis travel............................... 1600mm 63" y-axis tra...

      No price
      Bedford, OH, USA
    • 1977 Tos SKJ-10A

      • Manufacturer: TOS Varnsdorf

        new fanuc alpha digital servo motors, new fanuc servo drives, new siemens spindle drive, new cabling, new magnetics

        No price
        Washington, PA, USA
      • 1980 Tos WHN11NC

        • Manufacturer: TOS Varnsdorf
        • Control: New Heidenhain TNC 320 Full Contouring 5 Axis CNC, Optional - Num or Fagor CNC

        power locks ways: hardened ways | power: 3 ph / 60hz / 440v existing | control: new heidenhain tnc 320 full contouring 5 axis cnc, optional - num or fagor cnc | warranty: manufacturers warranty on new control, se...

        No price
        Washington, PA, USA
      • Lathe, TOS LATHE MODEL # SN50

        • Manufacturer: TOS Varnsdorf

          tos lathe model sn50 serial #:  6321202 swing over bed:  20 1/2" swing over saddle:  13" swing over gap:  26" hole through spindle:  1 7/8" center distance:  84" spindle speeds (24):  22 to 2000 rpm spindle nose:...

          $9,850
          Woodruff, SC, USA
        • 1993 Tos Varnsdorf W100A

          • Manufacturer: TOS Varnsdorf
          • Spindle Diameter: 3.94"

          equipment: built in 49" x 49" rotary table built in facing head hardened ground ways operator's pendant control power draw bar | spindle motor: 15 hp | spindle taper: iso 50 | spindle speeds: 7.1 - 1,120 rpm | s...

          No price
          Dundee, FL, USA
        • 5",TOS,No. WHN 13.8P, FANUC 31i CNC CONTROL, COMPLETE RE-MANUFACTURED,WARRANTY

          • Manufacturer: TOS Varnsdorf

            remanufactured in 2015 specifications: x-axis.................................... 137.5" y-axis.................................... 78.5" z-axis.................................... 49" w-axis........................

            No price
            Bedford, OH, USA
          • 1995 Tos W100A 27888

            • Manufacturer: TOS Varnsdorf
            • Spindle Diameter: 3.93"

            pendant control newall 3-axis digital readouts 24" diameter built in facing head power draw bar hardened & ground bedways built in rotary table inspect in plant under power

            No price
            Melville, NY, USA
          • 1998 Tos SU150H 27992

            • Manufacturer: TOS Varnsdorf
            • Spindle Bore: 8.25"
            • Distance between Centers: 314.96"

            8.25" spindle bore inch & metric threading power compound 31.89" 4-jaw chuck w/ 8.25" spindle bore 2-axis sony digital readouts inch/metric threading power compound for taper turning power rapid traverse power ta...

            No price
            Melville, NY, USA
          • 1993 Tos SKQ-12NC 27787

            • Manufacturer: TOS Varnsdorf

              fanuc ot-c cnc control 12-position automatic toolchanger fanuc ot-c cnc control 12 position automatic tool toolchanger 49" 4-jaw power chuck elevating cross rail chip conveyor 50 hp table drive splash guards

              No price
              Melville, NY, USA