Used Engine Lathes in Vermont, USA

1965/84 Binns & Berry Sliding Gap Bed Lathe

• Manufacturer: Binns & Berry

Manual Engine Lathe -Equipped With- 4-Way Tool Post Operators Stand Steady Rest Rear Mounted Tracer & Template Bar Manual X-Y Axis Tool Block for Compound Boring Bar H...

Leblond 26 REGAL

• Manufacturer: Leblond
• Spindle bore: 55.63 mm

Manual Engine Lathe -EQUIPPED WITH- (1) 15" 6-Jaw Chuck (1) 24" 4-Jaw Chuck (1) 12.5" Face Plate Aloris Tool Post Accurite 200T 2 Axis DRO Tool Offsets Feature (1) Steady REst Extra Available Tool Holders All Ava...

Bertram 45x240

Engine Lathe **Raised Head & Tailstock** Swing: 45" | Centers: 240"

1989 South Bend 750

• Manufacturer: South Bend

Engine Lathe -EQUIPPED WITH- Inch/Metric Threading 40"(approx) Swing in Removable Gap(10" Gap Length) 15-1/2 3-Jaw Chuck

2007 Sunfirm SET 28120

• Spindle bore: 152.4 mm

Manual Engine Lathe Swing over bed: 28" | Swing over cross slide: 20" | Swing in gap: 40" | Distance between centers: 120" | Spindle bore: 6" | Spindle speed: 1,000 RPM | Inch & metric threading: Yes

1962 Harrison-Clearing 12X40

• Manufacturer: Harrison
• Spindle bore: 31.75 mm

Manual Engine Lathe Swing over ways: 12" | Swing in gap: 22" | Distance between centers: 40" | Spindle bore: 1.25" | Spindle speed: 2,000 RPM

Dimco PV45

• Spindle bore: 88.9 mm

Manual Engine Lathe Machine type: A-61 | Model number: 297-44 | Swing over bed: 36" | Swing in gap: 60" | Distance between centers: 96" | Spindle hole: 3.5" | Over all length of machine: 180"

Betts-Bridgeford 42X288

• Manufacturer: Betts Bridgeford

Manual Engine Lathe Swing over ways: 42" | Distance between centers: 288" | Jaw size: 28" (4-Jaw) | Spindle motor: 10 HP | Taper attachment: Yes | Threading: Yes

Tos SN 50 C

• Manufacturer: TOS

Manual Engine Lathe -Equipped With- Digital Read Out Tail Stock

Cincinnati HYDROSHIFT 19X54

• Manufacturer: Cincinnati
• Spindle bore: 44,450.0 mm

Manual Engine Lathe -EQUIPPED WITH- Taper Attachment Digital Read Out

1968 Binns & Berry TB 12.5

• Manufacturer: Binns & Berry
• Spindle bore: 101.6 mm

Manual Engine Lathe -EQUIPPED WITH- Taper Attachment Steady Rests For Video: CLICK HERE

1941 American 24X240

• Spindle bore: 50.8 mm

Manual Engine Lathe -EQUIPPED WITH- 4-Jaw Chuck Steady Rest

Summit 30 X 200

• Manufacturer: Summit

Manual Engine Lathe -EQUIPPED WITH- (2) Steady Rests Tail Stock Threading Taper Attachment Tool Post

2008 Ganesh GT-44160

• Manufacturer: Ganesh
• Spindle bore: 152.4 mm

Manual Engine Lathe -EQUIPPED WITH- 6” Spindle Bore Inch/Metric Threading 40” 4-Jaw Chuck Tailstock ***LESS THAN 200 HOURS OF USE***

1997 Acer DYNAMIC 1740G

• Manufacturer: Acer
• Model: Dynamic 1740G

Manual Engine Lathe -EQUIPPED WITH- 10" 3-Jaw Chuck Inch & Metric Threading Steady Rest 4-Way Tool Post Coolant System Full Length Splash Guard