• 1998 Hanwha (Tsugami) Hanex 25 Multi-Axis CNC Swiss Turning Center

    No price - Indian Trail, NC, USA
    • Manufacturer: Tsugami

    equipped with: fanuc ot-c control* lns hys 6.26 hs-4.8 gaitling type super hydro barfeed* fanuc control equipped with sub-spindle chuck button* royal filtermist mist collector* sub-spindle ejection...

  • 2015 Tsugami BO 326-II 5871

    No price - Maitland, FL, USA Recently Added
    • Manufacturer: Tsugami

    active: yes | chuck type: collet | bar capacity: 1.250 | spindle motor: 7.5 | spindle speed: 8,000 | product status: active | rapid traverse: 1259.84 | coolant type(s): high pressure coolant | con...

  • 2014 Tsugami B0125-II Swiss Turning Center

    No price - Barrington, IL, USA
    • Manufacturer: Tsugami

    equipped with: 12mm capacity swissturn designed for superior flexibility electronic integral motor guide bushing easy access tool zone sub side cross drilling chucker kit -- allows you to convert y...

  • 1998 Tsugami FMA5-II Fanuc 18iMA

    No price - Dundee, FL, USA
    • Manufacturer: Tsugami

    equipment: 11 pallet vertical loop magazine style 65 station toolchanger flood coolant high pressure coolant rs-232c port for dnc interface chip conveyor all available manuals (7) pallet bases (42...

  • Tsugami B038T (2014)

    No price - Altamonte Springs, FL, USA
    • Manufacturer: Tsugami

    maximum bar stock 38 mm (1.49”) # axes 9 sliding headstock / guide bushing yes convertible: run w/o guide bushing (chucker) no max length: with guide bushing 250 mm (9.84”) # tool positions (std / ...

  • Tsugami BS26CIII - 1.02" Bar, 7,000 RPM, 24 Tools, 2003 4987

    No price - Maitland, FL, USA Recently Added
    • Manufacturer: Tsugami

    bar capacity 1.02” second bar capacity 0.86” spindle speed 7,000 rpm spindle motor 7.37 hp sub-spindle speed 7,000 rpm sub-spindle motor 2.95 hp number of tools 24 main spindle indexing full c-axis...

  • 2014 Tsugami VA1-II

    No price - Chicago, IL, USA Recently Added
    • Manufacturer: Tsugami
    • Spindle Taper: BT 20
    • Control: Fanuc

    wired for 4th axis flood coolant fanuc 0imd cnc control 14 pos. double arm atc chip removal system internal light coolant tank

  • 2007 TSUGAMI BH-38Y

    $119,500 - Santa Ana, CA, USA
    • Manufacturer: Tsugami

    8 axis, 1-1/2" capacity, fanuc 31i-model a control, cross drill: 5,000 rpm, high speed cross drill, high speed face drill, work backward discharge, turmoil cooler, chiller unit, oil 4 port 1000 psi...

  • TSUGAMI B0326 II - 2013 USED CNC SWISS Lathe

    $199,900 - Sanford, FL, USA Recently Added
    • Manufacturer: Tsugami

    tsugami b0326 ii - used cnc swiss lathe spindle speed               8000 rpm cnc control                  fanuc maximum part size 32 mm/ 1.26" 6 axis y axis full c axis on both sides max length wit...

  • Tsugami BO326-II - 1.25" Bar, 10,000 RPM, 2015 4937

    No price - Maitland, FL, USA
    • Manufacturer: Tsugami

    bar capacity 1.25” chuck size s&m tf37 collet stoke in chucker mode max. swing over bed 2.75” distance between centers 12.59 max. turning length 12.6 spindle speed 8,000 rpm spindle motor 7.5 hp su...