1998 MORI SEIKI SV-400
- Manufacturer: Mori Seiki
- Model: SV-400
â—† MSC-501 (FANUC) â—† Spindle speed: 12,000rpm â—† Spindle taper: No.40 â—† MAS BT40 â—† ATC30 * 2 axes added (5 axes at the same time
Mie, Japan
1997 OKUMA & HOWA MILLAC-511V
- Manufacturer: Okuma
- Model: MILLAC
â—† OH-OSP-MC â—† BT40 â—† ATC24 *No rigid tap * Helical cutting (only arcs within 360 degrees are possible) * No chip conveyor
Mie, Japan
Nagase SGH-600
- Manufacturer: Nagase
Motor 2.2 kW + 1.5 kW + 40 W; 9.8 A + 6.3 A + 0.23 A Electricity 220 V 3 Phase 0.005 Per Up Down Division 0.05 Per Cross Division
Mie, Japan
1974 Kuroda GS-BM
- Manufacturer: Kuroda
- Model: GS-BM
◆ Tiltable permanent magnet chuck GSM-2 ・ 100 × 300 ◆ With dust collector ◆grindstone shaft speed 2800rpm
Mie, Japan
Mie, Japan
Mie, Japan
Mie, Japan
1985 Toyoda GUP32×50
- Manufacturer: Toyoda
- Model: GUP3250
â—† MT No.4 —† swing on the table: 320 | —† distance between centers: 500 | —† whetstone: Outer diameter φ355 x Width 50 x Inner diameter φ127 | —† spindle rotation speed: 16-500rpm | —† required floor are...
Mie, Japan
1973 Toyoda GUS-30-50
- Manufacturer: Toyoda
—†swing: 300 | —† center distance: 500 | —†maximum grinding diameter: 280 | —†wheel size: 355 x 50 width x 127 inside diameter | —†center: MT No.4 | —† spindle hole diameter: 27mm | —† spindle speed: 20 ~...
Mie, Japan
1971 Mizuguchi GU-650
- Manufacturer: Mizuguchi
â—† Rated voltage 200V —† no-load rotation speed: 1750min-1 | —† whetstone dimensions: outer diameter 355φ x width 75 x inner diameter 152.4φ
Mie, Japan
1998 OKK RRM-3V
- Manufacturer: OKK
- Model: RRM-3V
â—† MELDAS520AMR â—† 7.5kw × 4P —† xyz: 920 x 380 x 450 | —† table top surface to spindle end surface: 100 to 550 | —† table: 1650 x 380 | —† allowable mass of workpiece: 1000kg | —† work surface shape: 18 ...
Mie, Japan
1989 Makino AVNC-74
- Manufacturer: Makino
- Model: AVNC-74
â—† FANUC-15M â—† Table 1050 × 400 —† loading weight: 500kg | —† xyz: 710 × 400 × 360 | —† motor: 2.2kw | —† spindle rotation: 4000rpm | —† weight: 3.2t
Mie, Japan
Mie, Japan
Mie, Japan
NC Vertical Lathe
- Manufacturer: O-M
◆FANUC15-TF ◆10-jaw hydraulic chuck (3200φ) ◆Simultaneous 2 axes (X-Z) ◆Table diameter:3200mm ◆Maximum cutting diameter:4000mm ◆Maximum turning height:1400mm ◆Maximum loading mass:15000kg ◆Table rotation s...
Mie, Japan
Tip: Enter manufacturer, model or keyword