Used Fans & Ventilation in Australia

AXIAL VENTILATION FAN BLOWER 3KW - 1180 X 1180MM

• Manufacturer: AXIAL VENTILATION FAN BLOWER

This fan is in great working condition. Motor: 3kW 415V | Hood opening: 1180 x 1180mm | Outlet diameter: 250mm | Overall dimensions (mm): 1200 w x 1200 d x 2250 h

Speedlock INLINE DUCT BOOSTER AXIAL FAN

• Manufacturer: Speedlock

Industrial grade dual outlet axial inline booster in great condition. Suitable for ducting of short runs with minimal beds. Can be mounted in-between lengths of ducting. Compact design, perfect for tighter roof c...

ABB AF500 AXIAL FLOW FAN BLOWER

• Manufacturer: ABB

This fan is in great working condition. It has a stainless hood on one side. Made in Australia We have two of these fans available at the time of listing.

2009 Flaktwoods 1000MM GALVANISED STEEL AXIAL FAN

• Manufacturer: Flaktwoods

This fan is in great working condition. It is made out of galvanised steel and driven by a 30kW motor.

Air Fan

• Manufacturer: ABB

ABB Double inlet Fan. Model CLD 445. 15000cfm low pressure. Outlet size 600 x 850mm No motor fitted requires 5.5kw or bigger.

915MM DIAMETER AXIAL FAN BLOWER 5KW

• Manufacturer: 915MM DIAMETER AXIAL FAN BLOWER

This fan is in great working condition. Driven by an ASEA 5kW motor.

MONARCH 30KW LARGE CENTRIFUGAL BLOWER FAN IMPELLER AND MOTOR

• Manufacturer: Monarch

This blower is in great working condition. It is a loose unit that you can install in your own housing. Belt driven by a Monarch 30kW 3 Phase motor.

Morse 710MM DIAMETER STAINLESS STEEL ROOF AXIAL FAN BLOWER

• Manufacturer: Morse

This fan is well constructed but the motor is seized and needs replacing. It is made out of 304 stainless steel. MEASUREMENTS

MONARCH CENTRIFUGAL BLOWER FAN - 11KW

• Manufacturer: Monarch

This blower is in great working condition. We have three of these blowers available at the time of listing. It is a loose unit that you can install in your own housing. Driven by a Monarch 11kW 3 Phase motor.

TECO CENTRIFUGAL BLOWER FAN - 11KW

• Manufacturer: Teco - Westinghouse

This blower is in great working condition. It is a loose unit that you can install in your own housing. Driven by a Teco 11kW 3 Phase motor.

Draught Force A3614

• Manufacturer: Draught Force

This fan is in great working condition. Comes with a big ventilation box, which has an actuated-controlled vents and a sensor. Built in Australia. Mostly made out of galvanised steel.

AXIAL 920MM DIAMETER

• Manufacturer: Axial

This fan is in great working condition. Driven by a large motor.

Fan (FA064)

Mill type fan, stainless steel, 130 mm dia inlet, 120 mm x 180 mm outlet. 1hp, 4 pole Teco motor. Direct coupled.

Induction Bearing Heater

• Manufacturer: United Industries India

Induction Bearing Heater Maximum Outer Diameter 300mm 3 Yoke will give 1Year waranty,any spare will help Immediately Main thing is automatic temperature trip