Used Printing in Umbria, Italy

SBL-TS 1450W-1650W-2200W

• Manufacturer: SBL-Primatech

* Automatic sheet feeder * Straightener * Double pre-break * Active joggers * For linear gluing double wall automatic bottom 4/6 corners * Vinyl or hot melt gluing * Quality control systems * Code readers * Pneum...

SBL TS 1100W-1200W-1350W

• Manufacturer: SBL-Primatech

* Automatic sheet feeder * Rectifier * Double pre-break * Active joggers * For double wall linear gluing with automatic bottom 4/6 corners * Vinyl or hot melt gluing * Quality control systems * Code readers * Pne...

SBL TS 550W

• Manufacturer: SBL-Primatech

* Automatic sheet feeder * Rectifier * Double pre-break * Active joggers * For double wall linear gluing with automatic bottom 4/6 corners * Vinyl or hot melt gluing * Quality control systems * Code readers * Pne...

SBL TS 800W-1000W

• Manufacturer: SBL-Primatech

* Automatic sheet feeder * Straightener * Double pre-break * Active joggers * For linear gluing double wall automatic bottom 4/6 corners * Vinyl or hot melt gluing * Quality control systems * Code readers * Pneum...

Errepi RAPHAEL

• Manufacturer: Errepi

RAFFAELLO is an extremely versatile machine because of its ability to be used to work downstream or upstream of any printing press, or independently (off-line) if set up with an unwinder and rewinder. It is a mac...

Errepi R-GALILEO

• Manufacturer: Errepi

The R-GALILEO version comes with servo-drive motors for each unit, allowing for printing and die-cutting repasses. This machine allows any material to be processed, from self-adhesive (and non-adhesive) paper to ...

Errepi R-DANTE

• Manufacturer: Dante

380450 Paper passage 380 mm450 mm Printable 380 mm450 mm Min/max print development 7,5"/24"7,5"/24" Die cuttable 370 mm430 mm Min/max die-cut development 7,5"/24"7,5"/24" Unwind coil diameter 800 mm800 mm

Errepi DANTE WITH FUSTELLA

• Manufacturer: Dante

380450 Paper passage 380 mm450 mm Stampabille 380 mm450 mm Min/max print development 7,5" / 24"7,5" / 24" Die cuttable 370 mm430 mm Min/max die-cut development 7,5" / 24"7,5" / 24" Unwind roll diameter 800 mm800 mm

Errepi R-GALILEO

• Manufacturer: Errepi

The R-GALILEO version comes with servo-drive motors for each unit, allowing for printing and die-cutting repasses. This machine allows any material to be processed, from self-adhesive (and non-adhesive) paper to ...

Errepi Archimedes

• Manufacturer: ERREPI S.r.l.

140016001800 Max. unwinding diameter 2000mm2000mm2000mm Max. diameter in rewinding 350mm350mm350mm Max. product passage width in unwinding 1250mm1600mm1700mm Min. product passage width in rewinding 300mm300mm300m...

Errepi VITTORINO

• Manufacturer: ERREPI S.r.l.

1600mm2000mm Max tube length 1600mm2000mm Max cutting length 170mm170mm Tube inner diameter 25 mm - 76mm25 mm - 76 mm Speed - pieces per min. 1515 Optional: automatic tube unloading in the cutting process from sp...

Errepi VOLTA

• Manufacturer: Volta

200350 Paper passage 200 mm350 mm Uncoiler coil diameter 400 mm400 mm Max rewind diameter 400 mm400 mm Winding exp. shaft diameter 25.4 mm - 76 mm25.4 mm - 76 mm Internal/external rewinding standardstandard Speed...

Errepi DANTE WITHOUT FUSTELLA

• Manufacturer: Dante

380 450 Paper passage 380 mm 450 mm Unwind reel diameter 800 mm 800 mm Maximum rewind diameter 400 mm (optional 600 mm) 400 mm (optional 600 mm) Explosion shaft diameter in winding 25.4 mm - 152 mm 25.4 - 152 mm ...

2000 BOBST SP 142 CER II

• Manufacturer: Bobst - Rotomec
• Model: SP 142
• Power requirement: 30 kW

BOBST SP 142 CER II DIE CUTTING MACHINE - YEAR 2000 - WITH ONLY 27,000 WORKING HOURS BOBST SP 142 CER II - YEAR 2000 - DIE CUTTING MACHINE - ONLY 27,000 WORKING HOURS !!!!

Pre-press and moulding table for cheeses - ETA ITALY

Stainless steel table, inclined bottom to the center for whey collecting. Inside, a perforated plastic food conveyor belt is installed and it’s moved by a geared motor unit for feeding to permit whey drainage. Th...