Used Processing in Texas, USA

COLUMNS 90911
- used
- Manufacturer: Wyatt
MFG. BY WYATT; Psi: 30 | Qty: 1 | Alloy: S | Material: 316SS | Packed y/n: N | Temp deg. f: 450 | No. of trays: 38 | Full vacuum y/n: Y | Length (ft'in"): 46'9" | Previous service: CRUDE ACETONE COLUMN | Dia/widt...
Cleveland, TX
COLUMNS 90141
- used
- Manufacturer: Wyatt
HCN STRIPPER COLUMN; MFG. BY WYATT; (2) BOLTED SECTIONS;
Cleveland, TX
Trusted Seller
Spare Lance Assembly
- new
- Manufacturer: Specialty Equipment
All standard filling lances are made with 316 stainless steel tubing. Each one has a machined spool that is glass-filled and Teflon seated and sealed, attached to a push rod. An air cylinder raises and lowers the...
Houston, TX
2 PHASE SEPARATOR
- used
Capacity (gals): 595 | Diameter (in): 30 | Length (ft-in): 10-0 | Pressure (psi): 1440 | Temperature (deg f): 125 | Orientation: H | Material: CS
Houston, TX
ALDRICH TRIPLEX
- used
- Manufacturer: Aldrich
PUMP W/SPARE BODY, VERTICAL PISTONS. BELT DRIVEN, NO MOTOR. MAXIMUM CONTINUOUS RATING 1200 PSIG, ALDRICH PUMP #'S 16442 & 16445.
Houston, TX
Ronningen-Petter 4 BANK
- used
- Manufacturer: Ronningen-Petter
USED RONNINGEN-PETTER CYLINDER FILTER SIZE: 4 BANK MATERIAL: SS DELTA GAURD AUTO FILTER
Cypress, TX
Kamyr Outlet Devise
- used
- Manufacturer: Kamyr
Kamyr Out Let Devise, Psi 351@350°; SerialNumber 409-R83; Size 5
Cypress, TX
Andritz Chip Meter
- used
- Manufacturer: Andritz
Rebuilt Andritz #4 Chip Meter Size: #4
Cypress, TX
Black Clawson MINI M-25
- used
- Manufacturer: Black Clawson
USED BLACK CLAWSON MODEL: MINI M-25 WITH MECHANICAL SEAL WITH 2-FOIL ROTOR ASSEMBLY WITH SLOTTED BASKET, ON BASE WITH SIEMENS 20 HP, 1200 RPM, 575 VOLT MOTOR MATERIAL: ALL 316 STAINLESS STEEL
Cypress, TX
Trusted Seller
STAINLESS STEEL INDUSTRIAL PROCESSING CONTAINER M5903
- used
Warranty Information THIS IS A USED ITEM, IN GOOD CONDITION AND INCLUDES A 30 DAY WARRANTY. Unit in good condition
$350 USD
El Paso, TX
Nord 1.5-Hp 3Ph Stainless Steel Food Grade Auger-Mixer Bottom-Discharge 230/460V
- used
- Manufacturer: Nord
Home Contact About Technology Industrial Lab & Test Electrical Semiconductor Nord 1.5-Hp 3Ph Stainless Steel Food Grade Auger-Mixer Bottom-Discharge 230/460V Manufacturer: Nord Model: Does Not Apply Condition: Us...
$1,500 USD
Leander, TX
ALDRICH TRIPLEX
- used
- Manufacturer: Aldrich
PUMP S/N 20893, LUFKIN GEAR REDUCER 11.6/1 RATIO AND AMERICAN STANDARD GYROL FLUID DRIVE. LIMITED INFORMATION ON FILE. PUMP RATED FOR 10,000 PSI
Houston, TX
Trusted Seller
Matsui Drying Hopper HDII-100, Ohikaze Blower, Mitsubishi Breaker Plastic Molding Machines
- used
- Manufacturer: Matsui
Matsui Drying Hopper HDII-75R, Ohikaze Blower, Mitsubishi Breaker does NOT come on a stand 208Volts, AC, 3PH 60Hz Full Load 15.4A Additional Elements of the System: Mitsubishi No-Fuse Breaker NF30-KC 3 Pole, 50...
$3,400 USD
Chico, TX
Trusted Seller
Matsui Drying Hopper HDII-75, Ohikaze Blower, Duracool Powered on Alum Stand Plastic Molding Machines
- used
- Manufacturer: Matsui
Matsui Drying Hopper HDII-75, Ohikaze Blower, Duracool Powered on Aluminum Stand 208Volts, AC, 3PH 60Hz Full Load 15.4A Additional Elements of the System: Duracool 3M30APS120ACWG 30Amp, 480V, 1.5HP, 3PH Onikaze...
$3,300 USD
Chico, TX
Trusted Seller
VERSAMATIC MACP300-10A Plastic Molding Machines
- used
- Manufacturer: VERSAMATIC
“Used - good Condition” VERSAMATIC Double Diaphragm Pump E2AA6X660
$979 USD
Chico, TX
Ingersoll Rand UP6-10-125 Industrial Compressor
- used
- Manufacturer: Ingersoll Rand
- Model: UP6-10-125
Good condition Ingersoll Rand UP6-10-125 Industrial Compressors. Located in USA and other countries. Click request price for more information.
USA