- Trusted Seller
1996 ASAHI OKUMA AT-635
used
- Manufacturer: Okuma
- Model: AT-635
2 DIE 2 BLOW COLD HEADER * BUSHING CUT-OFF * OSG MONITOR * TIMED POSITIVE KNOCKOUT IN 1ST AND 2ND * WIRE STRAIGHTENER * SOUND ENCLOSURE * LOTS of TOOLING
Vaughan, Canada - Trusted Seller
AJAX 1" UPSETTER
used
- Manufacturer: Ajax
1" UPSETTER * Air clutch * Air brake **Rebuilt by Ajax in 1979 Including: New Brake, Elec. Controls, Flywheel Brake, Clutch was redesigned (anti-friction bearing replaced old bronze bushing type, Trabon lubricati...
Vaughan, Canada - Trusted Seller
NATIONAL 2-1/2"
used
- Manufacturer: National
National Hi-Duty 2-1/2" Heavy Duty Upsetter with Air Clutch & Brake Max. Bar Diameter: 2.5: Upsetting Power: 500 tons Stroke Per Minute: 55 Stroke: 9.5" Grip Opening: 4” Grip Tons: 250 tons Gather: 6.8” Hold: 1....
Vaughan, Canada - Trusted Seller
1993 NAKASHIMADA NP-40
used
- Manufacturer: Nakashimada
2 DIE 3 BLOW COLD HEADER Cutoff Diameter Range: 2.5mm - 4mm Max Cutoff Length: 25mm Max. Shank Length: 30mm Max. Transferable Length: 35mm Die Kickout (1st): 50mm Die Kickout (2nd): 30mm Max. PKO Stroke: 15mm O...
Vaughan, Canada - Trusted Seller
HASENCLEVER AWF 400/800/800 W/Automatic Manipulator
used
- Manufacturer: Hasenclever
AUTOMATIC FORGING ROLL Max Dia of Workpiece: 150mm Diameter of Rolling Segment: 800mm Usable width of middle roll: 800mm Usable width of outer roll: 355mm Roll revolutions (1/min RPM): 30 min~1 Roll Adjustment: 2...
Vaughan, Canada - Trusted Seller
1977 NAKASHIMADA H-20AU
used
- Manufacturer: Nakashimada
DSSD COLD HEADER Maximum Wire Diameter: 6.0mm (.237") Maximum Cut-Off Length: 70mm (2.755") Max Shank Length: 55mm (1.968") Production Speed: 180-200ppm Main motor: 7.5hp Net Weight,approx: 7,500 lbs
Vaughan, Canada - Trusted Seller
Hyodong HSBF-408 // HSBF-406 // HSBF-306
new
- Manufacturer: Hyodong
Three & Four Die Bolt Former [ New Compact Design ] Bolt Size: M6 [1/4"] (10AF) Bolt Size: M8 [5/16"] (14AF) No of dies: 3-4 Dies Forging Load: 300kN // 500kN Output speed: up to 400/300ppm * New Simple & Compact...
Vaughan, Canada - Trusted Seller
National
used
- Manufacturer: National
DOUBLE STROKE SOLID DIE COLD HEADER Capacity: 3/16X1" | Cutoff diameter: 3/16" | Shank length: 1" | Cutoff length: 1-3/4" | Speed: 225 Pieces per Minute | Weight,approx: 4,100 Lbs.
Vaughan, Canada - Trusted Seller
AJAX #0
used
- Manufacturer: Ajax
FORGING ROLL Diameter of Roll: 12-1/2" Standard width roll: 14" Floor space, approx.: 5'8"L-R x 4'2"F-B Weight, approx.: 8,500 lbs
Vaughan, Canada - Trusted Seller
NATIONAL 164
used
- Manufacturer: National
4 DIE HIGH SPEED COLD NUT FORMER Capacity: 5/8" | Number of dies: 4 | Nut size: 5/8" (16MM) | Maximum nut height: 11/16" (17.5MM) | Max. across flats, hex: 15/16" (24MM) | Production speed: 200PPM | Weight (appro...
Vaughan, Canada - Trusted Seller
EUMUCO RW1
used
- Manufacturer: SMS Eumuco
- Model: RW1
FORGING ROLL Max Dia of Workpiece: 55mm Diameter of Rolling Segment: 370mm Usable width of middle roll: 500mm Usable width of outer roll: 160mm Max length of working piece-middle: 570mm Max length of working piec...
Vaughan, Canada - Trusted Seller
AJAX 4" UPSETTER
used
- Manufacturer: Ajax
4" UPSETTER Capacity: 4" | Upsetting power: 800t | Usable upsetting stroke: 13-1/2" | Strokes min: 35 | Die opening: 6" | Stock gather: 9" | Hold on: 4" | Die height: 26" | Die thickness: 8" | Motor: 40hp | Appro...
Vaughan, Canada 
2016 PARKER NETSUSHORI KOGYO CO.,LTD M-23037
used
- Manufacturer: Parker
Specification Cap.：100~150kg/hr Heating oven：830～870℃ Salt tank：250～380℃ Washing：room temp. Dryer：room～200℃ Atmosphere：CH3OH+N2+EnrichedOther Manual：Japanese＆English Gate dim.：600ｘ3800X50 Specification Cap.：100~150...
Barrie, Canada- Trusted Seller
2010 Chun Zu CBP-206L
used
- Manufacturer: Chun Zu
6 DIE BOLT PARTS FORMER No. of Forging Station: 6 Forging Load: 390,000 Kfg. Cutoff Diameter: 30mm Cutoff Length: 240mm PKO Stroke: 60mm (option) KO Stroke: 220mm Punch Dia. x L: 90 x 215L (mm) Cutoff Die ...
Vaughan, Canada - Trusted Seller
2013 BIING FENG BF-C-PF19-B6S
used
- Manufacturer: BIING FENG
3/4" 7 DIE COLD PART FORMER Capacity: 3/4" | Forging stations: 7 | Max. cut-off dia: 19mm | Max cut-off length: 20mm | Max. kick out length: 25mm | Centre distance between dies: 80mm | Punch kickout length: 20mm ...
Vaughan, Canada
Tip: Enter manufacturer, model or keyword
