Used Machine Tools in Aichi, Japan

1997 Shigiya Seiki GP-30B･40A

• Manufacturer: Seiki

Table swing: φ300mm, Center distance: 400mm, Maximum machining diameter: φ220mm, Maximum machining weight: 130kg, Spindle speed: 28-303rpm (50Hz), 33-363rpm (60Hz), Grinding wheel dimensions: (Outer diameter) φ32...

2003 Mori Seiki NH5000/40

• Manufacturer: Mori Seiki
• Model: NH-5000/40

MSG-501 (FANUC), BT40, ATC 40, 2APC-□500, Table indexing: 0.001 degrees, Spindle speed: 14000 rpm, S: (X)630*(Y)600*(Z)670 mm, *If there are any discrepancies between the product description and the actual produc...

2009 Okuma MU-400VA

• Manufacturer: Okuma
• Model: MU-400VA

OKUMA OSP-P200M-H, S:(X)762*(Y)460*(Z)460mm, T:φ400mm, 8000 rpm, ATC:32 pieces *If there are any discrepancies between the product description and the actual product, the actual product will take precedence.

2005 Mazak FH-8800

• Manufacturer: Mazak
• Model: FH 8800

120 ATC, B-axis 1/1000 deg. B-axis 1/1000 deg. Side-through, Touch sensor Touch sensor In case of any discrepancy between the description and the actual product, the actual product will be given priority.

2017 Mitsubishi MV2400S EDM Wire-cut

• Manufacturer: Mitsubishi
• Model: MV2400S

T:840×560, ST:X600×Y400×Z310UV±75, Maximum workpiece dimensions:1050×800×295, Maximum workpiece weight:1500kg,3500kg

2007 Mitsubishi FA40VM EDM Wire-cut

• Manufacturer: Mitsubishi
• Model: FA40

Maximum workpiece processing dimensions: 1550*1300*395, stroke: X1000*Y800*Z400, Table: 1360*1175

2016 Fanuc Alpha-D14MiB5

• Manufacturer: Fanuc

FANUC 31i-B5,. S:(X)500*(Y)400*(Z)330mm,. T:650*400mm, 100 to 10000rpm, ATC: 14 pcs. In case of any discrepancy between the description and the actual product, the actual product will be given priority.

2008 FANUC α-T14iFS

• Manufacturer: Fanuc

FANUC-31i-MA5,. BBT30,. S:(X)300*(Y)300+100(Z)330mm, T630*330mm, 100 to 10000rpm, ATC: 14 columns, 100mm high column In case of any discrepancy between the description and the actual product, the actual product w...

1997 SHIGIYA SEIKI GP-30B/40A

• Manufacturer: Seiki

Swing over table:300mm,. Distance between centers:400mm, Grinding wheel: (OD)φ405*(W)50*(ID)φ152.4mm, 29～363rpm(60Hz), No.4, MT. Table swivel angle: (wheelhead side)11°(operator side)1 If there is any discrepancy...

1991 Maruei Machinery MIG-MG-300

• Manufacturer: Maruei Machinery

Swing over tableφ:170mm,. Distance between centers: 300mm, Max. grinding outer diameter: φ60mm Grinding wheel: (OD)φ205*(W)13*(ID)φ50.8mm, Wheelhead swivel: ±30°, Spindle head swivel: ±45 Spindle head swivel: ±45...

Shizuoka Ironworks VHR-SD

• Manufacturer: Shizuoka
• Model: VHR-SD

Turret type, T:1100*280mm, T:1100*280mm, T:1100*280mm T:1100*280mm, Table travel: (L/R)820*(back/forth)300*(up/down)450mm, Ram travel distance: 535mm, 20～4500rpm, Spindle tilt angle: (right/left)90°, Ram swivel a...

2004 Nippei Toyama DSG-12V

• Manufacturer: Nibuya Toyama

FANUC PowerMateD,. Max. machining: Outer diameter φ7.6*thickness 4.9mm, Grinding wheel: Outer diameter MAX305*thickness MAX50*hole diameter φ170mm, Peripheral speed 2100m/min. Grinding wheel: Outer diameter MAXφ3...

Tools / tools / Engraving

Please contact us for size etc.

Yodogawa Electric FG-205T

• Manufacturer: Yodogawa Electric

Grinding wheel dimensions: φ205*19*φ15.88mm Three-phase 200V Dust collector included *If there are any discrepancies between the product description and the actual product, the actual product will take precedence.

2001 FANUC α-T14iB Robodrill

• Manufacturer: Fanuc
• Model: -T14IB

FANUC-16iM