Used Machine Tools in Aichi, Japan

Nakane Seisakusho NST-13H
- Manufacturer: Nakane Manufacturing Co.
Swing: 360 mm,. Drilling capacity: 13mm, (steel)10(cast iron)12mm, (cast iron)12mm, (steel)10(cast iron)12mm Threading capacity: (steel)10(cast iron)12mm,, Spindle taper: .2½, .2½, .2½ Spindle taper: .2½, Table: ...
Toyohashi, Japan
2004 Miyano BNE-34SY
- Manufacturer: Miyano
- Model: BNE34SY
FANUC18i-T,. Max. machining: Main/sub dia. 34*90mm, Upper turret 12 square, S:X150*Z380*Y±40mm S:X150*Z380*Y±40mm, Lower turret 10 square, S:X115*Z1212mm S:X115*Z125mm, Sub B-axis Sub B-axis, Main and sub Main an...
Toyohashi, Japan
1998 Takizawa Ironworks TAC510×1000
- Manufacturer: Takizawa Iron Works
FANUC 20T,. Swing over bed:510mm,. Distance between centers:1000mm, S:X285*Z955mm, 15 to 1500rpm, 3-jaw 10-inch chuck (Kitagawa JN10T), with splash cover With splash cover If there is any discrepancy between the ...
Toyohashi, Japan
Amada CSW-250
- Manufacturer: Amada
- Model: CSW-250
Sheet metal machine Current status: Available for immediate delivery
Nagoya, Japan
2002 Techno Washino C3
- Manufacturer: Washino
- Model: C3
FANUC-21i-T, Swing above bed: φ550mm, Center distance: 800mm, S: 340mm x 650mm, 23-1800 rpm (16 speeds), 3-jaw 9-inch chuck *If there are any discrepancies between the product description and the actual product, ...
Toyohashi, Japan
unidentified unidentified block
- Manufacturer: unidentified
1 set, V block
Aichi, Japan
2006 Techno Washino G07-M
- Manufacturer: Washino
FANUC 21i-TB, Maximum swing: φ285, Standard workpiece size: φ100*100mm, Spindle speed: 6000 rpm, 6-inch 4-jaw chuck, Milling unit: 625-2500 (low speed) / 1250-5000 (high speed), S: (X)480*(Z)285mm *If there are a...
Toyohashi, Japan
Takeda TC-22N-3
- Manufacturer: タケダ
Pressing capacity 10ton, corner notch 220 x 220, maximum plate thickness 3.2mm, machine No. 11727
Handa, Japan
Yoshida Iron Works YR5-130
- Manufacturer: Yoshida
- Model: YR5-130
Drilling capacity: 50mm(steel), M48(steel), M48(steel), M48(steel), M48(steel), M48(steel), M48(steel) Threading capacity: M48 (steel), Distance from column surface to spindle center: 290 to 1300 mm Distance from...
Toyohashi, Japan
1990 OKADA/TOMINAGA TRE-2000D
- Manufacturer: Okada
Drilling capacity: 75mm(steel), M60(steel), M60(steel), M60(steel), M60(steel), M60(steel), M60(steel) Threading capacity: M60 (steel), Distance from column to spindle center: 410 to 2020mm, Spindle end to base f...
Toyohashi, Japan
1982 National / Matsushita DUAL-POWER DG500 / YM-500DG
- Manufacturer: Matsushita
※ If there is a difference between the description content and actual item, we will prioritize the actual item.
Toyohashi, Japan
DAIHEN PET130KRJ-130(SS)
- Manufacturer: Daihen
※ If there is a difference between the description content and actual item, we will prioritize the actual item.
Toyohashi, Japan
1988 InverterPair200GP/AD-GP, Hitachi, Ltd.
- Manufacturer: Hitachi
AC/DC, AD-GP, AD-GP, AD-GP, AD-GP, AD-GP, AD-GP AD-GP, Rated output current: 200A, Rated output current: 200A, Rated output current: 200A Rated output current: 200A, Rated input: 7.1kVA Rated input:7.1kVA In case...
Toyohashi, Japan
1999 Amada VM-420
- Manufacturer: Amada
- Model: VM-420
Cutting capacity: Max. 420 x 300 x 150 Machine No. 42000017
Handa, Japan
Yamazaki Iron Works MAZAK-860
- Manufacturer: Mazak
ベッド上の振り:460mm, センター間距離:1000mm, .5, 25～2500rpm ※記載内容と現品に相違がある場合は、現品を優先させて頂きます。
Toyohashi, Japan