Toyohashi, Japan
1997 Hitachi Koki C13MA
- Manufacturer: Hikoki
For woodworking, Power supply: AC100V 50/60㎐, Rotation speed: 2800 rpm, Maximum depth of cut: 126 mm, Saw blade: 335 mm In case of any discrepancy between the description and the actual product, the actual produc...
Toyohashi, Japan
Makita 3800N
- Manufacturer: Makita
Power supply: AC100V 50 / 60Hz, Rotation speed: 8500 / min, Applicable slotted cutter: Outer diameter 120 mm, Blade width: 2.4 to 46 mm ※ If there is a difference between the description and the actual item, we w...
Toyohashi, Japan
1997 Changun ST-5
- Manufacturer: Chang
Swing over the bed: 575mm, Distance between centers:1500mm, 25~2000rpm(18 steps), 8-inch 3-jaw chuck (SOUL・HK#200), With 1-axis digital With slide stopper With 380mm 4 jaw chuck If there is any discrepancy betwee...
Toyohashi, Japan
2007 Okuma LCS-250
- Manufacturer: Okuma
- Model: LCS-250
OSP-P20L, Swing over the bed: 450mm, Maximum processing: φ270*280mm, S: (X)155*(Z)320mm, 100 to 4200rpm, Octagonal turret, Pin arbor chuck (Imperial OPA-100), No tailstock, No tailstock, with chip control, No gan...
Toyohashi, Japan
2007 Takisawa Ironworks TC-200 CML6
- Manufacturer: Takisawa
- Model: TC200
FANUC-21i-TB,. Swing: 420mm, Distance between centers: 600mm, Distance between centers: 600mm, Distance between centers: 600mm Distance between centers: 600mm, Max. machining: ø310*607mm, S: X190*Z600mm S:X190*Z6...
Toyohashi, Japan
2001 Okuma LCS-25
- Manufacturer: Okuma
- Model: LCS-25
OSP-E10L(Rakuraku Dialog),. Swing over bed: 520mm,. Max. processing:φ310*480mm S:X220*Z520mm, 25～3000rpm, 12-corner turret, Without center press, 10-inch chuck 10-inch chuck (HOWA H037M10) With chip-con (back dis...
Toyohashi, Japan
2001 Okuma LCS-25
- Manufacturer: Okuma
- Model: LCS-25
OSP-E10L(Raku-Raku Dialogue), Swing over bed: φ520, Maximum processing: φ310*480, S:X220*Z520, 25~3000rpm, 12 square turret, No tailstock, 10-inch chuck (HOWA H037M10), Chip control (backward), Equipped with gant...
Toyohashi, Japan
1998 Miyano BNE-34S3
- Manufacturer: Miyano
- Model: BNE34S3
2-turret, 2-spindle type, FANUC-18T, FANUC-18T, FANUC-18T, FANUC-18T FANUC-18T, Max. machining: φ34*90mm, L main spindle: 170~5000rpm L main spindle: 170 to 5000 rpm Turret: 10 square, S:(X)115*(Z) S:(X)115*(Z)12...
Toyohashi, Japan
2000 Alps AX-5
- Manufacturer: Alps
3m specification,. Material diameter: φ18 to φ60mm, flat 16 to 46mm, Used for Mazak INTEGREX In case of any discrepancy between the description and the actual product, the actual product will be given priority.
Toyohashi, Japan
BOSCH / Bosch GSC 2.8
- Manufacturer: Bosch
- Model: GSC 28
Single phase AC 100 V (50/60 Hz), Number of strokes: 2500 min, Minimum curve Cutting radius: 20 mm, Cutting capacity: (mild steel plate) 2.8 mm (stainless steel) 2.0 mm (aluminum) 3.5 mm ※ If there is a differenc...
Toyohashi, Japan
2004 Nakamura-Tome Precision Industry WT-150
- Manufacturer: Nakamura
- Model: WT 150
Opposed 2-spindle, 2-turret type FANUC-18iTB, Swing:190mm, Max. machining: 190*400, S:X1157.5*X2167.5*Z1465*Z2465*Y±Y S:X1157.5*X2167.5*Z1465*Z2465*Y±35 L spindle: 5000rpm (non-step), R spindle: 5000rpm (non-step...
Toyohashi, Japan
2006 Mori Seiki NZ-S1500
- Manufacturer: Mori Seiki
- Model: NZ-1500
Suitable for Shaft Machining, MSC-700(FANUC-32iA) MSC-700(FANUC-32iA), Max. Max. machining: φ120*535mm, Standardized bore size: φ20-60mm Standardized bore size: 20 to 60mm dia. S: (X1)60*(X2)60*(Z1)580*(Z2)580mm,...
Toyohashi, Japan
Kitagawa Iron Works KBT-360
- Manufacturer: Kitagawa
Drilling: 13mm,. Tap: (steel)10mm In case of any discrepancy between the description and the actual product, the actual product will be given priority.
Toyohashi, Japan
DELUXE 909
- Manufacturer: DELUXE
※ If there is a difference between the description content and actual item, we will prioritize the actual item.
Toyohashi, Japan
Tip: Enter manufacturer, model or keyword