Used Machine Tools in Gunma, Japan

2008 RIKEN RBL-51
- Manufacturer: RIKEN
Collet chuck Spindle through-hole diameter 31, 500 between centers Spindle speed 50-3000 rpm Swing on bed 280 with 2-axis digital scale [This machine was used in a school] If there is any difference between the c...
Tatebayashi, Japan
1989 Amada VERSA-206
- Manufacturer: Amada
- Model: VERSA-206
Maximum cutting size 200 x 200 Angle cutting 60°-130° If there is any discrepancy between the content and the actual product, the actual product will take precedence.
Tatebayashi, Japan
2015 Amada CSHW-220
- Manufacturer: Amada
- Model: CSHW-220
Max. processing thickness 6mm Max. processing dimension 220 x 220 *No edge notch If there is any discrepancy between the contents and the actual product, the actual product will be given priority.
Tatebayashi, Japan
1998 Takizawa TAL-460
- Manufacturer: Takizawa
9-inch 3-jaw chuck, spindle through-hole diameter 52, spindle speed 25-1500 rpm, center distance 800, swing above bed 460, swing above cross feed table 250, with 2-axis digital scale. If there is a discrepancy be...
Tatebayashi, Japan
1997 Takizawa TAL-560
- Manufacturer: Takizawa
análisis de calidad del agua Product name: General-purpose lathe | Warehouse: Machine Plaza Honjo (Honjo, Saitama)
Tatebayashi, Japan
Dainichi DHK75×300
- Manufacturer: Dainichi
- Model: DHK75300
φ450.4 jaw single action chuck, spindle through hole diameter 84, center distance 3000, spindle rotation speed 9-800 rpm, swing above bed 750, swing above carriage 530, swing above cut-off 1000, with steady stopper.
Tatebayashi, Japan
2001 Takizawa TSL-550
- Manufacturer: Takizawa
7-inch 3-jaw scroll chuck 550 rpm between centers Spindle speed 83-1800 rpm Spindle through-hole diameter 35 360 swing on bed 210 swing on reciprocating table If there is any difference between the contents and t...
Tatebayashi, Japan
1989 Takizawa TAL-460
- Manufacturer: Takizawa
9-inch 3-jaw chuck (Kitagawa/JN09T) Spindle through-hole diameter 52 Spindle speed 25-1500 rpm Center to center 800 Swing on bed 460 Swing on horizontal feed table 250 With 2-axis digital scale If there is any di...
Tatebayashi, Japan
1996 Takizawa TAL-560
- Manufacturer: Takizawa
9 inch 3-jaw scroll chuck, center distance 1500, rotation 25-1500 rpm, through hole diameter 76, bed top swing 560, reciprocating table top swing 340, with cut-off. If there is a discrepancy between the contents ...
Tatebayashi, Japan
2004 Wasino LEO-80A
- Manufacturer: Amada - Wasino
- Model: LEO-80A
10-inch 3-jaw scroll chuck (Kitagawa/JN10RA6) Spindle through-hole diameter 54, 800 between centers Spindle speed 25-2000 rpm Swing on bed 490 Swing on reciprocating table 260 If there is any difference between t...
Tatebayashi, Japan
1982 Dainichi Metal Industry DHK75×150
- Manufacturer: Dainichi
12-inch 3-jaw scroll chuck, center distance 1500, spindle speed 9-800 rpm, through hole diameter 84, swing above bed 750 If there is a discrepancy between the contents and the actual product, the actual product w...
Tatebayashi, Japan
Mori Seiki MS-850
- Manufacturer: Mori Seiki
- Model: MS-850
10-inch 3-jaw hydraulic chuck 850 between centers Spindle speed 32-1800 rpm Swing on bed 435 Swing on horizontal feed table 250 If there is any difference between the contents and the actual product, the actual p...
Tatebayashi, Japan
Takizawa TAL-510
- Manufacturer: Takizawa
9-inch 3-jaw scroll chuck, spindle through diameter 52, center distance 1000, rotation speed 25-1500 rpm, bed overswing 510, reciprocating table overswing 300, with cut-off. If there is a discrepancy between the ...
Tatebayashi, Japan
1988 Mori Seiki MS-1250G
- Manufacturer: Mori Seiki
- Model: MS-1250G
10-inch 3-jaw chuck, spindle through-hole diameter 52, spindle speed 32-1800 rpm, center-to-center 1250 rpm, with cut-off, swing 435 on bed, with 2-axis decimal scale If there is any discrepancy between the conte...
Tatebayashi, Japan
Okuma Iron Works LS
- Manufacturer: Okuma
- Model: LS
450φ4 jaw single action chuck Spindle speed 19-1000rpm 800 between centers Swing on bed 540 If there is any discrepancy between the contents and the actual product, the actual product will take priority.
Tatebayashi, Japan