Used Machine Tools in Gunma, Japan

2000 Amada FBD-8025NT
- Manufacturer: Amada
- Model: FBD-8025NT
80t Table length 2500 Stroke length 150 Gap depth 400 Open height 420 Machine weight 6.2t
Tatebayashi, Japan
1991 Nikotech RFB-8020
- Manufacturer: Nicotech
80t, table length 2000, stroke length 100, with safety device (Komori / DSP-J) *The machine was used at a school. In case of any discrepancy between the contents and the original, the original will be given prior...
Tatebayashi, Japan
1993 Amada DCT-1213
- Manufacturer: Amada
- Model: DCT-1213
13×1260 Electric Clearance Auto back gauge Machine weight 9.4t If there is any discrepancy between the contents and the actual product, the actual product will be given priority.
Tatebayashi, Japan
2010 Amada HDS-1703NT
- Manufacturer: Amada
- Model: HDS-1703NT
170t Stroke length 250 Table length 3220 Gap depth 450 Open height 520 Machine mass 20t If there is a discrepancy between the contents and the actual product, the actual product will take precedence.
Tatebayashi, Japan
1996 Amada RG-100S
- Manufacturer: Amada
- Model: RG-100S
100t Stroke length 100 Table length 2500 Gap depth 400 Open height 370 Auto back gauge Machine weight 6.0t If there is any discrepancy between the contents and the actual product, the actual product will take pri...
Tatebayashi, Japan
1983 Amada RG-100L
- Manufacturer: Amada
- Model: RG-100L
100t Stroke length 100 Table length 4000 Gap depth 500 Open height 370 Auto back gauge Machine weight 7.5t
Tatebayashi, Japan
1993 Komatsu PHS25×125
- Manufacturer: Komatsu
- Model: PHS25
25t, Table Length 1250, Stroke Length 100, Gap Depth 200, Open Height 325 Stroke Length 100, Manual Back Gauge, Light Stabilizer *This machine was used at a school. If there are any discrepancies between the desc...
Tatebayashi, Japan
1999 Orii LCC03KLMBP-TTS
- Manufacturer: Orii
Plate width 50-300 Plate thickness 0.3-3.2 Maximum line speed 12m/min Maximum coil mass 1500kg Machine weight 1.0t *Feed from right to left If there is a discrepancy between the contents and the actual product, t...
Tatebayashi, Japan
2006 HOWA OHKUMA 2SP-V60
- Manufacturer: Okuma
- Model: V60
FANUC0-TT 24-inch 3-jaw chuck on both sides 12-sided turret on both sides Maximum machining diameter 610 Maximum machining length 660 Stroke: X370 Z660 Rotation speed 20-2000 rpm Left and right output chip convey...
Tatebayashi, Japan
1992 Fuji Kiko SMP-30
- Manufacturer: Fuji
In case of any discrepancy between the contents and the actual product, the actual product will be given priority.
Tatebayashi, Japan
2007 Kitamura KNC-100G
- Manufacturer: Kitamura
FANUC Collet Chuck Specifications, Table 300 x 160, Includes 4 End-Face Rotary Tools (Motor Driven), Includes Mist Collector. *Video recording is available. Please feel free to contact us.
Tatebayashi, Japan
2005 TOYO SEIKI TVT-301S
- Manufacturer: Toyo
FANUC21i-MB BT30 12 ATCs Table size 650 x 400 Spindle speed 8000 rpm Stroke X500 Y400 Z300 If there is any discrepancy between the contents and the actual product, the actual product will take priority.
Tatebayashi, Japan
T/T y Western Union
- Manufacturer: Union
FANUC21i-TB Four-caret chuck (Koyo/HSR-250) with 8 square turret and post-tip conveyor If there is any discrepancy between the contents and the actual product, the actual product will be given priority.
Tatebayashi, Japan
2016 Mori Seiki NZX-2500/600
- Manufacturer: Mori Seiki
- Model: NZX-2500
M730BM (MELDAS) Chuck (SOUL/UBL-10) Turret x 2 (upper: 12-sided / lower: 8-sided) Spindle speed 1400 rpm With center With rear-discharge chip conveyor If there is a discrepancy between the contents and the actual...
Tatebayashi, Japan
2007 Takamatsu Machinery Industry X-150
- Manufacturer: Takamatsu Machinery Industry
FANUC 0i-TB 8-inch 3-jaw chuck (Kitagawa/B-208) 8-sided turret with center If there is a discrepancy between the contents and the actual product, the actual product will take precedence.
Tatebayashi, Japan