Used Machine Tools in Illinois, USA

Dallas 48" x .125"

• Manufacturer: Dallas

Dallas 48" x .125" x 30,000 lb Servo Coil Feed Line 30,000 lb. Dallas 48" x .125", DCR-30,000x48 Uncoiler, DPS-3.5-7-48 7-Roll Straightener, DRF-648 Servo Feeder EQUIPPED WITH: Dallas DCR-30,000x48 Uncoiler/Coile...

Sleeve Lebus Grooved (#1496)

Sleeve Lebus Grooved (#1496) Sleeve Lebus Grooved, Two Shells, 4' Inner Diameter, 64" Width

Accumulator Power Unit (APU)

• Manufacturer: Oceaneering International

Accumulator Power Unit (APU) Accumulator Power Unit (APU), 25 HP, 230/460 V, 50Hz, 70" x 39" x 61" Electric Motor & Hydraulic Pump Dimension

Aluminium Transit Box w/ 60HP Gold Subsea Motor

• Manufacturer: Oceaneering International

Aluminium Transit Box w/ 60HP Gold Subsea Motor Aluminium Transit Box, w/ Electric Gold Motor, 60 HP, 23.6" x 27.5" x 47.2", 397 lb.

ROV Skid

• Manufacturer: Oceaneering International

ROV Skid ROV Skid, OI HD -02, Aluminium Frame with Almagal Tube and Fybroc Motor, 55" x 118" x 29" Dimension

1997 Minster 15,000 LB. X 26" X .35" Servo Feed Line

• Manufacturer: Minster

Minster 15,000 LB. X 26" X .35" Servo Feed Line 15,000 lb. Minster, 26” x .35”, w/ MEF5-26S Servo Feed, MTT12-26S Thread Table, MSH30-26-7 Straightener, MR15-26S Coil Reel, 1997 MEF5-26S SINGLE ROLL ELECTRIC FEED...

Baldor 1250

• Manufacturer: Baldor - Reliance

Baldor 1250 Pedestal Mounted Buffer Baldor 1250, 12" Wheel Ø, 1.25" Shaft Ø, 1800 RPM, 2 HP

Sleeve Lebus Grooved (#1452)

Sleeve Lebus Grooved (#1452) Sleeve Lebus Grooved, 1.34" Sleeve, 46.9" Core, 55.3" Wide

KOYO KVD-300S

• Manufacturer: Koyo
• Model: KVD-300S

Koyo KVD-300s CNC Double Disc Grinder KOYO KVD-3005, 1500 RPM, 12" Grinding Wheel Diameter, 2" Grinding Wheel Width

2000 Sodick Model AQ550L CNC Wire Type Electrical Discharge Machine ()

• Manufacturer: Sodick
• Model: AQ550L

Imperial Metric Sodick Model AQ550L CNC Wire Type Electrical Discharge Machine LN1W CNC Control Auto Threading Submerged

DRILLING EQUIPMENT

Good used GH30 Gearmatic winch with cable, 30,000 LBS. also have good used pump and valves if needed

DRILLING EQUIPMENT

Good used GH50 Winch with good cable on it. 50,000 LBS Line pull. Also have pump and valves if needed

2005 Walter Woodtronic C5 CNC Circular Blade Grinder ()

Imperial Metric Walter Woodtronic C5 CNC Circular Blade Grinder SPECIFICATIONS: Economical "one setup" topper/facer Benefits: o Up to 30% higher productivity than competing machines o Faster control processin...

2001 Haeger Model 824 One Touch 1H Fastener Insertion Machine

Imperial Metric Haeger Model 824 One Touch 1H Fastener Insertion Machine Dimensions 59” x 38” x 94” 2800 lbs