Used Machine Tools in Oregon, USA

Armstrong Bandsaw Sharpener, Right Hand Pro-Filer Automatic Bandsaw Sharpener

• Manufacturer: Armstrong

Armstrong Right Hand Pro-Filer Automatic Bandsaw Sharpener for both Stellite and Swaged tooth saws. Built-in diamond wheel dresser. Variable speed motors for grinding wheel and saw tooth feed rate. Air clamp. ...

New Oliver Cut-Off Saw, Model 5025.002 18" Cut Off Saw

One (1) New Oliver Model 5018.002 18"Left Hand Cut Off Saw with 7-1/2HP 3 phase motor prewired for 230 volts. 3450 RPM arbor speed. Left Hand Model uses an 18" diameter saw blade with 1" bore (saw blade not inc...

Invicta 2-Saw, 10' Wide Sliding Table Panel Saw

Used ) Invicta 2-Saw, 10’ Wide Sliding Table Panel Saw. Model RP31 Tetra “A”. Built in 2002. Adjusts from 12” to 120”. Saw stations are both adjustable to 45º. Main saw motors are approx. 5HP and have 14” di...

SELCO Model EB100 Front Load Horizontal Beam Panel Saw

• Manufacturer: Selco

Used SELCO Model EB100 Front Load Horizontal Beam Panel Saw Max. Cutting Length: 3800mm - Max. Pusher Stroke: 3200mm - Max. Blade Projection: 100mm - Max. Gripper Opening: 97mm - Automatic Side Squaring Device - ...

SAFETY SPEED CUT Model 7400 Vertical Panel Saw

One Used SAFETY SPEED CUT Model 7400 Vertical Panel Saw (American made) Standard Equipment • 3 Hp continuous duty induction saw motor, 7.6 amps 230 volt 3 phase with optional Scoring Blade • Maximum crosscut 6...

TREGARNE Wood Welder, Brand New

One (1) Brand New TREGARNE Wood Welder. See photos of TREGARNE Wood Welder on our web site. Inventory -187 .

Simonds Bandsaw Leveler, Automatic Bandsaw Leveler

One Used Simonds Automatic Bandsaw Leveler Model Optimatic RMO 942 built in 2001 (Built by Walter Oppliger-Switzerland for Simonds). 480 volts 60 hz. Last owner reports Leveler in excellent operating condition b...

New CROSSCUT SOLUTIONS Cut-Off Saw, Model CCS-18M Cut-Off Saw

One New CROSSCUT SOLUTIONS Model CCS-18M Cut-Off Saw, (right or left hand models) mechanically operated, 2" x 12" capacity, 7 1/2 HP motor, TEFC 230/460 volt 3 phase, 60 cycles, includes magnetic starter with 110...

Armstrong Bandsaw Leveler

• Manufacturer: Armstrong

Armstrong Bandsaw Leveler, S/N 20263. Automatic bandsaw leveler is 120V single phase, 50/60Hz. Unit is in excellent condition and can be demonstrated. Includes saw support extensions and operator's manual. See...

Armstrong Trim and Chop Saw Sharpener, Model No. 16 Automatic Trim and Chop Saw Sharpener

• Manufacturer: Armstrong

Armstrong Model No. 16 Automatic Trim and Chop Saw Sharpener. Handles saws from 8”- to 40”-diameter, speed of 34.8 teeth per minute, 1/4" to 2" tooth space, 1/4" to 1" tooth depth, 0- to 30º positive hook, 0- to...

Bandsaw Guide Dresser, Heavy Duty Automatic Bandsaw Guide Dresser

Heavy Duty Automatic Bandsaw Guide Dresser. 110V operation. Carbide cutter. Automatic table traverse. Inside light. 10" X 1-1/2" 90 degree fixture. Full enclosure. Excellent condition. See photos of Heavy ...

Tri-State Cut Off Saw Left Hand 2x8 Pneumatic

Tri-State Left Hand 2x8 Pneumatic Cut Off Saw with knee switch control. 14" dia. blade capacity. Appears to be in good condition. See photos of used Tri-State Left Hand 2 x 8 Pneumatic Cut off Saw on our Web S...

Bandsaw Guide Dresser, Heavy Duty Automatic Bandsaw Guide Dresser

Heavy Duty Automatic Bandsaw Guide Dresser. 110V operation. Carbide cutter. Automatic table traverse. Inside light. 10" X 1-1/2" 90 degree fixture. Full enclosure. Excellent condition. See photos of used He...

Industrial Model N510R Right Hand High Speed Chop Saw, Air Lift

Industrial Model N510R Right Hand High Speed Chop Saw, Air Lift. 7-1/2 HP 208-230/460V motor, 2” X 12” capacity. Adjustable cycle speed up to 90 strokes per minute. Requires compressed air at 60 PSI minimum at...

Industrial Model N510L Left Hand High Speed Chop Saw, Air Lift

Industrial Model N510L Left Hand High Speed Chop Saw, Air Lift. 7-1/2 HP 208-230/460V motor, 2” X 12” capacity. Adjustable cycle speed up to 90 strokes per minute. Requires compressed air at 60 PSI minimum at ...

Hardinge DSM 59 Lathe

• Manufacturer: Hardinge
• Model: DSM 59

Good condition Hardinge DSM 59 Lathes available between 1960 and 1972 years. Located in USA and other countries. Click request price for more information.