Used Machine Tools in Saxony, Germany

WMW bearing pedestal

• Manufacturer: WMW

Bearing block, counter bearing for milling spindle WMW Ø 55 mm x 60 mm Distance spindle center - upper edge of dovetail: 60 mm dovetail guide: 219 / 192 mm, height: 21 mm, width: 75 mm used, tested !

WMW bearing pedestal

• Manufacturer: WMW

Bearing block, counter bearing for milling spindle, ball bearing WMW Ø 35 mm x 135 mm Distance spindle center - upper edge of dovetail: 135 mm dovetail guide: 160 / 123 mm, height: 25 mm, width: 70 mm used, tested !

PAGUS metal bellows coupling

• Manufacturer: Pagus

Metal bellows coupling, bellows coupling PAGUS Ø 40 / 42 mm 6-corrugated bellows New !

MÜLLER GERÄTEBAU Venturi mixer

• Manufacturer: Muller

Venturi mixer, emulsion mixer, drum top mixer MÜLLER EQUIPMENT MINI 2 - 3000 DIGITAL 3000 l/h at a flow pressure of 2.5 bar Digital display: RED LIONS CONTROLS Model: MLPS1 approx. 1.0 m connection cable used, te...

OTT - JAKOB Rotating union

• Manufacturer: OTT

Rotating union for coolant OTT - JAKOB 95.101.726.2.2 ( 9510172622 ) 95.250.022.3.0 ( 9525002230 ) 293357 K Housing diameter: Ø 48 mm, length: 75 mm Shaft stub: Ø 16 / 20 mm, length: 20 mm New !

OTT - JAKOB installation clamps

• Manufacturer: OTT

Installation clamp, installation clamping head OTT - JAKOB BA 600-2G 95.600.602.9.2 ( 9560060292 ) 372506 thread: M16 x 1.5, length: 30 mm New !

ORTLINGHAUS mechanical clutch

• Manufacturer: ORTLINGHAUS

mechanical clutch ORTLINGHAUS CLUTCHES serial no. 89-15483 with thrust bearing and additional shift ring New !

ORTLINGHAUS mechanical clutch

• Manufacturer: ORTLINGHAUS

mechanical clutch, multi-plate clutch ORTLINGHAUS CLUTCHES serial no. 39 used, tested !

WMW mechanical clutch

• Manufacturer: WMW

mechanical clutch, multi-plate clutch WMW, DRESDEN CLUTCH FACTORY 4 - TGL 42398 used, tested !

POLO Filter-Technik coolant reconditioning

• Manufacturer: POLO

Coolant treatment, inclined bed filter with magnetic filter POLO filter technology Inclined bed filter: SB-A0.4 Magnetic filter: MAF-0150 50 Hz used, tested !

PAGUS V-belt pulley

• Manufacturer: Pagus

V-belt pulley, stepped pulley PAGUS Ø 299 - 351 mm shaft length: 75 mm, groove width: 10 mm material: Aluminum ( pulley ), steel ( hub ) used, tested !

WMW bearing pedestal

• Manufacturer: WMW

Bearing block, counter bearing for milling spindle WMW Ø 70 mm x 150 mm Distance spindle center - upper edge of dovetail: 150 mm dovetail guide: 200 / 155 mm, height: 30 mm, width: 135 mm used, tested !

FLEXTORY torque limiter

• Manufacturer: FLEXTORY

Torque limiter, slip hub, slip clutch, safety clutch FLEXTORY GERMANY FT700 TORQUE LIMITER New !

SKF hydraulic nut

Hydraulic nut SKF HMV 12 New, preserved ! Thread: M60 x 2.0 | Hub: Max. 5 mm | P: max. 80 MPa ( 800 bar ) | Outer diameter: 125 mm | Width: 43 mm | Dimensions: 165 x 125 x 43 mm

PAGUS top slide

• Manufacturer: Pagus

Top slide PAGUS Holder for steel holder system MULTIFIX Size: B used, tested !