Used Machine Tools in Saxony, Germany

HOFFMANN coolant dispersion

• Manufacturer: Hoffmann

Coolant expansion, coolant filter, suction belt filter HOFFMANN HSF 200 E 220 / 380 V used, tested !

AS TECH Hydraulic nut

• Manufacturer: AS TECH

Hydraulic nut AS TECH HWS16111131 7550.04 KG4 158 kN 700 bar used, tested !

HOFFMANN cooling unit

• Manufacturer: Hoffmann

Cooling unit for coolant HOFFMANN ERK 210-V Connected load 11 kW 380 V used, tested !

FILTER TECHNOLOGY GERA Coolant system

• Manufacturer: FILTER TECHNOLOGY GERA

Coolant system FILTER TECHNOLOGY GERA Coolant system incomplete ( drive for the belts is missing (picture 2) ) with 4 Brinkmann pumps TBR63/270 (2 times) TB303/370-T TB250/350 New !

AMK chip conveyor

Chip conveyors, hinged plate belt chip conveyors AMK AUTOMATION Type 1100 x 430 Drive motor: 0.25 kW 230 / 400 V 3AC Coolant pump: SCHMALENBERGER SM 32-13/2 Pump motor: ATB AF 90L/2M-12L+E2 2,2 kW 2840 rpm 230 / ...

BARRY air spring

• Manufacturer: BARRY CONTROLS GmbH

Air spring, machine base BARRY CONTROLS GmbH SLM-48 internal thread: M14 x 2.0, depth: 20 mm used, tested !

WMW service unit

• Manufacturer: WMW

Service unit, machine control WMW SERVICE UNIT III AUERBACH Fkr SRS 250/1 ( AUERBACHFkrSRS250/1 ) approx. 6 m connection cable picture similar ! used, tested !

PAGUS mechanical clutch

• Manufacturer: Pagus

Mechanical clutch PAGUS Hollow shaft 1: Diameter: Ø 24 mm 1 groove Hollow shaft 2: Diameter: Ø 21 / 25 mm 4 grooves spare part for milling machine FRITZ WERNER FV1 ! used, tested !

PAGUS all-metal damper

• Manufacturer: Pagus

All-metal damper, machine foot set, leveling foot set, vibration isolator, 4 pieces PAGUS Ø 25 x 20 mm Threaded hole: M6 x 1.0 Depth: 10 mm 2x hole: Diameter: Ø 7 / 12 mm ( for hexagon socket screws ) Material: S...

FEIN tin snips

• Manufacturer: Fein

Sheet metal shears, high-frequency sheet metal shears, high-frequency tool, high-frequency machines FEIN QSz 838 0.24 kW 1850 strokes/min 265 V 3AC 200 Hz approx. 3.5 m connection cable used, tested!

HSS twist drill MK2 #24266

Diameter 14.5 mm with Morse taper MK2 WMW Werkö HSS twist drill with tool taper - Diameter 14.5 mm - Steam-treated - Profile ground - with Morse taper MK2 - Right-hand cutting - For all normal drilling work in st...

FIXATOR level raising range

• Manufacturer: Pagus

Level raising range for machine feet e FIXATOR 7 pieces Ø 100 mm x 1 mm, with slot 24 mm 8 pieces Ø 100 mm x 2 mm, with slot 24 mm 1 piece Ø 100 mm x 4 mm, with slot 24 mm 1 piece Ø 100 mm x 5 mm, with slot 24 mm...

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW DH 200 x 3 ( DH200x3 ) TGL 30-2333 centering Ø: 107 / 103 mm, depth: 17 mm ( conical ) used, tested !

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW, ROTO RECORD DH 250 x 3 ( DH250x3 ) TGL 30-2332 used, tested !

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW DH 250 x 3 ( DH250x3 ) TGL 30-2333 used, tested !