- Trusted Seller
3700 Gallon SS Tank
- Manufacturer: Taylor
TAYLOR Taylor SS Neutralization Tank, s/n 96-163-1996, 96"diax 12'H, 603cft volume, approx. 3700 gallons capacity, 20"dia side MH with legs support cage access ladder, inspection platform. CONDITIONS: All quotati...
Houston, TX - Trusted Seller
1700 Gallon SS Tank
SS TANK SRS SS Cone Bottom Tank, approx 1700 gallon, theo blow down tank, approx 6'dia x 14' total tank height, 8'H straight x 5'cone on legs support, center bottom discharge port, pneumatic slide gate dump valve...
Houston, TX - Trusted Seller
1800 Gallon SS Tank
- Manufacturer: Crepaco
CREPACO SS Mix Tank, approx 1800 gal, 80"dia x 8'H straight, dome top, dish bottom, (2) 18" dia MH, with 15hp top mounted lighting mixer, model M94Q15, 11.3 ratio, 115V, 4 blades axial flow agitator, plus (1) app...
Houston, TX 2001 Rodrill 635T
- Manufacturer: Rodrill
Rare Rodrill manufactured track rig currently available This rig was designed and manufactured by Rodrill in San Antonio, TX. The design is very similar to a mix between a Texoma 700 and an H&T 635. It utilizes a...
$85,000 USDAurora, TX- Trusted SellerAuction
John Crane Indufil Type 89405293 Duplex Liquid Filter 60GPM
- Manufacturer: John Crane
John Crane Indufil Type 89405293 Duplex Liquid Filter 60GPM, Cartridge Type 87479165-EL, Minimum -20° F (-29° C) Maximum 212° F (100° C) Design Temperature, 3.17 USG (16.2 Bar (g), Volume, 235 PSI(g) Design Press...
Houston, TXVisit Auction Website - Trusted SellerAuction
AUTOMATED BLOCK AND BLEED VALVES
AUTOMATED BLOCK AND BLEED VALVES, SKID MOUNTED, GAS FUEL, IECEx (411512449) (BOP-076-20454) (Located in Houston, TX)
Houston, TXVisit Auction Website - Trusted SellerAuction
AUTOMATED BLOCK AND BLEED VALVES
AUTOMATED BLOCK AND BLEED VALVES, SKID MOUNTED, GAS FUEL, IECEx (411512449) (BOP-076-20454) (Located in Houston, TX)
Houston, TXVisit Auction Website - Trusted SellerAuction
John Crane Indufil Type 89405293 Duplex Liquid Filter 60GPM
- Manufacturer: John Crane
John Crane Indufil Type 89405293 Duplex Liquid Filter 60GPM, Cartridge Type 87479165-EL, Minimum -20° F (-29° C) Maximum 212° F (100° C) Design Temperature, 3.17 USG (16.2 Bar (g), Volume, 235 PSI(g) Design Press...
Houston, TXVisit Auction Website - Trusted SellerAuction
John Crane Indufil Type 89405293 Duplex Liquid Filter 60GPM
- Manufacturer: John Crane
John Crane Indufil Type 89405293 Duplex Liquid Filter 60GPM, Cartridge Type 87479165-EL, Minimum -20° F (-29° C) Maximum 212° F (100° C) Design Temperature, 3.17 USG (16.2 Bar (g), Volume, 235 PSI(g) Design Press...
Houston, TXVisit Auction Website - Trusted SellerAuction
Never Used 2017 Sanco S.P.A Self Contained Fire Suppression Deluge Pumping System 1500 GPM Capacity
- Manufacturer: Sanco
Never used 2017 Sanco S.P.A Self-Contained Fire Suppression Deluge Pumping System, 1500 GPM capacity. Consists of Clarke 6-cylinder diesel fire pump, Metron Eledyne diesel fire pump controller, SPP TD15F 1500 GPM...
Houston, TXVisit Auction Website - Trusted Seller
1964 BARKER PM
- Manufacturer: Barker
- Model: PM
Note: All Specifications Subject to Verification Table size: 4" x 12" | T-slot: (1) 1/2" | Table longitudinal travel: 5" | Head vertical travel: 3" | Saddle cross travel: 3" | Spindle nose: 3C Collet Taper | Oad ...
Houston, TX 2022 Watson 1100CM
- Manufacturer: Watson
- Model: 1100CM
Low operating weight makes for high production in light-duty commercial, electrical and and residential drilling. - Like new! - Highly mobile at under 35,000 lbs operating weight, this is a rig made for high pr...
$435,000 USDDecatur, TX- Trusted SellerAuction
(H-210) Spark Arresting Muffler (UNUSED)
(H-210) Spark Arresting Muffler (UNUSED). Located In Yard# 8 - 14219 Westfair W Dr, Houston, TX 77041.
Houston, TXVisit Auction Website - Trusted SellerHouston, TX
- Trusted SellerAuction
(7x) U-Line Column Protectors, Model H-988, 10" Column ($10 Loading fee will be added to buyer's inv
(7x) U-Line Column Protectors, Model H-988, 10" Column ($10 Loading fee will be added to buyer's invoice)
Houston, TXVisit Auction Website DMG Mori DMU 80 Machining Center
- Manufacturer: DMG Mori
- Model: DMU 80
Good condition DMG Mori DMU 80 Machining Centers available between 2000 and 2013 years. Located in USA and other countries. Click request price for more information.
USA