Used Machine Tools in Utah, USA

S-SMART™ PM 13-15 (Used)

Used S-SMART™ PM 13-15 Automatic Pivot Type Single Miter Bandsaw with Standard Options. RMT Stock #2096 13″ x 15″ Flat Capacity Ø13″ Round Capacity The Revolution Machine Tools™ S-SMART™ PM 13-15 Automatic Pivot ...

40,000 Lb Welding Positioner

RMT Stock #1920 40,000lb Ransome welding positioner. 10ft x 10ft table. Center of gravity 12″ above table and 12″ eccentric. 360 degree table rotation. Pendant operator controls and adjustable tilt stop triggers....

Faccin HAV 3145 Plate Roll

• Manufacturer: Faccin-Biko
• Model: HAV

Faccin HAV 3145 Plate Roll (2017) with 2 top rolls. -17.7″ top roll has never been installed -Less than 100 hrs on this machine -Side and overhead supports Faccin HAV 3145 Plate Roll (2017) with 2 top rolls. -17....

Hugh Smith Vertical Bender 3000 Ton x 13′, up to 7.87″ Thickness

• Manufacturer: Hugh Smith

Hugh Smith Vertical Bender Heavy-duty metal bending, shaping, and pressing especially for shipbuilding, pressure vessels, and large-scale fabrication Stock #3668 Vertical Plate Bender / Vertical Press Roll Manufa...

12 Ton Wabash 12-1212-2TMB Heated Platen Molding Press

• Manufacturer: Wabash
• Model: 12-1212-2TMB

Wabash Heated 4-Post Platen Molding Press Model #: 12-1212-2TMB S/N: Specifications: Compression Tons: 12 Compression Cycl.: 5x6 Voltage: 460v - 3phase- 60hz Motor: 1.5HP Full load amps: 18 Platens at 20...

Pandjiris Seam Welder

• Manufacturer: Pandjiris

Pandjiris External Seam Weld Fixture RMT Stock #704 Pandjiris external seam weld fixture 44E 11-36

Williams and White Hydraulic Press

• Manufacturer: Williams - White

400 Ton Williams and White Hydraulic Press RMT Stock #2623 400 Ton Williams and White press – bed 68″ left to right – 54″ Front to back – Double Acting press -up to 40″ Draw Die spacing – 24″ Stroke – 38″ Dayligh...

HRB-4 2508 Plate Roll

RMT Stock #2907

Bentec BT-1000 Hydraulic Bender

• Manufacturer: BT

Used Bentec BT-1000 Hydraulic Bender Horizontal Press RMT Stock #2021 -11 Ton -12″ Stroke -1/2″ x 5″ Squares -Table Mounted V-Block -Die Table -Miscellaneous Dies -Built in 2007

Verson 200-HD2-72-4P 200T Modified Verson 4-Post Compression Press

• Manufacturer: Verson
• Capacity: 200,000 kilogram
• Stroke length: 1,371.6 millimeter

Specifications: - Capacity: 200T - Max Stroke: 54" - Daylight to bed: 26" Min - 80"Max - Bed area approx. 86" x 54" (RL x FB) - Distance Between Post: 74" 32" (RL x FB) - Usable Bed and ram area 74" x 54" (RL x ...

JMT Durma IW-90 Ironworker

• Manufacturer: Durma - Durmazlar
• Model: IW

JT Four International 400H Pipe Spinner

• Manufacturer: Spinner

JT Four International 400H Pipe Spinner Capable of spinning drill pipe and collars from 3 1/2 to 9 1/2 OD Air Pressure 90-125 psi Air consumption 250cfm Weight 780lbs Height 17.2" Length 55" Width 22.2" SALE PRIC...

2 Sheave McKissick 75 Ton Block

• Manufacturer: McKissick

2 Sheave McKissick 75 Ton Block 7/8" Cable