Used Saws

4" SOCO COLD SAW "NON FERROUS" Z22018

• used

• Manufacturer: Soco

4.36" ROUND CAPACITY TUBE 3.57" CAPACITY ROUND SOLID 6.94" X 1.98" SQUARE SOLID .238 - 23.80" FEED LINGTH CAN FEED 3 TIMES = 71.43" CUTTING SPEED INFINITELY ADJUSTABLE 14" DIAMETER BLADE 3500 RPM, 1500-4800 WITH ...

ERWTech/UCG High-Speed Flying Cold Saw, Double-Cut #New ERWTech Cold Saw Double Cut

• new

Our new cold saws are offered in both single and double-blade versions, accommodating sizes of up to 273 mm maximum outer diameter. With cutting speeds reaching up to 300 feet per minute (FPM), each saw is equipp...

7-1/4" SAVAGE ALUMINUM PLATE SAW 12037A

• used

• Manufacturer: Savage
• Model: WJS-20

MODEL #: WJS-20 SERIAL #: 88-261 7-1/4" MAX THICKNESS 24" BLADE DIAMETER 14' CUTTING LENGTH 9' FRONT BACK TRAVEL 14" VERTICAL HEAD TRAVEL TABLE ROTATES TO ALLOW MITER CUTTING 19'2" TABLE POWERED BLADE ELEVATION...

Hem Saw H101A Saw *USED / Tested / Cleaned / Painted* See Video

• used

• Manufacturer: Hem Saw

CS-350 Cold Saw, 14", Variable Speed

• new

• Manufacturer: Precision Matthews
• Model: CS-350
• Weight: 630 lb

Operates on 220V Single Phase Power VARIABLE BLADE SPEEDS for the best cutting speed to match the job from 24-120 RPM Quick Acting lever for angle changes, can be done in only a few seconds This saw has a 90 degr...

12" PACE TECHNOLOGIES MODEL MEGA-T3000S ABRASIVE SAW; S/N MT3-S-0923-010, 11" X 18"

• used

• Manufacturer: PACE

12" PACE TECHNOLOGIES MODEL MEGA-T3000S ABRASIVE SAW; S/N MT3-S-0923-010, 11" X 18" TABLE, SENTRY AIR DUST COLLECTOR

CS-315 Cold Saw, 12.5", Single Speed

• new

• Manufacturer: Precision Matthews
• Model: CS-315
• Weight: 415 lb

Operates on 220V Single Phase Power Quick Acting lever for angle changes, can be done in only a few seconds Quick Acting vise lever, for faster operation on multiple cuts of the same size Miters 45 degrees, both ...

CS-315V Cold Saw, 12.5", Variable Speed

• new

• Manufacturer: Precision Matthews
• Model: CS-315V
• Weight: 535 lb

Operates on 220V Single Phase Power Variable Speed from 15-120 RPMs allow user to dial in blade speed to the job for even better performance Quick Acting lever for angle changes, can be done in only a few seconds...

Matrix II Bi Metal Saw Blade, 8/12 TPI, 3/4x.035x93

• new

• Manufacturer: Precision Matthews
• Weight: 1 lb

Pre Welded, Sized to fit our PM-712G Band Saw, and many others Use this 8/12 tooth blade for general purpose cutting of many different shapes and sizes Variable blade pitch offers more efficient cutting action wi...

NEW FMS FCS-76-4 FLYING CUT-OFF COLD SAW; REF. NO. M1240

• new

• Manufacturer: Freedom

Model: FMS FCS-76-4 Cutting Type: Cold Saw Cutting Type, Leaves no or minimum burr at the tube end Hands of Operation: Dual Direction - Hand of Operation Line Center Level: To be determined Production Capability...

Matrix II Bi Metal Saw Blade, 6/10 TPI, 3/4x.035x93

• new

• Manufacturer: Precision Matthews
• Weight: 1 lb

Pre Welded, Sized to fit our PM-712G Band Saw, and many others Use this 6/10 tooth blade for thicker materials, solid rounds, solid rectangles, etc. Variable blade pitch offers more efficient cutting action with ...

Matrix II Bi Metal Saw Blade, 10/14 TPI, 3/4x.035x93

• new

• Manufacturer: Precision Matthews
• Weight: 1 lb

Pre Welded, Sized to fit our PM-712G Band Saw, and many others Use this 10/14 tooth blade for thinner wall materials, tubing, and structural shapes Variable blade pitch offers more efficient cutting action with l...

5 FMS FLYING CUT-OFF SAW

• used

SPECIFICATIONS EQUIPMENT SUMMARY Condition: As is.

DeWalt metal chop saw

• used

• Manufacturer: DeWalt

DeWalt metal chop saw