- Trusted Seller
NATIONAL MACHINERY 0-500
used
- Manufacturer: NATIONAL MACHINERY
Diameter: .086" - .190" (#2 thru #10) | Production: 250 - 500 PPM | Blank length maximum: 3" | Thread length (maximum): 3" | Electrics: 240V / 3 Phase | Approx. weight: 3,500 lbs | Approx. floor size: 5' x 6' | ...
Ivyland, PA - Trusted Seller
1984 WARREN INDUSTRIES WT-1000
used
- Manufacturer: Warren
- Model: WT-1000
Die requirement: "0" or "00" | Screw diameter capacity: #2 to #12 (1/4") | Speed range: 90 to 1000 PPM | Maximum blank length: Up to 3" | Die pocket depth: 3" | Approx. weight: 4500 lbs | Approx. floor size: 56"...
Ivyland, PA 
Ridgid #535 Pipe Threader 1/2'' - 2'' Capacity w/2x Die Heads and Dies on Stand
used
- Manufacturer: Ridgid
- Model: 535
Rigid #535 pipe threader 2x die heads w/dies 1/2" to 2" capacity on 4 leg stand 1/2 HP, 115 VOLTS, SINGLE PHASE
$1,950 USDCedarburg, WI
Toledo 1'' - 2'' Pipe Threader w/ Handle & Dies Model #7238
used
- Manufacturer: Toledo
Toledo Pipe Threading Die w/Handle 1''-2'' Die Head Size Dies Included Model #: 7238
$150 USDCedarburg, WI
4x - #161 DieHeads - Ridgid Receding Geared Pipe Threaders, 4'' to 6'' Diameter
used
- Manufacturer: Ridgid
- Model: 161
SET/GROUP OF 4x Ridgid Receding Geared Portable Pipe Threading DieHead Model #: 161 4" to 6" Size SELLING GROUP OF FOR UNITS TOGETHER FOR ONE MONEY!! Any extra components available will be included with purchase!!
$2,750 USDCedarburg, WI
Lot of 5 Unknown Brand Bolt & Pipe Dies
used
Lot of Unknown Brand Bolt & Pipe Die Threaders Max Bolt Size: 1 1/8'' NC Type Dies
$105 USDCedarburg, WI
Oster #502 Pipe Master 3/8" to 2" O.D. Pipe Threader w/Dies on Portable stand
used
- Manufacturer: Oster
Oster Pipe Master Portable Pipe threader on Stand Model #: 502 Capacity: 3/8 - 2" S/N: GM4813
$700 USDCedarburg, WI
Warner Linear Threaded Ball Screw 1'' Diameter, 44'' Overall Length
used
- Manufacturer: Warner Linear
Warner Linear Threaded Ball Screw 1'' Diameter 44'' Travel Length P/N: 66-402-C
$875 USDCedarburg, WI
Oster 4″ Pipe Threader
used
- Manufacturer: Oster
Return To: THREADER 400 Volt W/ several Die Heads S/N: 784-NS105 Good Condition
HyPneuMat Automatic Drilling and Tapping Unit : M200EHB
used
X – Y Table Pneumatic Vice 120 volt single phase Coolant pump and tank S/N: 25216 Good Condition
$1,750 USDRochester, NY- Trusted Seller
SPC FILEPECKER III 60 ELECTRIC PAPER DRILL 2.5 INCHES
used
- Manufacturer: SPC
Warranty Information This is a used item and has been checked for basic functionaly. Item includes a 30 day warranty. Unit is in mint shape. 115 Volts. 50/60Hz 246W Video Available!
$699 USDEl Paso, TX - Trusted Seller
UBT SERIES
new
MAGAZINE FEED U-BOLT BENDING MACHINES Die range: M6 - M24 | Part lengths: 80 -1000mm | Internal ubolt width: 20-250mm | Production speed: up to 50ppm
Vaughan, Canada 
25” GATOR 3 Jaw Chuck “ADJUST-TRU” #PA3-25”A 9.9" Bore #7624
used
- Manufacturer: Gator
25” GATOR 3 Jaw Chuck “ADJUST-TRU” #PA3-25”A #7624 Reference #7624 Model #PA-3-25”A Serial # 094823 Chuck diameter- 25” Bore- 9.92” Max R.P.M.- 1,000 Flatback Style for interchangeable mounting plates Current mou...
$3,450 USDSarasota, FL- Trusted Seller
Landis 12c Bolt & Rod Threader 1 1/2″ Capacity
used
- Manufacturer: Landis
- Model: 12C
Landis Model 12c Bolt & Rod Threader Serial # 12CP1B-05 Lanco 1 1/2″ Die Head 12R4992 Hardened Ways are in very good shape. Wired 230/460 3ph
- Trusted Seller
Waterbury Farrel #10 Flat Die Thread Roll 1/4″ Capacity
used
- Manufacturer: Waterbury Farrel
Waterbury Farrel #10 Flat Die Thread Roll 1/4″ Capacity
$4,950 USDFarmingdale, NJ
Tip: Enter manufacturer, model or keyword
