Used Lathes in Gunma, Japan

2004 Yamazaki Mazak INTEGREX200-III
- used
- Manufacturer: ヤマザキマザック
- Model: INTEGREX 200
If there is a difference between the content and the actual item, the actual item will be given priority.
Tatebayashi, Japan
Mori Seiki MS-850
- used
- Manufacturer: 森精機
If there is a difference between the content and the actual item, the actual item will be given priority.
Tatebayashi, Japan
1993 Mori Seiki MS-650
- used
- Manufacturer: 森精機
8-inch 3-jaw scroll chuck (Kitagawa/JN08RA6) 650 center spacing, 52 spindle through-holes, spindle speed 32-1800 rpm, with 2-axis digital scale.
Tatebayashi, Japan
1988 Takizawa TSL-550
- used
- Manufacturer: 滝沢
7-inch 3-jaw scroll chuck 550 rpm between centers Spindle speed 83-1800 rpm Spindle through-hole diameter 35 360 swing on bed 210 swing on reciprocating table If there is any difference between the contents and t...
Tatebayashi, Japan
1992 Chubu Koki CLL-1000
- used
- Manufacturer: 中部工機
If there is a difference between the content and the actual item, the actual item will be given priority.
Tatebayashi, Japan
1986 Mori Seiki MS-850
- used
- Manufacturer: 森精機
10-inch 3-jaw scroll chuck, spindle through-hole diameter 52, spindle speed 32-1800 rpm, center-to-center 850 Swing on bed 435 Swing on horizontal feed table 250 If there is any discrepancy between the contents a...
Tatebayashi, Japan
2007 Wasino LEO-80A
- used
- Manufacturer: ワシノ
10-inch 3-jaw scroll chuck (Kitagawa/JN10RA6) Spindle through-hole diameter 54, 800 between centers Spindle speed 25-2000 rpm Swing on bed 490 Swing on reciprocating table 260 If there is any difference between t...
Tatebayashi, Japan
1995 Wasino LR-55A
- used
- Manufacturer: ワシノ
7-inch 3-jaw scroll chuck 550 between centers Spindle speed 83-1800 rpm Spindle through-hole diameter 30 Swing on bed 360 Swing on reciprocating table 210 *The machine was used in a school.
Tatebayashi, Japan
1980 Wasino LE-19K
- used
- Manufacturer: ワシノ
12-inch 4-jaw scroll chuck Spindle through-hole diameter 54 800 between centers Spindle speed 50-1500 rpm Swing on bed 470 Swing on reciprocating table 240 If there is any discrepancy between the contents and the...
Tatebayashi, Japan
Yamazaki Mazak MAZAK JUNIOR
- used
- Manufacturer: Mazak
- Model: JUNIOR
9-inch 3-jaw scroll chuck Spindle through-hole diameter 52, center-to-center 850 Spindle speed 25-1500 rpm Swing on bed 460 Swing on reciprocating table 260 Swing on cut-off 640 If there is any difference between...
Tatebayashi, Japan
1987 Takizawa TSL-550
- used
- Manufacturer: 滝沢
7-inch 3-jaw scroll chuck 550 rpm between centers Spindle speed 83-1800 rpm Spindle through-hole diameter 35 Swing on bed 360 Swing on reciprocating table 210 *This machine was used in a school.
Tatebayashi, Japan
1989 Wasino LEO-80A
- used
- Manufacturer: ワシノ
9-inch 3-jaw scroll chuck, spindle through-hole diameter 54, center-to-center 800, spindle speed 25-2000 rpm If there is any discrepancy between the description and the actual product, the actual product will tak...
Tatebayashi, Japan
Ikegai ED-18
- used
- Manufacturer: 池貝
7-inch 3-jaw scroll chuck (Kitagawa/JN07) 900 between centers, spindle through-hole diameter 40, spindle speed 63-1600 rpm, swing 400 on bed, with 2-axis digital scale *This machine was used at school.
Tatebayashi, Japan
Mori Seiki MS-850
- used
- Manufacturer: 森精機
10-inch 3-jaw scroll chuck Spindle through-hole diameter 52, center-to-center 850 Spindle speed 32-1800 rpm Swing on bed 435 Swing on horizontal feed table 250 If there is any difference between the contents and ...
Tatebayashi, Japan
1997 Changun ST.
- used
- Manufacturer: 昌運
9-inch 3-jaw chuck, spindle speed 25-2000 rpm, 1000 rpm center-to-center, with 2-axis digital scale.
Tatebayashi, Japan