Used Unique in Canada

UNIQUE 4512 AUTOMATIC SHAPER (SHAPE AND SAND) [SF-280014]

• Manufacturer: Unique

UNIQUE 4500 Shape and Sand Machine General Description: -- Shaper Motor: (1) 10 HP Himmel Direct Drive -- Shaper Spindle: 1-1/4″ Mandrel, 5″ Stack Height. Compressed Air Requirements: 90 PSI – 2...

2003 UNIQUE 313 AUTOMATIC SHAPER (COPE & BORE) [SA-010954]

• Manufacturer: Unique
• Model: 313

UNIQUE - 313, ...Automatic Cope & Dowel Door Machine Miters the end & drills for dowels of (2) cabinet door rails on each pass; automatic cycle for accurate & easy alignment of mitered corners. Equipped with: -- ...

2004 UNIQUE 336-4 AUTOMATIC SHAPER (SHAPE & SAND) [SF-010063]

• Manufacturer: Unique

UNIQUE 336-4 4-Station Automatic Feed Through Shape & Sand Machine Specifications: -- Max. material thickness 2-1/2", Min. material width 1-1/2" plus depth of cut. -- Variable feed speeds 0 - 35 FPM. 1st & 2nd Sh...

UNIQUE 313

• Manufacturer: Unique
• Model: 313
• Phase type: Three-phase

Voltage: 230 volts | Phase: 3-phase | Material thickness capacity: 1" | Max. material width: 4" | Max. cutter diameter: 5" | Shaper motors: 5 hp | Drill motor: 1/3 hp

Unique 310 GT Cope Machine

Specification 16 HP 66.5 A 480 V (transformers are available for any voltage) 3 Phase

Unique 311-40 Double Cope Machine

Specifications 230 V 3 Phase 40″ Max length. 1.25″ Spindles

1965 UNIQUE POLISHING S-5937

• Manufacturer: Unique

MACHINE FULLY REFUBISHED 2007, NEW ELECTRICAL, GEAR BOX REBUILD, REWOUND DRIVE MOTORS, AND BEARINGS. USED FOR VERY LITTLE FOR 3 YEARS THEN PUT INTO DRY STORAGE.