- Trusted SellerAuction
VERMEER CTX100 MINI SKIDSTEER
- Manufacturer: Vermeer
- Model: CTX100
- Horsepower: 40 hp
- Lifting capacity: 469.5 kg
As Is, Where Is Vermeer CTX 100 mini skid steer. This unit starts runs and operates exactly as it should. Within the last 50 hours we have went through and replaced pretty much the whole hydraulic system includin...
Lewisburg, TNVisit Auction Website - Trusted Seller
2017 Vermeer RTX750 RockSaw
- Manufacturer: Vermeer
- Model: RTX750
- Horsepower: 74 hp
- Hours: 1,350 h
2017 RTX750 74 HP Deutz Diesel Engine, +/- 1,350 Hours. RW732 Rockwheel with 5" Segments, Hard Foam Filled tires. This Machine has been Inspected, Serviced & Repaired by a Vermeer Factory Trained Technician an...
- Trusted SellerBuy Now
VERMEER CTX100 MINI SKIDSTEER
- Manufacturer: Vermeer
- Model: CTX100
- Horsepower: 40 hp
- Lifting capacity: 469.5 kg
Vermeer CTX 100 mini skid steer. This unit starts runs and operates exactly as it should. Within the last 50 hours we have went through and replaced pretty much the whole hydraulic system including a $5000 pump b...
2008 VERMEER RTX1250
- Manufacturer: Vermeer
- Model: RTX1250
- Horsepower: 127 hp
- Operating weight: 5,252.6 kg
Bucket18in, Blade 6ft 8in, Saw head is a Hydra Wheel Saw, 4in plate cuts 6in wide, 40in Cutting Depth, 12 Cutting Plates, Track 18in wide
2006 VERMEER RT650
- Manufacturer: Vermeer
- Model: RT650
- Horsepower: 76 hp
- Operating weight: 2,993.71 kg
Good running, working unit
2015 VERMEER PTX44
- Manufacturer: Vermeer
- Model: PTX44
- Hours: 1,284 h
JOB READY Very Low Hour Machine. Hours: 1,284
Bartlett, TN
2012 VERMEER NAVIGATOR D20X22 SERIES II
- Manufacturer: Vermeer
- Model: Navigator D20X22 Series II
- Horsepower: 83 hp
- Hours: 2,600 h
40 used rods. Work ready machine Hours: 2,600
2011 VERMEER NAVIGATOR D80X100 SERIES II
- Manufacturer: Vermeer
- Model: Navigator D80X100 Series II
- Horsepower: 180 hp
- Hours: 5,080 h
71 Rods 20Ft long with Basket Hours: 5,080 | Dual rod: Yes
2016 VERMEER NAVIGATOR D23X30 S3
- Manufacturer: Vermeer
- Model: Navigator D23X30
- Horsepower: 100 hp
- Hours: 4,300 h
Full rack of drill pipe. Good running, working unit
2006 VERMEER NAVIGATOR D7X11 SERIES II
- Manufacturer: Vermeer
- Model: Navigator D7X11 Series II
- Horsepower: 47 hp
- Hours: 2,400 h
30 used rods. Work ready machine. Hours: 2,400
2010 VERMEER NAVIGATOR D20X22FX SERIES II
- Manufacturer: Vermeer
- Model: Navigator D20X22
- Horsepower: 74 hp
- Hours: 1,300 h
Full rack of pipe. Machine runs and works as it should.
2020 Vermeer SC70TX
- Manufacturer: Vermeer
- Model: SC70TX
- Horsepower: 131 hp
- Fuel capacity: 170.34 L
2020 Vermeer SC70TX Tracked Stump Grinder The last reported number of hours was 1050. Hours and condition are captured at the time of listing and are subject to change. Please contact a representative about this ...
2012 VERMEER T655 COMMANDER III
- Manufacturer: Vermeer
- Model: T655 Commander III
- Hours: 3,586 h
Just off a job good running, Deere engine, 8ft deep cut, 18in wide cut for rock, 12in cut for dirt
2020 VERMEER NAVIGATOR D60X90 SERIES III
- Manufacturer: Vermeer
- Model: Navigator D60X90 Series III
- Horsepower: 202 hp
- Hours: 3,173 h
CAB WITH AIR, 15ft rods with 41 rode on the unit Hours: 3,173 | Track type: Rubber
Vermeer Navigator D20X22 Directional Drilling
- Manufacturer: Vermeer
- Model: Navigator D20X22
Good condition Vermeer Navigator D20X22 Directional Drilling manufactured in 2007. Located in USA and other countries. Click request price for more information.
USAVermeer Navigator D7X11 Series II Directional Drilling
- Manufacturer: Vermeer
- Model: Navigator D7X11 Series II
Good condition Vermeer Navigator D7X11 Series II Directional Drilling manufactured in 2008. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword