Processing » Vibratory Separators

Building Filters

281

Used size

  • Trusted Seller
    SWECO PH46Y30 PHARMASEP

    SWECO PH46Y30 PHARMASEP

    • Manufacturer: Sweco

    Used- Sweco PharmASep Vibro-Energy Filter Dryer, Model PH46Y30, 316L Stainless Steel. Sanitary design rated 0-2 bar (0-30 psi), vacuum -1 bar (-15 psi). Batch processing capacity solids up to 25kg (55 pounds). Ab...

    Oldmans Township, NJ
  • Trusted Seller
    Deister 4′ x 10′ Double-Deck

    Deister 4′ x 10′ Double-Deck Screen – RAP-16878

    • Manufacturer: Deister

    Description Deister 4′ x 10′ Double-Deck Screen Model Yr. 1993 Air operated chutes Overflow chute

    Shelbyville, KY
  • Trusted Seller
    Screen, Sweco, 48", S/St, Screens

    Screen, Sweco, 48", S/St, Screens Only, Various Sizes (2) #S744370

    • Manufacturer: Sweco

    (2) Stainless Steel Replacement Screens, 48” Diameter - For Sweco and Midwestern screeners in assorted sizes. Provides fine-to-coarse screening for various applications in 48” diameter systems.

    San Dimas, CA
  • Trusted Seller
    SWECO VIBRATORY MILL - MODEL

    SWECO VIBRATORY MILL - MODEL DM-3 - URETHANE LINED

    • Manufacturer: Sweco

    1 - used Sweco Vibratory Mill, model DM-3 One (1) used 3 cu. ft. Sweco Vibratory Mill Model: DM-3 Serial number: 564-8 Urethane lined Alumina media included Top cover with access port included Approximatel...

    USA
  • Sweco FMD-10HA

    Sweco FMD-10HA

    • Manufacturer: Sweco
    • Model: FMD-10HA

    Time-tested technology provides three-dimensional Vibro-Energy motion for all SWECO Finishing Mills. This motion subjects parts and media to a consistent high-frequency tilting movement as they travel in a helica...

    Plymouth, MN
  • 7 Cubic Foot Sweco FMD7LR

    7 Cubic Foot Sweco FMD7LR Bowl ONLY

    • Manufacturer: Sweco

    This listing is for the bowl only. Great if your bowl or liner needs replacing. 48” round Channel is 13” wide Depth 13” Liner in good shape

    Watertown, CT
  • Trusted Seller
    SWECO FM-3HA #86816

    SWECO FM-3HA #86816

    • Manufacturer: Sweco

    Chamber size: 3 cubic-feet | Power: 1.25 horsepower | Bowl dimensions: 32 inches | Electric: 230V/460V/3Ph/60Hz

    Ames, IA
  • Trusted Seller
    B-57

    B-57

    • Manufacturer: Giant Finishing

    1 gallon jug of A mildly acidic liquid burnishing compound with inhibitor for use with vibratory finishing equipment. Low foaming in most applications, it maintains steel burnishing media in a highly reflective, ...

    $43 USD
    Addison, TX
  • Trusted Seller
    B-57

    B-57

    • Manufacturer: Giant Finishing

    5 gallon pail of A mildly acidic liquid burnishing compound with inhibitor for use with vibratory finishing equipment. Low foaming in most applications, it maintains steel burnishing media in a highly reflective,...

    $145 USD
    Addison, TX
  • Sweco 60” Vibro-Energy Separator –

    Sweco 60” Vibro-Energy Separator – Stainless Steel, Model US60S88

    • Manufacturer: Sweco
    • Model: US60S88

    53529001 Used Sweco 60" diameter Vibro-Energy Separator, Model US60S88, Stainless Steel. Single deck, single separation. Missing top frame. Driven by 2.5hp 3/60/230/460 volt, 1160rpm motor. Mounted on stainless s...

    Belvidere, IL
  • Sweco 30" Diameter Model M-30-10-95

    Sweco 30" Diameter Model M-30-10-95 Stainless Steel Screener

    • Manufacturer: Sweco

    53672002 Used Sweco 30" Diameter Screener, Model M-30-10-95, Stainless Steel. Single deck, two separation. 6" Diameter outlets. Driven by a 1/2hp, 3/60/230 volt, 1140rpm motor. Includes control panel. Base mounte...

    $4,200 USD
    Belvidere, IL
  • Macon 30" Diameter Single Deck

    Macon 30" Diameter Single Deck Stainless Steel Screener

    • Manufacturer: MaconMacon

    51708014 Used Macon Screener, 30" Diameter, 304 Stainless Steel. Single deck, 2 separation. No screen. Top clamp-on cover with 8" center inlet. Driven by a approximate 1/2hp, 3/60/460 volt, 1140 rpm motor. Mounte...

    $3,836 USD
    Belvidere, IL
  • Sweco Model ZS24S444P3WC 24" Diameter

    Sweco Model ZS24S444P3WC 24" Diameter Vibro-Energy Stainless Steel Separator

    • Manufacturer: Sweco
    • Model: ZS24

    53401001 Used Sweco Approximately 24" Vibro-Energy Separator, Model ZS24S444P3WC, 304 Stainless Steel. Double Deck, 3 Separation. Approximately 24" diameter screen. Driven by a .33hp 3/60/208/230v 1140rpm motor. ...

    Belvidere, IL
  • Trusted Seller
    855-B

    855-B

    • Manufacturer: Giant Finishing

    55 gallon drum of Mildly acidic, liquid burnishing compound with inhibitor for use with vibratory finishing equipment. Low foaming in most applications, it maintains steel burnishing media in a highly reflective,...

    $990 USD
    Addison, TX
  • Sweco US48D815

    Sweco US48D815

    • Manufacturer: Sweco
    • Model: US48D815

    Sweco VibratoryScreen; Size 48 in. Model US48D815; SerialNumber CU18978C; Motor: HP 2.5, Rpm 1160, Volts 575

    Cypress, TX
12345

Overview

Vibratory separators are industrial machines used for separating materials by particle size through vibration. These versatile devices are commonly used in various industries, including food processing, pharmaceuticals, and chemical manufacturing, to ensure product purity and consistency. They can handle a wide range of materials, from fine powders to larger granules, making them essential for quality control and material handling processes.

FAQ

What factors should I consider when buying a used vibratory separator?

Consider the machine's age, condition, capacity, and whether it meets your specific material separation needs. Check for any signs of wear and tear and ensure it comes with necessary accessories and parts.

How can I ensure safe shipping for a vibratory separator?

Use a trusted shipping service that specializes in heavy machinery. Make sure the separator is properly secured and protected with appropriate packaging to prevent damage during transit.

What is the maintenance schedule for a vibratory separator?

Regular maintenance should include checking and tightening bolts, inspecting screens and gaskets, lubricating moving parts, and cleaning the machine to prevent material buildup. Refer to the manufacturer’s manual for detailed maintenance instructions.