Used solution

MyData Mycronic L-012-0023C C12 Nozzle 0.5mm ID

• Manufacturer: Mycronic

MYCRONIC NOZZLES LIST Mydata TOOL H01(white)OD=1.2mm ID=0.5mm Mydata TOOL H01(yellow)OD=1.5mm ID=0.7mm Mydata TOOL H01(red)OD=3.0mm ID=1.0mm MYDATA A12 Nozzle MYDATA A13 Nozzle MYDATA A14 Nozzle MYDATA H01 Nozzle...

Mycronic MyData H05 Nozzle L-012-0824

• Manufacturer: Mycronic

MYCRONIC NOZZLES LIST Mydata TOOL H01(white)OD=1.2mm ID=0.5mm Mydata TOOL H01(yellow)OD=1.5mm ID=0.7mm Mydata TOOL H01(red)OD=3.0mm ID=1.0mm MYDATA A12 Nozzle MYDATA A13 Nozzle MYDATA A14 Nozzle MYDATA H01 Nozzle...

Mycronic MyData H04 Nozzle L-012-0576

• Manufacturer: Mycronic

H04 Nozzle MYCRONIC NOZZLES LIST Mydata TOOL H01(white)OD=1.2mm ID=0.5mm Mydata TOOL H01(yellow)OD=1.5mm ID=0.7mm Mydata TOOL H01(red)OD=3.0mm ID=1.0mm MYDATA A12 Nozzle MYDATA A13 Nozzle MYDATA A14 Nozzle MYDATA...

Mycronic MyData H02 Nozzle L-012-0534B

• Manufacturer: Mycronic

MYCRONIC NOZZLES LIST Mydata TOOL H01(white)OD=1.2mm ID=0.5mm Mydata TOOL H01(yellow)OD=1.5mm ID=0.7mm Mydata TOOL H01(red)OD=3.0mm ID=1.0mm MYDATA A12 Nozzle MYDATA A13 Nozzle MYDATA A14 Nozzle MYDATA H01 Nozzle...

Mycronic MyData A13 Nozzle L-012-0012E

• Manufacturer: Mycronic

MYCRONIC NOZZLES LIST Mydata TOOL H01(white)OD=1.2mm ID=0.5mm Mydata TOOL H01(yellow)OD=1.5mm ID=0.7mm Mydata TOOL H01(red)OD=3.0mm ID=1.0mm MYDATA A12 Nozzle MYDATA A13 Nozzle MYDATA A14 Nozzle MYDATA H01 Nozzle...

Automatic Taping Machine/Test Taping Integrated Machine

Accurate positioning mechanism, low noise and sensitive response; Optional marking test and visual inspection station; Optional test and classification station; Automatic troubleshooting, automatic tape cutting, ...

IR4100 Infrared BGA and SMD Rework Station

Maximum/Minimum PCB Size：Maximum: 610mm x 610mm (24” x 24”); Minimum: N/A Ultra-High Precision Placement Capability High Sensitivity Vacuum Pick Sodr-Cam Reflow Camera Height Adjustable Bottom-Side Preheater High...

HIOKI FA1817 Flying Probe Tester

• Manufacturer: Hioki

Detect Latent Defects on High-Density Printed Wiring Boards with Absolute Reliability The FA1817 is a fixtureless, dual-sided, bare board tester that provides superior cost performance and quick inspection yield ...

IR3100 Infrared BGA Rework Station

Maximum/Minimum PCB Size Maximum：305mm x 305mm (12” x 12”); Minimum: N/A arms close down completely. Maximum/Minimum Component Size Maximum：65mm (2.5”) x 65mm (2.5”); Minimum: 1mm Sq. Ultra-High Precision Placeme...

Hitachi HITACHI GXH-3J Pick and Place Machine

• Manufacturer: Hitachi
• Model: GXH3

A placement system with the ludicrous placement rate of 12000CPH. and flexibility to place components ranging from 0201(0603mm) chip to 100x26mm connector. Two independent work cells (stages) allow simultaneous...

FUJI CP642E Pick and place machine

• Manufacturer: Fuji
• Model: CP642E

PCB dimensions Max: 457mm x 356mm Min: 80mm x 60mm Placing rate 0.09 sec./component - 40,000 CPH Accuracy ± 0.01mm (3 s) Applicable components 0402 to 19 x 20mm Component capacity Up to 140 types (8mm tape) Placi...

ASM SIPLACE D3 Pick and place machine

• Manufacturer: ASMPT

Technical data: Performance Theoretical value up to 61,000CPH IPC value up to 37,600CPH Accuracy ±22μm,±0.05ﾟ@3 PCB size Single rail transmission 50 x 50 to 610 x 508mm Dual rail transmission 50 x 50 to 610 x 430...

Hanwha/Samsung SM Feeder 24mm 32mm 44mm 56mm for SMT SM320/SM321/SM421/SM471

• Manufacturer: Hanwha

Samsung SM Feeder 24mm 32mm 44mm 56mm for Samsung SMT machines Samsung SM Feeder is used for Samsung SMT pick and place machines such as SM310, SM320, SM321/321S, SM421/421S, SM411, SM431, SM471, SM481, SM482, DE...

Hanwha/Samsung SM Feeder 8 2mm 8 4mm 8mm 12mm 16mm for Samsung SMT machines

• Manufacturer: Hanwha

Samsung SM Feeder 8*2mm 8*4mm 8mm 12mm 16mm for SM320/SM321/SM421/SM471/SM48 Samsung SM Feeder is used for Samsung SMT pick and place machines such as SM310, SM320, SM321/321S, SM421/421S, SM411, SM431, SM471, SM...