Used Processing in Kansas, USA

LS Industries - Blast Wheel - LS Turboshot™

• new

• Manufacturer: LS Industries

The LS TurboShot™ wheel is designed for easy maintenance. Features: - The impeller can be serviced or completely replaced without removing the motor - Most components of the impeller can be repaired, replaced o...

LS Industries - Tumble Blasters - 17B

• new

• Manufacturer: LS Industries

The 17B is designed to efficiently and effectively remove dirt, dust, rust, and other debris with a full 360-degree blast. Features: - Heavy-duty steel construction - 0.25" manganese liners in all direct shot p...

LS Industries - Rubber Tumbler Belt Blaster - 1.25-RTB

• new

• Manufacturer: LS Industries

The RTB-1.25 is designed to clean parts with abrasive shot while gently tumbling the parts to ensure no damage. Features: - Side air wash - Shot hopper with high/low shot sensor - Small operating footprint - Co...

LS Industries - Tumble Blasters - 7B

• new

• Manufacturer: LS Industries

The 7B is designed to efficiently and effectively removes dirt, dust, rust, and other debris with a full 360-degree blast. Features: - Heavy-duty steel construction - 0.25" manganese liners in all direct shot p...

LS Industries - Drum Blaster - LSDB-25

• new

• Manufacturer: LS Industries

The LSDB-25 Drum Blaster is a quick and efficient machine for cleaning burnt steel drums and barrels. The DB25 can blast the outside and inside of open-end drums in under 2 minutes. The blaster is built with a he...

LS Industries - Spinner Hanger Blaster - Y-Track

• new

• Manufacturer: Spinner

LS Industries - Y-Track Blaster - YT-23x43

• new

• Manufacturer: LS Industries

The YT-23x43 is designed to remove rust, dust, dirt, and other debris on parts on a monorail system to get a 360-degree blast. Features: - The Y track increases productivity by allowing one arm to be loaded whi...

LS Industries - Wire Mesh Belt Blaster - MBB-60×24

• new

• Manufacturer: LS Industries

The MBB-60×24 is designed to remove rust, dust, dirt, and other debris off parts while getting carried through the machine on a wire mesh belt. Features: - The LS SureShot™ blast wheels are set in a straight pa...

LS Industries Stainless Steel Parts Washer

• refurbished

• Manufacturer: Unknown

The LS Industries Stainless Steel washer is a heavy-duty washer with a 2,500lb turntable capacity. The table is mounted to the door for easy access to the parts as they are loaded and unloaded. It is also possibl...

LS Industries - Flow Through Washer - 30×24-FTW (3-Stage)

• new

• Manufacturer: LS Industries

The 30x24-FTW cleans oil, grease, grime, and other contaminants on industrial arts or cylinders by simply loading them on the conveyor belt. Features: - Insulated wash tank - Filter debris screen - 24" w convey...

LS Industries - Pipe Blaster - OD-PB 0.5-24

• new

• Manufacturer: LS Industries

The OD Pipe Blaster PB0.5-24 is designed to blast the outside surface of pipe from 0.5” to 24” in diameter Features: - The LS TurboShot™ blast wheels are gravity fed which keeps the machine compact and easy to ...

LS Industries - Blast Wheel - Direct Drive 10″ Wheel

• new

• Manufacturer: LS Industries

The LS Gravity fed 10” Direct Drive Blast Wheel is designed for long life, optimum performance, versatility and simple maintenance. Features: - Capable of throwing abrasive at 240 feet per second - The blades a...

LS Industries - Floor Blaster - LSFB-39

• new

• Manufacturer: LS Industries

The LSFB-39 is a walk behind system that allows the media to strike the surface and rebounds along with removed contaminants into a recovery chamber. Features: - High performance, airless centrifugal wheel for ...

LS Industries - Cylinder Blaster - BSC-20

• new

• Manufacturer: LS Industries

The BSC-20 is small footprint Cylinder Blaster that is able to remove rust, dust, dirt, and other debris. Features: - Replaceable cabinet liners - Lift table - Automatic kick-out bar

LS Industries - Balancer - XLX-TC

• new

• Manufacturer: LS Industries

The XLX-TC is designed to balance small rotating assemblies like turbochargers. Balanced component will last longer and operate more effectively due to les stress.