- Trusted Seller
End module from Wago - 750-600 31304
- Manufacturer: Wago
Fieldbus, Profibus, PLC controller, automation technology, controllers and regulators, end module, fieldbus controller, PLC terminal
Wiefelstede, Germany - Trusted Seller
Digital input terminal from Wago - 750-400 31305
- Manufacturer: Wago
Fieldbus, Profibus, PLC control, automation technology, controllers and regulators, end module, fieldbus controller, PLC terminal, digital input terminal
Wiefelstede, Germany - Trusted Seller
Digital input terminal block 3 pieces from Wago – 750-402 35997
- Manufacturer: Wago
- Model: 750-402
Fieldbus, Profibus, PLC control, automation technology, controllers and regulators, end module, fieldbus controller, PLC terminal, digital input terminal
Wiefelstede, Germany 
Wago Industrial ECO switch 8 ports 100Base-TX 852-112
- Manufacturer: Wago
second-hand Industrial ECO switch; 8 ports 100Base-TX; black Switching mode store-and-forward; non-blocking Number of 100 Mbit/s ports 8 Communication standards IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802...
Freiberg, Germany
WAGO 2006-404
- Manufacturer: Wago
WAGO unused 2006-404 Comb jumper 4-way; insulated; light gray 50 pcs per package
Freiberg, Germany
Wago 750-1405
- Manufacturer: Wago
Wago unused stock item WAGO I/O System 750/753Art. no. 750-1405 16-channel digital input; DC 24 V; 3 ms The digital input module has 16 channels with a width of only 12 mm. It records binary control signals from ...
Freiberg, Germany
WAGO 750-602
- Manufacturer: Wago
750-602 used Feeding of potential; DC 24 V The feed-through terminal is used to supply the bus terminals with the respective supply potential. The maximum current that may flow through the feed-through terminal i...
Freiberg, Germany
Wago 750-333
- Manufacturer: Wago
Wago unused stock Fieldbus couplers PROFIBUS DP; 2nd generation; 12 MBd PROFIBUS communication Number of fieldbus nodes on the master max. 96 Number of I/O points 6,000 Transmission rate 9.6 kBd … 12 MBd Bus segm...
Freiberg, Germany
Wago 750-614
- Manufacturer: Wago
Potential multiplication The potential multiplier terminal is used for multiple tapping of the supply voltage. This bus terminal makes the use of additional terminal blocks superfluous.
Freiberg, Germany
WAGO 750-304
- Manufacturer: Wago
WAGO used Fieldbus coupler Interbus with: 750-403 x 2 (4-channel digital inputs) 750-504 x 1 (4-channel digital outputs) 750-467 x 1 (2-channel analog inputs) 750-550 x 1 (2-channel analog outputs) 750-600 x 1 (e...
Freiberg, Germany
WAGO 750-304 (g)
- Manufacturer: Wago
used WAGO I/O System 750/753Art. no. 750-304 INTERBUS fieldbus coupler This fieldbus coupler connects the WAGO-I/O-SYSTEM as a slave with the INTERBUS as a remote bus participant. The bus coupler recognizes all p...
Freiberg, Germany
WAGO 750-431 (g)
- Manufacturer: Wago
used WAGO I/O System 750/753Art. no. 750-431 8-channel digital input; DC 24 V; 0.2 ms The digital input module has 8 channels with a width of only 12 mm. It records control signals from the field, e.g. via sensor...
Freiberg, Germany
WAGO 750-530 (g)
- Manufacturer: Wago
used WAGO I/O System 750/753Art. no. 750-530 8-channel digital output; DC 24 V; 0.5 A The digital output module has 8 channels with a width of only 12 mm. The module is used to transmit control signals from the a...
Freiberg, Germany
WAGO 750-600g
- Manufacturer: Wago
750-600 used At the end of a fieldbus node, an end terminal must be installed. The end terminal closes the internal terminal bus and guarantees proper data transmission.
Freiberg, Germany
Wago end module 750-600
- Manufacturer: Wago
End module An end module must be set at the end of each fieldbus node. The end terminal closes the internal terminal bus and guarantees proper data transmission.
Freiberg, Germany
Tip: Enter manufacturer, model or keyword