Used Warner & Swasey Turret Lathes

Warner & Swasey No.3/m-1200 Turret Lathe

• used

• Manufacturer: Warner & Swasey

Made In Usa, 2" Bore Name: Warner & Swasey No.3/m-1200 Turret Lathe | Arrival date: 07-11-2025 | Dimensions l x w x h (inches): 101 x 59 x 57 | Capacity: 12" | Weight (lb.): 3645 | Available quantity: 1

WARNER & SWASEY 4A

• used

• Manufacturer: Warner & Swasey
• Model: 4A

Square head w/hydraulic preselector 24" Dia KCM 3 Jaw Chuck with 7" Bore Rapid traverse both aprons Maximum swing over ways 28-1/4" Maximum swing over carriage 22-7/16" Maximum distance from spindle to turret f...

WARNER & SWASEY M1420

• used

• Manufacturer: Warner & Swasey
• Model: M1420

NO 4 W&S TURRET LATHE WITH PRESELECT SPINDLE SPEEDS 2 SPEED MAIN MOTOR Approximate Swing Over Bed 17" Spindle Bore 2.425" 3 JAW CHUCK 4JAW CHUCK 4 WAY SQUARE TOOLPOST SPINDLE SPEEDS 30 - 1532 RPM COOLANT SYSTEM...

WARNER & SWASEY 1-A #1227324

• used

• Manufacturer: Warner & Swasey
• Model: 1A

1969 WARNER & SWASEY 1A M-3400 #0550225

• used

• Manufacturer: Warner & Swasey
• Model: 1A M3400

LEAD ON THREADING BAR FEED 6-POSITION TURRET CARRIAGE STOP 2 ADJUSTABLE TOOL HOLDERS 4 FLANGE TOOL HOLDERS RAPID TRAVERSE COOLANT WITH CHIP PAN F

WARNER & SWASEY 3A (M-3500) SQUARE HEAD #0345325

• used

• Manufacturer: Warner & Swasey
• Model: 3A M3500

Swing over bed: 24-1/2" | Swing over carriage horn: 18" | Spindle nose to turret: 58-3/4" | Spindle hole: 6-1/8" | Spindle speeds: (32) 12 TO 851 RPM | Chuck: 21" 3 JAW | Power chuck wrench: YES | Carriage longi...

Warner & Swasey 4A Square Head Saddle Type Turret Lathe w/ 9-1/2” Hole

• used

• Manufacturer: Warner & Swasey
• Model: 4A M3580

Unit is USED and in VERY GOOD CONDITION. Unit has been powered and tested at the facility. Unit is being sold AS-IS, WHERE-IS, AS-SHOWN. Pictures are of the actual unit being purchased. If the buyer has any quest...

#3 WARNER & SWASEY TURRET LATHE

• used

• Manufacturer: Warner & Swasey
• Model: NO 3

#3 WARNER & SWASEY TURRET LATHE PRICE: Loaded on Truck, Our Warehouse, York, PA …… $1,950.00 AS IS HMC Stock # 25015-P Machine Serial No.: 1034178 Machine Model No.: M-1200 Swing Over Ways: 15" Swing Over C...

Warner & Swasey 2A Square Head Saddle Type Turret Lathe w/ 3-3/4” Hole

• used

• Manufacturer: Warner & Swasey
• Model: 2A

Unit is USED and in VERY GOOD CONDITION. Unit has been powered and tested at the facility. Unit is being sold AS-IS, WHERE-IS, AS-SHOWN. Pictures are of the actual unit being purchased. If the buyer has any quest...

1969 2A WARNER & SWASEY Saddle Type Turret Lathe

• used

• Manufacturer: Warner & Swasey
• Model: 2A

Size: 2A

1966 WARNER & SWASEY M3500

• used

• Manufacturer: Warner & Swasey
• Model: M3500

ONE USED - 3A WARNER & SWASEY Extended Bed Saddle Type Turret Lathe 24” Swing over Bedways Hardways 6.25” Hole thru Spindle 88” Distance Chuck Face to Turret Cross Sliding Turret 21” Diameter 3-Jaw Chuck P...

1967 WARNER & SWASEY M4670

• used

• Manufacturer: Warner & Swasey
• Model: M4670

ONE USED - #5 WARNER & SWASEY Ram Type Turret Lathe 20” Swing Hardways Spindle Speeds from 25 to 1000 RPM 4.5” Spindle thru Hole Misc. Turret Tooling 3 Slide Toolholders 2 Flange Toolholders Mulitple Toolholder ...

1935 Warner & Swasey 4A M-3550

• used

• Manufacturer: Warner & Swasey
• Model: 4A M3550

Equipped With: Cross Sliding Rear Turret Coolant Tool Post 4 Way On Front Rapid Traverse Front & Rear Carriages 24″ Chuck, Power Rapid Traverse, 15″ Type Spindle Nos