- Trusted Seller
2025 WDM 310-3-48
- Manufacturer: WDM
14 inches Machine type: Plate Rolls | Capacity: 4′ x 18 Ga. | Machine location: West Virginia | Stock #: 754063 | Diameter of rolls: 3 | Rolling speed: 20 FPM | – minimum rolling diameter: Approximately | – motor...
- Trusted Seller
2025 WDM 430-6-5
- Manufacturer: WDM
Machine type: Plate Rolls | Capacity: 0.25” x ‘ | Machine location: Upon Request | Stock #: 515677 | Passive crown system: Automatically compensates for roll deflection—from thin sheets up to 1/4″ plate—without ...
- Trusted Seller
2025 WDM 403-10-8
- Manufacturer: WDM
Safety & Construction: NEMA 12 electrical cabinet, NFPA 79 compliance SKF spherical bearings Safety cable perimeter, hydraulic drop‑end support Other add ons available
- Trusted Seller
2025 WDM 310-3-36
- Manufacturer: WDM
12 inches Machine type: Plate Rolls | Capacity: 3′ x 14 Ga. | Machine location: Iowa | Stock #: 882446 | Diameter of rolls: 3 | Rolling speed: 20 FPM | – minimum rolling diameter: Approximately | – motor: Electri...
- Trusted Seller
2010 WDM AR-41
- Manufacturer: WDM
- Model: AR-41
WDM AR-41 angle bending rolls, 2010 model, features robust steel construction and precision-machined components. Equipped with AR-520 pendent control, universal die set, and 3-way hydraulic guide rolls. Operates ...
Warren, MI - Trusted Seller
2008 WDM B-2.6-48
- Manufacturer: WDM
- Model: B-26-48
Used 2008 WDM Model B-2.6-48 plate roll: 4' capacity with 20 gauge max thickness, featuring a 3-roll initial pinch design. Equipped with powered bending roll, LED position readout, and hydraulic motor for efficie...
Warren, MI 
WDM 4 ROLL DOUBLE PINCH
- Manufacturer: WDM
- Model: 4-Roll
The 403 Series 4-roll double pinch plate bending machine is in a sense a 3-roll initial pinch plate bending machine with an extra bending roll on the front side of the pinch rolls. The advantage of this type of m...
Cuddy, PA
WDM 3 ROLL INITIAL PINCH B SERIES
- Manufacturer: WDM
The WDM B Series machines are built primarily for the sheet metal industry and small maintenance shops. To keep their cost low, the basic machine has few extras, although it does have the main WDM features of rob...
Cuddy, PA- Trusted Seller
WDM 310-6-72 #86087
- Manufacturer: WDM
FEATURES: • All gear drive • Sealed ball & roller bearings on all rolls and idler gears • Unique all electric drive via gear motors • Infinitely variable speed via variable frequency drives • No Hydraulics • 30% ...
Ames, IA - Trusted Seller
WDM 403-6-5 #50621
- Manufacturer: WDM
- Model: 403-6-5
SPECIFICATIONS: FEATURES: • Automatic compensation for roll deflection creating the following features: o No Crown required in the rolls o The ability to roll any thickness and width of material up to max capacit...
Ames, IA - Trusted Seller
WDM 310-5-48 #86673
- Manufacturer: WDM
EQUIPPED WITH: • 2 hp TEFC main drive motor • 1.5 hp TEFC PBA motor • NEMA 12 electrical enclosures • Electrics to NFPA 79 Specifications • 230/460-volt 3 phase 60 hertz electrics • 1045 steel rolls • 20 FPM roll...
Ames, IA - Trusted Seller
WDM 404-21-10 #86977
- Manufacturer: WDM
SPECIFICATIONS: FEATURES: • 4140 Pre HT steel rolls • Electric gear motor driven rolls which provides fast start, stop, and reverse • NEMA 12 control cabinet with fused power supply • Electrics meet NFPA 79 speci...
Ames, IA - Trusted Seller
WDM 310-6-60 #86504
- Manufacturer: WDM
FEATURES: • All gear drive • Sealed ball & roller bearings on all rolls and idler gears • Unique all electric drive via gear motors • Infinitely variable speed via variable frequency drives • No Hydraulics • 30% ...
Ames, IA - Trusted Seller
WDM 403-10-8 #86843
- Manufacturer: WDM
SPECIFICATIONS: FEATURES: • 1045 carbon rolls • Hydraulic driven roll which provides instant start, stop, and reverse • NEMA 12 control cabinet with fused control transformer • Electrics meet NFPA 79 specificatio...
Ames, IA - Trusted Seller
WDM K-8-6 #86500
- Manufacturer: WDM
- Model: K-8-6
SPECIFICATIONS: FEATURES: • 1045 carbon rolls • Hydraulic driven roll which provides instant start, stop, and reverse • NEMA 12 control cabinet with fused control transformer • Electrics meet NFPA 79 specificatio...
Ames, IA 
WDM 4-Roll Bending & Forming
- Manufacturer: WDM
- Model: 4-Roll
Good condition WDM 4-Roll Bending & Formings manufactured in 1999. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword
