Textile and leather manufacturing » Weaving

Search By Manufacturer

Search By Country

Building Filters

3536

Used Weaving

  • Trusted Seller
    2000 ELITEX 338

    2000 ELITEX 338

    • Manufacturer: Elitex

    Model 338 Type K; 60 heads; Traverse 6 inch; One machine with Uster quantum clearer and one machine without; Splicer; Used for cone to cone in weaving factory

    Tourcoing, France
  • Trusted Seller
    Sectional warper . VTA

    Sectional warper . VTA

    • Manufacturer: VTA

    VTA sectional warper; Type NC 850; Max working width 260 mm, Creel with pivoting doors 288 x 2 positions, Gauge 24 cm x 24 cm, Used for cotton and polyester, winding machine for beams with a diameter of 1000 mm a...

    Tourcoing, France
  • Trusted Seller
    2000 Direct warper BENNINGER .

    2000 Direct warper BENNINGER .

    • Manufacturer: BENNINGER

    Benninger direct warping machine Model BEN-DIRECT Width: 1800 mm Flywheel diameter: 1000 mm Maximum speed: 1200 m/minute Pressure: 2000 to 6000 N Creel : Model: BEN-CREEL V with OPTOSTOP brakes Year: 2000 Number ...

    Tourcoing, France
  • Trusted Seller
    2006 KARL MAYER GOM

    2006 KARL MAYER GOM

    • Manufacturer: Karl Mayer
    • Model: GOM

    Type GOM 16 / GIROMATIC 16 Working width: 2250mm Max. Beam shaft length incl follower: 2900mm No of winding units: 16 packages Colour sequence for 16 colors: computer-controlled Prebeaming system Max. warp beam ...

    Tourcoing, France
  • Trusted Seller
    1999 MENZEL Inspecting machine

    1999 MENZEL Inspecting machine

    • Manufacturer: Menzel

    working width 170 cm with Batcher

    Tourcoing, France
  • Trusted Seller
    2010 SOMET ALPHA PGA

    2010 SOMET ALPHA PGA

    • Manufacturer: Somet
    • Model: ALPHA PGA

    Width 3200 mm; 2 looms Alpha PGA year 2010 Staubli dobby with 16 shafts 2 looms Alpha PGA year 2015 Staubli dobby with 20 shafts Each loom equipped with: 4 weft feeders 10 frames 1 beam 1,5 cloth rollers Still wo...

    Tourcoing, France
  • Trusted Seller
    1984 DORNIER GTN

    1984 DORNIER GTN

    • Manufacturer: Dornier

    DORNIER GTN 8/SD, Modernized with new inverters Working width: 200 cm; 6 colors; accumulators: 4 /machine; Keiser dobby (capacity 24 shafts) 12 levers installed ; speed: 350 rpm. Accessories per loom : 12 Heald...

    Tourcoing, France
  • Trusted Seller
    2003 SULZER P7300

    2003 SULZER P7300

    • Manufacturer: Sulzer
    • Model: P7300

    Type: P7300 B 360 2 EP D12 Width: 360 cm 2 Colors 2 Weft Accumulators per machine WITH SIDE TUCK-IN Staubli cam box 10 Shafts Installed 6 Heald Frames per machine, Make GROB 6 Drop bars Split Beam Execution Elect...

    Tourcoing, France
  • Trusted Seller
    1990 Laboratory Steamer KUSTERS .

    1990 Laboratory Steamer KUSTERS .

    • Manufacturer: Küsters

    TYPE 240.10-500, WORKING WIDTH 500 Last availability check: Cogliandro own the machine

    Tourcoing, France
  • Trusted Seller
    2005 DORNIER AWS

    2005 DORNIER AWS

    • Manufacturer: Dornier
    • Model: AWS

    width: 250 cm; AT2 panel; Staubli 1761A cam box with capacity for 10 shafts; 4 ECS (4 colors). Accessories per loom : 8 Heald-frames; 1.5 beam; 4 feeders; Neuenhauser Batching motion included

    Tourcoing, France
  • Trusted Seller
    2004 DORNIER AWS

    2004 DORNIER AWS

    • Manufacturer: Dornier
    • Model: AWS

    Dornier AWS 4/S ; Width 210 cm ; AT2 panel ; Dobby Staubli 2871/2 (12 shafts 8/12 levers) 6 heald frames average 4 colours, 4 feeders 1.5 beam

    Tourcoing, France
  • Trusted Seller
    1998 Cone to cone winder

    1998 Cone to cone winder MOTOCONO .

    • Manufacturer: MOTOCONO

    \1 MOTOCONO CONE TO CONE WINDER Type BDA-6; year 1998; number of spindles : 6; traverse 6" cylindrical; automatic doffing, waxing; voltage 380/3/50

    Tourcoing, France
  • Trusted Seller
    1997 HAUSER Cutting and stacking

    1997 HAUSER Cutting and stacking machine

    • Manufacturer: Hauser

    AUTOMATIC CUT

    Tourcoing, France
  • Trusted Seller
    2001 CALEMARD Inspection, rolling, packing

    2001 CALEMARD Inspection, rolling, packing

    • Manufacturer: CALEMARD

    Complete line From CALEMARD and HAGEMANN FOLLO Cylinder width: 240 cm Unwinder and inspection. Mechanical longitudinal / Vertical cutting for cutting fabric edges and / or division of the fabric (3 knives) ; Meas...

    Tourcoing, France
  • Trusted Seller
    1994 Van de Wiele CRM

    1994 Van de Wiele CRM 72

    • Manufacturer: Van de Wiele

    Carpet weaving machineFace-to-face cut-pile carpet loom Width: 400 cmJacquard Type:PTRReed Density: 320Number of Colours: 5Harness Cords: 6400Total Pile Dents: 1280Pile Width: 4020 mmMin lancet: 7 mmMax Lancet: 3...

    Spain
3132333435

Overview

Weaving equipment encompasses a variety of machinery used in the textile industry to interlace threads or yarns to create fabrics. This category includes looms, warping machines, and other related devices. These machines are essential for producing a wide range of textiles, from simple cloth to complex woven patterns, and are used in both industrial and small-scale textile production.

FAQ

What should I consider when buying a used weaving machine?

Consider the machine's age, operational condition, and capacity. Check for any signs of wear and tear, and review maintenance records if available.

How do I ensure the weaving machine is shipped safely to my location?

Use a specialized machinery transport service. Ensure the machine is properly secured and protected to prevent damage during transit.

What is the maintenance schedule for a weaving machine?

Regular maintenance should include lubrication of moving parts, checking for thread tension and alignment, and cleaning to remove lint and debris. Follow the manufacturer's guidelines for detailed maintenance intervals.