- Trusted Seller
2005 WELEX 41" (2) Fixed Position
- Manufacturer: Welex
Used Welex two-position winder. Both positions are fixed and include 3" air shafts for approximately 36" OD finished rolls. Included are operation controls, 6" shafts and gear head motor for each winding position...
Hainesport, NJ 
Welex 3.5" 30:1 L/D Extruder – 150 HP, Vented Barrel, Melt Pump & Screen Changer
- Manufacturer: Welex
10755146 Used Welex 3.5" 30:1 L/D Extruder. Electrically heated water cooled (closed loop) and vented barrel at an approximate 69" center line height. Center line height can be reduced approximately 8" by removin...
Belvidere, IL
Welex HS 3.0 40D SV Single Screw Extruder | 3" Screw | 40:1 L/D | 1520 RPM | 550 HP VFD Drive | Vented Barrel
- Manufacturer: Welex
54129004 Used Welex HS 3.0 40D SV Single Screw Extruder | 3" Screw | 40:1 L/D | 1520 RPM | 550 HP VFD Drive | Vented Barrel. 1520 RPM max. screw speed. Electric heated, air cooled barrel. Vented barrel. 57" barre...
Belvidere, IL- Trusted Seller
54" Wide Welex Sheet Stack, 18" x 24" x 24" Diameter Rolls
- Manufacturer: Welex
54" Wide Welex Sheet Stack, 18" x 24" x 24" Diameter Rolls Downstacking Configuration 18" Diameter Top Roll 24" Diameter Middle And Bottom Roll Middle Roll Is Matte Finish, Top And Bottom Rolls Are Chrome 54" Wid...
United States - Trusted Seller
3.5" Welex Shank Extrusion Screw, 24:1 L/D Ratio
- Manufacturer: Welex
- Model: 35
Diameter at Feed Opening : 3.484" , Diameter at Center of Screw: 3.434" , Diameter at Die end: 3.490" Keyway Dimensions L: 6-78" W: 3/4" H: 3/8" Screw weighs Approximately 250 Lbs, Approximate Dimensions L: 100" ...
United States - Trusted Seller
Welex Melt Pump, Model 90/90
- Manufacturer: Welex
Welex Melt Pump, Model 90/90 With Gearbox And Motor Welex Part Number 1100.0036 S/N 00-822 40 HP AC Motor, 300 To 1800 Constant Torque, 230/460, 95 Amps At 230, 47.4 Amps At 460, 60 Hertz 18.96 Right Angle Gearbo...
United States - Trusted Seller
60" Wide Welex Sheet Stack, 12" Top Roll, 24" Middle And Bottom Roll
- Manufacturer: Welex
Used 60" Wide Welex Sheet Stack, 12" Top Roll, 24" Middle And Bottom Roll Chain Driven By Approx. 10 HP AC Motor Chrome Top And Bottom Roll Matte Middle Roll Silicone Bath 12' Long Cooling Conveyor 60" Wide X 8" ...
United States - Trusted Seller
Koellmann UNEX 8.13 Gearbox For Welex Extruder
- Manufacturer: Welex
Koellmann UNEX 8.13 Gearbox For Welex Extruder Rated To 500 HP Input RPM 1750 Output RPM 200 S/N 29713400 Mechanically Driven Oil Pump With Heat Exchanger
United States - Trusted Seller
41" Wide Welex Sheet Stack, 12" Top Roll, 24" Middle And Bottom Roll
- Manufacturer: Welex
Used 41" Wide Welex Sheet Stack, Downstacking, Model Number 12-24-24 12" Diameter Top Roll, 24" Diameter Middle Roll, And 24" Diameter Bottom Roll 480/3/60 10HP AEC Drive, Model Number: VTP10Q, S/N: 30F0689 460/5...
United States - Trusted Seller
54" Wide Welex/Production Components Sheet Die
- Manufacturer: Welex
54" Wide Welex/Production Components Sheet Die Restrictor Bar
United States - Trusted Seller
54" Wide Welex/Production Components Sheet Die
- Manufacturer: Welex
54" Wide Welex/Production Components Sheet Die Ultraflex R100 Job Number 4182-97 Production Components S/N 95-17702 Welex S/N 0487 1954 Restrictor Bar
United States - Trusted Seller
54" Wide Welex Sheet Stack
- Manufacturer: Welex
Used Welex 3 Chrome Roll Down Stack, 54" Wide Chill Rolls, 18" x 24" x 24"" Diameter Rolls, Chain Driven By AC Drive, 68" Centerline Pneumatic Roll Pressure Water System With (3) 7.5 HP Pumps, Heaters, And Heat E...
United States - Trusted Seller
4.5" Welex Extruder, 30:1 L/D, 250 HP AC Motor, With Hydraulic Screen Changer
- Manufacturer: Welex
Single Screw, Water Cooled, Vented Barrel, 5 Barrel Zones, 12 Downstream Zones 42" Centerline Height 250 HP North American Electric AC Motor, Model PE449T-250-6-IN 460/3/60, 280 FLA 1185 RPM Welex Type 45V Change...
United States - Trusted Seller
3.5" Welex Single Screw Extruder, Model 350-30:1-LHV with Screen Changer & Melt Pump
- Manufacturer: Welex
Used 3.5" Welex Single Screw Extruder, Model 350-30:1-LHV, 30:1 Water Cooled Barrel Welex Gearbox, Type PEDS560, 430hp Capacity, Gearbox Ratio 7.7:1, GB Serial Number: 71092783-4 5 Barrel Zones, Water Cooled, 2hp...
United States - Trusted Seller
67" Wide Welex Sheet Line With 6" Extruder
- Manufacturer: Welex
6" Welex Extruder, Model 6.0 30D, 30:1 L/D, Air-Cooled, 6 Barrel Zones, 18 Die Zones, Direct Driven To Koellmann UNEX 8.13 Gearbox With 8.74:1 Gearbox Ratio, With 500 HP Baldor AC Motor, 500 HP WEG Drive, S/N 718...
United States
Tip: Enter manufacturer, model or keyword
