Welex 3.5" 30:1 L/D Extruder – 150 HP, Vented Barrel, Melt Pump & Screen Changer
- Manufacturer: Welex
10755146 Used Welex 3.5" 30:1 L/D Extruder. Electrically heated water cooled (closed loop) and vented barrel at an approximate 69" center line height. Center line height can be reduced approximately 8" by removin...
Belvidere, IL- Trusted Seller
Welex Melt Pump, Model 90/90
- Manufacturer: Welex
Welex Melt Pump, Model 90/90 With Gearbox And Motor Welex Part Number 1100.0036 S/N 00-822 40 HP AC Motor, 300 To 1800 Constant Torque, 230/460, 95 Amps At 230, 47.4 Amps At 460, 60 Hertz 18.96 Right Angle Gearbo...
United States - Trusted Seller
3.5" Welex Single Screw Extruder, Model 350-30:1-LHV with Screen Changer & Melt Pump
- Manufacturer: Welex
Used 3.5" Welex Single Screw Extruder, Model 350-30:1-LHV, 30:1 Water Cooled Barrel Welex Gearbox, Type PEDS560, 430hp Capacity, Gearbox Ratio 7.7:1, GB Serial Number: 71092783-4 5 Barrel Zones, Water Cooled, 2hp...
United States - Trusted Seller
Welex 350
- Manufacturer: Welex
3.5" Used Extruder Used Welex 350 Used Plastic Extrusion Machinery for sale. This pre-owned machine is available all over the US
Sterling, MA - Trusted Seller
41" Wide Welex Sheet Stack, 12" Top Roll, 24" Middle And Bottom Roll
- Manufacturer: Welex
Used 41" Wide Welex Sheet Stack, Downstacking, Model Number 12-24-24 12" Diameter Top Roll, 24" Diameter Middle Roll, And 24" Diameter Bottom Roll 480/3/60 10HP AEC Drive, Model Number: VTP10Q, S/N: 30F0689 460/5...
United States - Trusted Seller
1988 Welex 41''
- Manufacturer: Welex
Used Welex 41" sheet extrusion line: - 3.5" 30/1/ L/D Welex extruder. Has vented and plugged barrel, but includes 2 stage screw and spare screw. Has electrically heated water cooled system with water pump. Extrud...
Valley Cottage, NY - Trusted Seller
1988 Welex 41''
- Manufacturer: Welex
Used Welex 41" sheet extrusion line:- 3.5" 30/1/ L/D Welex extruder. Has vented and plugged barrel, but includes 2 stage screw and spare screw. Has electrically heated water cooled system with water pump. Extrude...
Valley Cottage, NY - Trusted Seller
Welex 4.5" Pelletizing Line
- Manufacturer: Welex
The Welex 4.5" Pelletizing Line is a comprehensive recycling solution designed for efficient material processing. It features a 4.5-inch diameter vented barrel with a length-to-diameter (L/D) ratio of 36:1. Equip...
- Trusted Seller
Welex 88"
- Manufacturer: Welex
Used Welex cast station only consisting of an 18" X 88" cast roll mounted on frame, with drive. Serial #8441. Includes 5 HP main drive with 176/1 ratio euro drive gearbox. Includes 5 HP water pump and heat exchan...
Hainesport, NJ 
WELEX 3.5″ 30:1 L/D 150 17954
- Manufacturer: Welex
One (1) used Welex 3.5″ 30:1 L/D extruder. Electrically heated water cooled (closed loop) and vented barrel at an approximate 69″ center line height. Center line height can be reduced approximately 8″ by removing...
Elk Grove Village, IL
890mm wide Welex extrusion line. 90mm Welex extruder with gear pump, 50mm coex eti#33.000
- Manufacturer: Welex
890mm wide Welex extrusion line. 90mm Welex extruder with gear pump, 50mm coex, ABA feedblock 890mm x 300mm calender, puimp group haul off winder. 1997 * 90mm Welex single screw extruder. Model 350-30D. Vented. 7...
United Kingdom- Trusted Seller
Continuous flow pump EXTRUSIONEXTRUSION HEADS AND CALIBRATORS
- Manufacturer: WELEX
Continuous flow pump Brand: WELEX for Extruder: Ø 120. EXTRUSION HEADS AND CALIBRATORS Sheet extrusion head GT-4716 Model: 280 mm + info: Type: In state View product GT-4581 260 mm Of sheet Calibrators GT-2397 Up...
Alicante, Spain - Trusted Seller
1040mm wide Welex 3 roll polishing stack with 1040mm x 450mm rolls, pump group, 2 roll haul off. Silicone bath.
- Manufacturer: Welex
1040mm wide Welex 3 roll polishing stack with 1040mm x 450mm rolls, pump group, 2 roll haul off. Silicone bath. 1040mm x 450mm dia rolls Manual wedge mount nip control Operators control pendant Updated cont...
Swindon, United Kingdom 
WELEX 6″ 36:1 L/D 500 18830
- Manufacturer: Welex
One (1) used Welex model 6.0 36D 6″ 36:1 L/D extruder. S/N 6492. Having an electrically heated, water cooled (closed loop), and vented barrel at an approximate 66″ center line height. Koellman model Unex 8.13 gea...
Elk Grove Village, IL- Trusted Seller
1040mm wide Welex coextrusion sheet line with 90mm + 50mm extruders, GP, die, 1040mm wide x 450mm calender, pumps, haul off winder. 1996
- Manufacturer: Welex
1040mm wide Welex coextrusion sheet line with 90mm + 50mm extruders, GP, die, 1040mm wide x 450mm calender, pumps, haul off winder. 1996 90mm Welex single screw extruder model 350. 30D vented water cooled barrel....
Swindon, United Kingdom
Tip: Enter manufacturer, model or keyword