- Trusted Seller
Hydraulic sheet metal shear Voest Alpine
- Manufacturer: Voestalpine
Cutting width 3150 mm max. sheet thickness 6 mm rear light curtain safety Type BTHS 6x3150 360x260x170 cm
Hellmonsödt, Austria - Trusted Seller
1968 Motorized plate shear HESSE KS 12
- Manufacturer: Hesse
- Maximum thickness: 2 mm
- Shearing length: 1,050 mm
man. back gauge with hand wheel and scale user manual in GERMAN didn't according to CE rules
$3,835 USDVienna, Austria - Trusted Seller
1998 Hydraulic plate shear LVD LVD HST-C 31/6
- Model: HST-C
- Maximum thickness: 6 mm
- Shearing length: 3,100 mm
Motorized backgauge 1000 mm, ball screws, digital display Cutting gap adjustment from the front with handwheel Cutting length adjusment Cutting angle adjustment Downholer safety guard Rear safety via light barrie...
- Auction
DURMA - IW 80 BTD - Steel profile shear - 2005
- Manufacturer: Durma - Durmazlar
- Model: IW 80
3 chamfers 50 Hz Control voltage 24 V Rated current 21 A +43 6641029345
Bad Waltersdorf, AustriaVisit Auction Website - Trusted Seller
HESSE by ISITAN IDK-5
- Manufacturer: Hesse
- Throat depth: 1,200 mm
- Maximum thickness: 5 mm
Mobile control panel Hydraulic clamp on center Gearbox motor with brake Motorized sheet centering system Inside cutting system According to EC safety regulations Operating manual Optional equipment:
- Trusted Seller
ERBEND EMS 3220
- Manufacturer: Erbend
- Model: EMS 3220
- Maximum thickness: 2 mm
- Shearing length: 3,200 mm
NC-controlled backgauge 750 mm ELGO P40T touchscreen Rear light barrier protection Front finger guard cover Extendable front support bracket Cutting line illumination Equipment compliant with CE directives Operat...
- Trusted Seller
2021 HESSE by DURMA MS 3004
- Manufacturer: Durma - Durmazlar
- Model: MS 3004
- Maximum thickness: 4 mm
- Shearing length: 3,100 mm
mot. back gauge with digital readout DT 5 hold down with rubber pads side lay with T-sluts 2 supporting arms balls in the table tilt stop light barriers on the back of the machine cutting line illumination user m...
- Trusted Seller
2004 HESSE by DURMA RGM 1303
- Manufacturer: Durma - Durmazlar
- Model: RGM 1303
- Maximum thickness: 3 mm
- Shearing length: 1,350 mm
manual back gauge automatic sheet hold down hold down with rubber pads moveable foot switch side support arm 2 supporting arms user manual in GERMAN does not complie with the German UVV and Austrian AMVO
- Trusted Seller
2025 HESSE by DURMA MS 3004
- Manufacturer: Durma - Durmazlar
- Model: MS 3004
- Maximum thickness: 4 mm
- Shearing length: 3,100 mm
mot. back gauge with digital readout DT 5 hold down with rubber pads side lay with T-sluts 2 supporting arms ball in the table tape measure tilt stop light barriers on the back of the machine cutting line illumin...
- Trusted Seller
HESSE by DURMA VS 6013
- Manufacturer: Durma - Durmazlar
- Model: VS 6013
- Maximum thickness: 13 mm
- Shearing length: 6,080 mm
linear guided CNC touch screen D-touch 7 back gauge, cutting angle, cutting gap, cutting length, quantity USB port cutting line illumination foldable ball screws for back gauge balls in table foldable finger prot...
- Trusted Seller
HESSE by DURMA SBT 4006
- Manufacturer: Durma - Durmazlar
- Model: SBT 4006
- Maximum thickness: 6 mm
- Shearing length: 4,100 mm
Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounte...
- Trusted Seller
RABBA HS 16/1500
- Manufacturer: RABBA
- Maximum thickness: 16 mm
- Shearing length: 1,530 mm
hydr. drive unit, completely integrated in the machine body overload safety, hydraulic and electrical adjusting of the cutting angle adjusting of the cutting gap blank holder pressure, adjustable support arm with...
Vienna, Austria - Trusted Seller
RABBA HS 6/1000
- Manufacturer: RABBA
- Maximum thickness: 6 mm
- Shearing length: 1,030 mm
hydr. drive unit, completely integrated in the machine body overload safety, hydraulic and electrical adjusting of the cutting angle adjusting of the cutting gap blank holder pressure, adjustable support arm with...
Vienna, Austria - Trusted Seller
2002 HESSE by DURMA DHGM 3010
- Manufacturer: Durma - Durmazlar
- Model: DHGM 3010
- Maximum thickness: 10 mm
- Shearing length: 3,100 mm
Swing cut construction NC-preselection system ENC100 for back gauge, cutting length and piece counter Motorized back gauge 1000 mm on ball screws, folding upwards Hydraulic hold down pistons Foot switch Central, ...
- Trusted Seller
2016 HM Machinery HM JBS 2000/3
- Manufacturer: HM
- Maximum thickness: 3 mm
- Shearing length: 2,025 mm
Manual back gauge 500 mm Foot pedal Side stop 4 table support arms Light barrier protection at the rear of the machine Stroke counter Sheet ejection to the front for small parts Operating manual in English with E...
Durma - Durmazlar VS 3006 Shearing Equipment
- Manufacturer: Durma - Durmazlar
- Model: VS 3006
Good condition Durma - Durmazlar VS 3006 Shearing Equipment available between 2010 and 2013 years. Located in Austria and other countries. Click request price for more information.
Austria
Tip: Enter manufacturer, model or keyword