Used in Schleswig-Holstein, Germany

Filament Machine

Application: Production of plastic monofilaments / 3D printer filaments Extruder: Single Screw Extruder Screw diameter: approx. 25mm Max. throughput: approx. 5-8kg/h, maximum 10kg/h Motor power extruder: 2.2 kW T...

SCM SINTEX Four-Sided Planer

• Model: Sintex

Machine no. FROM/090192 Built in 1995 Planning width max. 180mm Planing height max. 105mm Planner heads incl. Number of spindles: 4 pieces Spindle: bottom Spindle: right Spindle: left Spindle: great High/low adju...

BECK KONTRA Stack Gluing Press

• Manufacturer: Beck

5 floors Clamping depth 1050 mm 1 pressure beam -1500 mm long, 60 mm high, per floor 3 infinitely adjustable pendulum counter bearings, 400 mm long, per shelf 2 hold-downs with handwheel, per shelf 5 support arms...

BECK KONTRA Stack Gluing Press

• Manufacturer: Beck

5 floors Clamping depth 1050 mm 1 pressure beam -1500 mm long, 60 mm high, per floor 3 infinitely adjustable pendulum counter bearings, 400 mm long, per shelf 2 hold-downs with handwheel, per shelf 5 support arms...

JOHANNSEN T82K Long Belt Grinder

• Manufacturer: Johannsen

Motor data: 380 V - 50 Hz - 17 A - 7.7 kW Table dimensions: 2800 x 950 mm Height adjustment by handwheel Offset: 800mm Suction nozzle: 1 x 180 mm - 1 x 120 mm Sanding belt length: 7800 mm

GUBISCH B230 + 1P four-sided planner with 5th unispindle

• Manufacturer: Gubisch

Type B230 + 1 P 5 planing spindles, the 5th as a unispindle Machine works, but is unchecked, not cleaned, not overhauled Condition: dismantled and stored as at the previous customer Tech. Data: Diameter of spindl...

SCHUKO ECO VAR 97 Chip Filter with Rotary Valve

• Manufacturer: Schuko

Chip extraction system SCHUKO EcoVar 97 Rotary valve chip container Filter area 375m² Total Vol. Flow 26.679m³/h Return air available including 4 extraction fans 15 kW, 11 kW, 2x 7.5 kW 1 transport fan 5.5 kW for...

SCHUBERT Heating Plate Veneer Press

• Manufacturer: Schubert

Gold anodized heating plates works perfectly heats over the entire surface above and below Crimping dimensions 1300x2600mm

2021 Imants Spading Machine 48SX300H

• Manufacturer: Imants

Spading machine 48SX300H includes: Powered harrow roller Quick-change system for spade blades Hydraulic strain relief PTO shaft (Walterscheid) with cam clutch LED lighting Up to 185 kW (250 HP) Working depth 15-3...

2014 Mayer Siloking DA 2300

• Manufacturer: Mayer
• Model: SILOKING DA 2300

Category: Other stable equipment

2012 Mayer SF 14 cbm

• Manufacturer: Mayer

SF 14 cbm - Lined with Silonox in 2022 - Mechanical counterblades - Mineral hopper - Camera in the rear and hopper - Discharge right and left - Tires 385/55 R22.5 front, approx. 40% - Tires 27x10-12 rear, approx....

2012 Vaderstad Rapid RDA 600S

• Manufacturer: Väderstad
• Model: Rapid
• Working width: 6 m
• no. of rows: 4 rows

Rapid RDA 600S Row spacing: 13 cm Fertilizer placement Following roller Seed rate adjustment Hydraulic lift arm

2004 Duport Alltrac 8044

• Manufacturer: Duport

Alltrac 8044 Design: Mounted Mounting Category: 3 Hydraulically foldable 44 discs Drip stop Depth control sensor Discs 15-20% Horizontal distributor Lighting system

2019 Fendt 724 S4 ProfiPlus

• Manufacturer: Fendt
• Model: 724 VARIO S4
• Horsepower: 237 hp
• Hours: 6,200 h

724 Vario S4 ProfiPlus - RTK - 4 double-acting hydraulic valves at the rear, 1 double-acting hydraulic valve at the front - Automatic trailer hitch Sold on behalf of a customer, please contact us if interested:

2022 Fendt Slicer 860

• Manufacturer: Fendt
• Model: Slicer
• Cutting width: 3.1 m
• Transport width: 2.99 m

Slicer 860 - Cat. II - Blades per disk: 2 pcs. - hydr. folding - PTO shaft - Cutting height adjustment - Mechanical collision protection