Building Filters
- Trusted Seller
1/16" NILSON "751" WIRE FORM FOURSLIDE w/UPDATED CLECO PC-100 CONTROLS - DIE PROTECTION SYSTEM
- Manufacturer: Nilson
- Model: 751
- Wire diameter: 1.59 mm
1/16" NILSON "751" FOURSLIDE Imperial Metric Serial No. 82900, Model 751 EQUIPPED WITH: Updated Cleco PC-100 Controls Data Instruments DiePro 1500 Die Protection System CATALOG SPECIFICATIONS: Stock Width, Maximu...
- Trusted Seller
2009 OMCG 2D CNC
- Manufacturer: OMCG
Diameter: from 2 to 8mm 600 N/mm2 tensile | Feeding axis: from 0 mm to infinite | Feed accuracy: +/- 0.10mm | Feed speed: up to 1380 mm/sec | Axes: 2 w/simultaneous motion or by interpolation | Electrics: 460/3/...
Ivyland, PA - Trusted Seller
1995 8MM TAIHEI TSF-808S 3 Axis CNC WIre Former #0508919
- Manufacturer: Taihei
- Wire diameter: 8 mm
SPECIFICATIONS: Machine Specifications WIRE FORMING SPEEDS: WIRE STRAIGHTENING MECHANISM: SPECIAL & PRECISION GROUND SQUARE GROOVED ROLLS/(PATENTED) DIGITAL CONTROLLER:
Toledo, OH - Trusted Seller
NILSON S2F #0510919
- Manufacturer: Nilson
- Model: S2F
Machine Specifications ... ...Show more Slides: 4 | Yle="box-sizing: border-box;"> | Maximum wire diameter: 1/8" | Maximum ribbon width: 1-3/8" | Maximum feed length: 10" | Catalog speed: 50 TO 155 STROKES/MIN | ...
Toledo, OH - Trusted Seller
Wafios N1 Nail Header
- Manufacturer: Wafios
- Model: N1
Unit is USED with visible minor surface wear and some minor scratches none affecting the functionality or the intended use of the unit. Unit has NOT been run in recent production or tested by us. What you see in ...
Hiram, OH - Trusted Seller
1967 NILSON MODEL #S3F WIRE BENDING FOUR SLIDE MACHINE . #1156822
- Manufacturer: Nilson
- Model: S3F
Specifications: New: 1967 | Clutch: ELECTRIC | Slides: 4 | Wire diameter: 3/16" | Strip width: 2" | Length of feed: 15" | Front slide stroke: 1.75" | Side slides stroke: 3.5" | Back slide stroke: 1.75" | Stripper...
Toledo, OH - Trusted Seller
1967 NILSON S3F #1156722
- Manufacturer: Nilson
- Model: S3F
New: 1967 | Slides: 4 | Wire diameter: 3/16" | Strip width: 2" | Length of feed: 15" | Front slide stroke: 1.75" | Side slides stroke: 3.5" | Back slide stroke: 1.75" | Stripper stroke: 2" | Press stroke: 1" | D...
Toledo, OH - Trusted Seller
CUSTOM WIRE TRAVERSING TAKE-UP ROCKFORD DYNA-TORQUE (14402)
- Manufacturer: Rockford
CUSTOM TRAVERSING WIRE TAKE-UP Stock # 14402 -2-3/4" WIDE -5-1/2" MAX. O.D. -5/8" SHAFT DIAMETER **Temporary Specifications Subject to Revisions** **PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE** **ALL SPECI...
North Branford, CT - Trusted Seller
9/16" (14mm) VAUGHN #15 DOUBLE DECK MOTOBLOC BULLBLOCK Stock # 14207
- Manufacturer: VAUGHN
9/16" (14mm) VAUGHN #15 DOUBLE DECK MOTOBLOC BULLBLOCK Stock # 14207 9/16" (14MM) VAUGHN #15 DOUBLE DECK MOTOBLOC BULLBLOCK MANUFACTURER - VAUGHN MODEL NUMBER - 15 TYPE - MOTOBLOC DOUBLE DECK SERIAL NUMBER - 1351...
North Branford, CT - Trusted Seller
2011 AIM INC. AFC6
- Manufacturer: AIM INC.
AIM Model AFC-6 3 Dimensional CNC Wire Bender S/N CBE09152011 NEW 2011 CUT-OFF DIAMETER ................. 2mm-6.4mm @550N/mm2 WIRE FEED RESOLUTION ............. .006 mm WIRE FEED SPEED .....................
Harrison, NJ - Trusted Seller
1979 NILSON 751
- Manufacturer: Nilson
- Model: 751
Diameter: 1/16" | Strip width: 3/4" | Standard feed length: 3" | Spm: 40-400 | Dual front slides: 3/4" Stroke | Sides: 1-1/4" Stroke | Stroke of back slide: 3/4" | Press stroke: 3/16" | Die set length: 4" | Tonn...
Ivyland, PA - Trusted Seller
WAFIOS N5
- Manufacturer: Wafios
- Model: N5
Nail diameter: .086" - .149" | Nail length: .511" - 3.937" | Production: 430 PPM | Electrics: AC Motor & Controls | Approx. weight: 6500 lbs | Equipped with: Check out our full inventory
Ivyland, PA - Trusted Seller
WAFIOS N5
- Manufacturer: Wafios
- Model: N5
Nail diameter: .086" - .149" | Nail length: .511" - 3.937" | Production: 430 PPM | Electrics: AC Motor & Controls | Approx. weight: 6500 lbs | Equipped with: Check out our full inventory
Ivyland, PA - Trusted Seller
WAFIOS N5
- Manufacturer: Wafios
- Model: N5
Production: 430 PPM | Electrics: AC Motor & Controls | Approx. weight: 6500 lbs | Nail diameter: .086" - .149" | Nail length: .511" - 3.937" | Equipped with: Check out our full inventory
Ivyland, PA - Trusted Seller
WIRE ROD EQUIPMENT 720000 MT PER YEAR ROD MILL (14380)
- Manufacturer: WIRE ROD EQUIPMENT
720,000 TPY Used Wire Rod Rolling Mill by Wire Rod Equipment, Model 720000 MT per Year Rod Mill (14380). Ideal for rod and bar rolling, this used rolling mill offers reliable performance. 720,000 TPY WIRE ROD MIL...
North Branford, CT
