Used WMW Machine Tools in Saxony, Germany

1960 WMW Saalfeld BKR 4 x16

• Manufacturer: WMW
• Model: BKR 4X16
• Power requirement: 6.3 kilowatt

Application: Drilling, countersinking; reaming and thread cutting. Each drill spindle has its own drive motor Equipment: Foot pedal/operation Hand crank

1979 WMW DH 250III x630

• Manufacturer: WMW
• Model: DH 250
• Power requirement: 7 kilowatt

Application: Mainly for relief turning and relief grinding of cutting tools (especially hobs with and without thread pitch). Back turning and relief grinding is possible from the front, the rear and in the axial ...

1980 WMW - BAD SALZUNGEN MAR 250/2

• Manufacturer: WMW
• Model: MAR 250/2
• Power requirement: 4 kilowatt

Band Leveling Machine with feed equipment: - sideways band guidance rolls model: - band intake height horizontal:1250mm - tiltable: positiv 30°; negativ 15°

power

Alignment plate, with frame WMW With lamp ! used, tested !

WMW tapping attachment

• Manufacturer: WMW

Tapping attachment, tapping head WMW GSA2 for taps M5 - M16 MK2 As good as new !

WMW twist drill

• Manufacturer: WMW

Twist drills WMW, WERKÖ Ø 60.0 HSS New ! Diameter: Ø 60.0 mm | Cutting angle: 118° | Cutting fabric: HSS | Morse taper: MK5 | Overall length: 424 mm | A-measure: 266 mm | Span length: 232 mm | Dimensions ( packag...

WMW tapping attachment

• Manufacturer: WMW

Tapping attachment WMW, ABW GB5 MK 5 M24 - M64 used, tested !

WMW twist drill

• Manufacturer: WMW

Twist drills WMW, WERKÖ Ø 81,0 HSS used, tested ! Diameter: Ø 81.0 mm | Cutting angle: 118° | Cutting fabric: HSS | Morse taper: MK6 | Overall length: 470 mm | A-measure: 240 mm | Span length: 215 mm | Dimensions...

WMW tapping attachment

• Manufacturer: WMW

Tapping attachment, tapping head WMW GSA1 for taps M2 - M6 Machine side: Holder for drill chuck tang DIN 238, size: B12 New ! preserved !

WMW tapping attachment

• Manufacturer: WMW

Tapping attachment WMW, ABW GB2 used, checked, with documents !

WMW tapping attachment

• Manufacturer: WMW

Tapping attachment WMW, ABW GB2 MK 2 M3 - M8 with inserts Ø 2.5 / 3.5 / 4.0 / 4.5 / 5.5 / 6.0 mm used, tested !

WMW alignment plate

• Manufacturer: WMW

Straightening plate, straightening table WMW TGL 10050 used, tested !

WMW TW 4x2

• Manufacturer: WMW

Welded steel construction Wooden bolster support 4x double wheel - solid rubber Steering on both sides with tow bar on both wheel pairs tow bar/coupling rod length 1900 mm, pin eye Ø 40 mm, handle 2x rear/front c...

Vices

• Manufacturer: WMW

Machine vice WMW SN 160 used, tested !

502 Bad Gateway

• Manufacturer: WMW

Machine vice WMW, ROTO RECORD SN 160 used, tested !