search

  • VDF Wohlenberg 41E19 Universal Lathe

    $6,518 - Langenlonsheim, Germany
    • Manufacturer: Wohlenberg

    offered is a universal lathe center height: about 720 mm, distance between centers: 2500 mm, the machine is set up to 100 mm, with face plate and 3 lunettes, 2 special live center

  • 1967 VDF Wohlenberg 1500 x 3000 lathe

    $8,996 - Grubbenvorst, Netherlands
    • Manufacturer: Wohlenberg

    turning length 3000 mm between centers clamping diameter 1100 mm to 3000 mm length clamping diameter on the face plate length 1450 mm, 300 mm

  • 1988 Vdf Wohlenberg V 1000 x 2000

    $25,620 - Germany Recently Added
    • Manufacturer: Wohlenberg
    • Spindle Bore: 104 mm
    • Spindle Nose: DIN 55027 Gr.11

    swing over bed 1000 mmswing over carriage 760 mmturning length 2000 mmspindel head...

  • 1976 Wohlenberg D-4061

    No price - Smyrna, TN Recently Added
    • Manufacturer: Wohlenberg
    • Distance between Centers: 338"

    49.2" chuck 3 way bed construction 26" roller rest 2) steady rests chip conveyor

  • Wohlenberg Hannover V1180 IME / lathe

    No price - Mudersbach, Germany Recently Added
    • Manufacturer: Wohlenberg

    turning diameter over bed 1185 mm turning diameter over support 940 mm turning length 3000 mm tip height 590 mm turning diameter in the offset 1245 mm spindle speed rpm 3.5-1120 spindle bore 102 mm...

  • 1967 WOHLENBERG V 1000

    No price - Bünde, Germany
    • Manufacturer: Wohlenberg
    • Model: V 1000
    • Spindle Bore: 82 mm

    guideways in exellent condition control: conventional | 3 jaw chuck: forkhardt f 500 | fixed steady: 450 mm | spindle bore: 82 mm | spindle head: din 55022 gr. 11 | centre height: 500 mm | feeds - ...

  • 1963 WOHLENBERG V 1180

    No price - Bünde, Germany
    • Manufacturer: Wohlenberg
    • Spindle Bore: 102 mm

    the machine is not been heavily used, the guideways are in very good condition. the drive motor has ground mounting, second slide.

  • 1962 VDF-WOHLENBERG E 800 V

    No price - Mönchengladbach, Germany
    • Manufacturer: Wohlenberg
    • Spindle Bore: 78 mm

    3 jaw chuck dia. 400 mm face plate dia. 900 mm rapid feed for longitudinal movement feed at upper support

  • 1960 VDF Wohlenberg Hannover E 700 Lathe

    $12,701 - Wiebelsheim, Germany
    • Manufacturer: Wohlenberg

    1 used lathe: vdf wohlenberg - hannover year: 1960 type: e 700 center height: 380 mm distance between centers: 4000 mm swing over bed: 760 mm swing over cross slide: 500 mm faceplate diameter: 800 ...

  • 1970 VDF Wohlenberg M-1600B 26664

    No price - Melville, NY Recently Added
    • Manufacturer: Wohlenberg
    • Distance between Centers: 264"

    serial no.: 3853 heidenhain digital readout system 64" face plate with 4-adj. face plate jaws carriage to pass steady rests and tailstock 2-25" diameter steady rests 3-way bed construction inch/met...