Used Wood Chippers in Canada

2017 BELLS MACHINING 8000

• Manufacturer: BELLS MACHINING

Weekly Deal 2017 Bells 8000 Firewood Processor Electric motor, needs 3 phase power 8 & 16 way splitting wedges Conveyor and tumbler not included 60″ Simonds Circular Saw 7″ and 56 ton splitter cylinder Max log di...

2024 Mower King SSBX42S Skid Steer Wood Chipper

• Manufacturer: King
• Model: SSBX42S

2024 Mower King SSBX42S Skid Steer Wood Chipper for sale Contact today

1993 Bandit 200+ Wood Chipper Diesel, Serial # 6065

• Manufacturer: Bandit
• Model: 200+
• Operating weight: 1,650 kg
• Fuel type: diesel

Serial # 6065 1993 Bandit 200+ Wood Chipper Diesel, 1.6, yellow exterior. Chipping capacity is 12" diameter 2 5/16 inches hitch ball 4 pin flat electrical plug Hydraulic brakes Unit taken out of service in Novemb...

Interquip Drum Chipper

• Manufacturer: Interquip

- Similar to Bruks - 360x650-8 - 3 knife drum chipper - 20" x 27" capacity - 125 HP, 1770 RPM arbor motor - 5 HP, 45 RPM roll feed gear motor - 1 HP unitized pressroll lift hydraulic power unit - 32", 8' infeed b...

48" Bush Chipper

• Manufacturer: Bush

48" Bush Chipper - Top feed - Top discharge - 6 knives - with motor

58" Nicholson Chipper

• Manufacturer: Nicholson

58" Nicholson Chipper LH - Horizontal infeed, top discharge - 6 knife - 12" x 18" throat - Some spare knives, clamps and counter knives - Disk is in good shape - Located in Southern Interior of BC

56" SODERHAMN CHIPPER

- right hand - 6 knife - horizontal infeed, bottom discharge - c/w drive sheave - some spare knives - no motor

112" Precision Chipper

• Manufacturer: Precision

- 32" capacity - 8 knife - Horizontal in, bottom out - Arbor speed 375 RPM - No jack shaft drive assembly - No motors or starters (was driven with 2 @ 600 HP) - Some spare knives and clamps

92" Murco Chipper

• Manufacturer: Murco

- Manufactured in 1984 - Drop feed / top discharge - Left hand - 15 knife - Pneumatic operated brake - 327 RPM - Gear reducer - c/w 1000 HP motor, 1200 RPM, 2300 volt - c/w spare disk

48" CAE Chipper - LH

• Manufacturer: CAE

- 4 knife - Horizontal in - Bottom out - 100 HP, Toshiba high efficiency, 1800 RPM, 460 volt (not included) - No sheave on chipper - One (1) set of knives mounted in Chipper - Some pocket wear

60" CME Norman Chipper

• Manufacturer: Norman

- Drop feed, bottom discharge - 16 knife - c/w infeed chute (14" x 16") - 250 HP, 460 volt motor (ODP) - Motor is direct coupled to shaft c/w soft start - Still installed (1978) - Chipper is still operational - S...

43" Nicholson Disc Chipper

• Manufacturer: Nicholson

- LH (spout under shaft - horizontal feed) - Maximum 10" diameter round - 4 knife - Built in 1999 (start up 2000) - Disc - 650 RPM - Rechipper chip spout added on to top of chipper - Parts book available - Recomm...

60" West Salem Chipper

• Manufacturer: West Salem

- Drop feed - Bottom discharge - Model PK60DB - Serial #23965B - 4 knives (20" long) - Knife length 20" long - Throat size 18" x 18" - 60" diameter disk - Left side of hoot pivots to open for knife change - Motor...