Used Processing in Gauteng, South Africa

Three Gang Mould (UTCM-0892.2)
- new
Strength Tests Product Code: Description: All moulds have been manufactured from steel except UTCM-0898 moulded using engineered plastic and all internal surfaces are machined. Minimum surface hardness of UTCM- 0...
Alberton, South Africa
Vibrating Machine (UTCM-0930)
- new
Strength Tests Product Code: Description: The UTCM-0930 Vibrating Machine is used for the preparation and compaction of 70.7 mm mortar cube specimens. The mould table is mounted on four springs attached to an ecc...
Alberton, South Africa
Slaking Vessel (UTCM-0681)
- new
Compression and Flexural Machines UTCM-0681 Slaking Vessel is used to determine the yield of lime by leaving the lime sample to slake into. Stainless steel made and double walled insulated. The cylinder has insid...
Alberton, South Africa
Centrifuge Extractor (UTAS-0030)
- new
Analysis of Bituminous Mixtures Product Codes: Description: The Centrifuges are used for the determination of the bitumen percentage in bituminous mixtures. All models comprise a removable precision-machined roto...
Alberton, South Africa
Laboratory Air Compressor (UTGE-3700)
- new
Laboratory Equipment Product Codes: Description: UTGE series Laboratory Air Compressors are durable machines for supplying compressed air required by several analyses in material testing. The UTGE-3700 is supplie...
Alberton, South Africa
MUFFLE FURNACE – LABORATORY (LES-LM RANGE)
- new
The LES Laboratory Muffle Furnace range is designed with the exacting requirements of the laboratory environment in mind. State of the art control systems ensure consistent and reliable results. Our tried and tes...
Alberton, South Africa
Holiday / Spark Detector for Anti-Corrosion Coatings on Metal (LES-HD60B)
- new
Clear backlit LCD display of output voltage Used for quick non-destructive inspection of porosity, pinholes and other faults in non-conductive coatings and linings on metal substrates Output voltage: Pulsed 0.5 ...
Alberton, South Africa
Hand Operated Hydraulic Specimen Extruder (UTGE-0082)
- new
Laboratory Testing The UTGE-0082 Hand Operated Hydraulic Extruder is designed for extruding specimens from 50mm (2”) to 125mm (5”) (outer dia.) shelby sample tubes and moulds such as proctor, CBR and marshall mou...
Alberton, South Africa
Motorized Hydraulic Specimen Extruder, Horizontal Type, 60 kN Capacity (UTGE-0084)
- new
Laboratory Testing 2050x500x1250 (shipping) The UTGE-0084 Motorized Hydraulic Extruder, Horizontal Type, is designed for extruding specimens from 50mm (2”) to 125mm (5”) (outer dia.) shelby sample tubes and mould...
Alberton, South Africa
Motorized Hydraulic Specimen Extruder Vertical Type (UTGE-0086)
- new
Laboratory Testing The UTGE-0086 Motorised Hydraulic Extruder, Vertical Type, is designed for extruding specimens from 50mm(2”) to 125mm(5”) (outer dia.) shelby sample tubes and moulds such as proctor, CBR and...
Alberton, South Africa
Jolting Table (UTCM-0890)
- new
Strength Tests Product Code: Description: Jolting Table is used for compacting of cement specimens in 40x40x160 mm mould and consists of mould table seated on a rotating cam driven at 60 r.p.m. The falling height...
Alberton, South Africa
Curing Cabinet (UTCM-1100)
- new
Strength Tests Product Code: Description: The UTCM-1100 Curing Cabinet is used for curing of cement, concrete or other cement-based mortar specimens. The curing cabinet provides (20 ± 1) °C temperature and over 9...
Alberton, South Africa
Test Jigs for Compression and Flexure (UTCM-4200A)
- new
Compression and Flexural Machines Product Code: Due to the continuous development of our products, the goods supplied may vary in detail to that illustrated on this Website.
Alberton, South Africa
Tensile Adhesion Strength Test Apparatus (UTCM-4223)
- new
Compression and Flexural Machines Product Code: Description: UTCM-4223 Tensile Adhesion Strength Test Apparatus can be fitted to the UTEST Cement Compression or Compression/Tension testing machines. This apparatu...
Alberton, South Africa
Marshall / CBR / Proctor Specimen Extruder (UTGE-0080)
- new
- Manufacturer: Proctor
Field Inspection and Sampling The UTGE-0080 Extruder is designed to easily extrude specimens from marshall and CBR, standard and modified proctor moulds. The capacity of the extruder is 30 kN and is supplied comp...
Alberton, South Africa